B&S AIR FILTER 13.5-17.5HP R140514
- B&S air filter 13.5-17.5HP R140514 - high quality replacement Briggs & Stratton 698083. Effectively protects the engine of lawnmowers and tractors, provides full power, less fuel consumption and longer machine life.
B&S 13.5-17.5HP AIR FILTER R140514 - powerful protection for Briggs & Stratton engines
B&S 13.5-17.5HP air filter - what it is and why it is so important?
B&S 13.5-17.5HP air filter R140514 is a high-quality filter element designed for Briggs & Stratton engines from 13.5 to 17.5 HP. This is the element responsible for cleaning the air sucked into the combustion chamber from dust, dust, grass and other contaminants that become airborne during the operation of the lawnmower or garden tractor. Clean air is essential for proper combustion of the fuel-air mixture, which directly translates into power, operating culture and the durability of the drive unit.
This product is equivalent to the original Briggs & Stratton filter with part number 698083, so that it fits perfectly in place of the used cartridge and ensures full compatibility with the engine. Special pleated design and carefully selected filter material guarantee high dirt holding capacity while maintaining adequate airflow.
Regular replacement of the air filter avoids loss of power, increased fuel consumption, excessive smoke and, above all, costly repairs due to dirt entering the cylinder. Investing in a B&S 13.5-17.5HP R140514 filter is a simple way to extend the life of your lawn mower or garden tractor.
Where does the B&S 13.5-17.5HP R140514 air filter fit, and what machines it fits on??
The B&S 13.5-17.5HP R140514 air filter mounts directly into the air filter housing, usually located on the side or above the Briggs & Stratton internal combustion engine. Access to it is deliberately simplified - just unscrew or unfasten the housing cover, remove the old cartridge and insert the new filter, paying attention to the correct position of the seal.
The filter is designed for a wide range of machines equipped with Briggs & Stratton engines of 13.5-17.5 hp, such as:
- garden tractors for large lawns,
- ride-on mowers used by gardening companies,
- premium petrol mowers,
- other machines with B&S engines of the specified power, used in horticulture and small agriculture.
Thanks to its standard dimensions and compatibility with the original number 698083, this filter is suitable for both hobby equipment used at home and heavy-duty professional machines. For example, the owner of a garden tractor used a few hours a week to mow a large garden may change the filter himself once a season, while a landscaping company will do it up to several times a year, ensuring that the fleet of machines will work reliably.
Use of B&S 13.5-17.5HP R140514 air filter in daily operation
B&S 13.5-17.5HP air filter R140514 is used wherever the engine is exposed to an environment full of dust, dirt and grass clippings. These are mainly:
- Regular mowing of the lawn around the house - When running a conventional lawn mower or tractor, dust and dust rise from the ground and the filter effectively traps them, protecting the engine from scratching the cylinder and piston rings.
- Maintenance work on large green areas - In parks, playgrounds or corporate areas where equipment runs longer and more intensively, a reliable air filter is crucial for consistent power and low fuel consumption.
- Mowing of neglected, dusty and dry areas - In areas where the grass has not been mowed for a long time or there is a lot of sand and fine dirt, the filter prevents rapid wear and tear of the engine, which is important for occasional but heavy cleaning work.
Using the right air filter provides tangible benefits: even operation at full power, easier engine starting, lower fuel and oil consumption, and longer drive unit life. This allows the user - both individual and professional - to focus on efficient work instead of equipment failures.
B&S air filter 13.5-17.5HP R140514 - quality, durability and reliability in practice
The B&S 13.5-17.5HP R140514 filter features a rugged, refined design that is engineered for long, trouble-free operation. Pleated filter material provides a large active surface area, which increases filtration efficiency and prolongs the interval between replacements. Sturdy, flexible frame facilitates installation and ensures that the filter fits tightly in the housing, eliminating the risk of unfiltered air entering the engine.
In practice, this means that the owner of a lawnmower using this filter can enjoy even operation of the machine throughout the season, whether he is mowing a neat lawn at home or a heavily used commercial area. Professional horticultural companies will also appreciate the low unit cost of the filters while significantly reducing the risk of downtime caused by failures due to contamination in the engine.
Replacing the air filter of the B&S 13.5-17.5HP R140514 sufficiently often is therefore a simple but highly effective way to maintain high equipment efficiency and optimum operating costs - both in a small garden and in the company's expansive fleet of machines.
B&S air filter 13.5-17.5HP R140514 - technical data and markings
Key technical information and product designations have been collected below to help you select the right filter for your equipment:
- Product type: air filter for Briggs & Stratton internal combustion engines
- Power range of motors: 13.5-17.5 HP
- Briggs & Stratton original number: 698083
- Product code: R140514
- EAN code: 8023668030204
- Purpose: lawn mowers, garden tractors, garden and municipal machines with B&S engines
- Construction: pleated filter on a flexible base, with a handle for easy installation and removal
The markings used (original number. 698083, code R140514, EAN 8023668030204) allow you to quickly and unambiguously match a product to a specific Briggs & Stratton engine model and make it easy to order filters for service or company spare parts stores.
Easy filter replacement B&S 13.5-17.5HP R140514 - saving time and money
One of the significant advantages of the B&S 13.5-17.5HP R140514 air filter is its very simple installation, which does not require specialized tools or service experience. In most models of lawnmowers and garden tractors, changing the filter comes down to a few steps:
- Turning off the engine and waiting for it to cool down.
- Unfasten or unscrew the air filter housing cover.
- Removal of the old, dirty filter cartridge.
- Cleaning the inside of the case from dust and debris.
- Inserting a new air filter B&S 13.5-17.5HP R140514, according to the markings and shape.
- Closing the filter housing.
As a result, any user - even without experience - can take care of the basic maintenance of their machine on their own. For example, before a busy mowing season, just take a few minutes to change the filter and you'll get noticeably better operating culture, easier starting and fuel savings for many more hours of operation.
Original technical description of the product
B&S air filter 13.5-17.5HP
no. 698083
FAQ - Frequently asked questions about B&S air filter 13.5-17.5HP R140514
Question 1: How often should I change the air filter on my lawn mower or tractor?
Answer: It is recommended to change the air filter at least once a season, and even more often in the case of intensive use or work in a very dusty environment. If you notice a drop in engine power, difficulty starting, or a visibly dirty filter, it's a good idea to replace it right away.
Question 2: How do I know that the B&S 13.5-17.5HP R140514 filter fits my engine?
Answer: The primary determinant is the compatibility with Briggs & Stratton original number 698083 and the engine power range of 13.5-17.5 hp. It is a good idea to compare the shape and dimensions of the currently installed filter with the new cartridge, as well as check the markings in the technical documentation or on the engine nameplate.
Question 3: Can I clean the air filter instead of replacing it?
Answer: Gently cleaning the filter of loose dust can be a temporary solution, but engine manufacturers recommend periodic replacement of the cartridge with a new one. A dirty and outdated filter no longer provides adequate filtration, which can lead to engine damage and increased fuel consumption.
Question 4: What are the benefits of regularly changing the air filter?
Answer: Regular replacement of the B&S 13.5-17.5HP R140514 air filter provides better engine protection from contaminants, stable power, easier starting, lower fuel consumption and longer life of the drive unit. This is a small cost that translates into clear savings in the long run.
Question 5: Do I have to have the filter replaced by a service center?
Answer: No, replacing the air filter is a simple operation and in most cases you can do it yourself by following the machine's instruction manual. However, if you do not feel confident, you can have a service technician replace it - the cost of the service will usually be small, and the machine will additionally be checked for overall technical condition.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.