AIR FILTER B&S 18-22 INTEK R140429
- B&S 18-22 Intek air filter R140429 (replacement 499486S) for Briggs & Stratton engines. Provides effective filtration, full power, lower combustion and longer life for tractors and riding mowers.
B&S 18-22 Intek air filter
no. 499486S
What is the B&S 18-22 Intek R140429 air filter and why it is crucial for your engine?
B&S 18-22 Intek air filter R140429 is a high quality filter element designed for Briggs & Stratton Intek series engines in the 18-22 hp range. Its task is to effectively clean the air sucked into the combustion chamber from dust, dust, grass, sand and other impurities that can cause accelerated wear of engine components. The filter is made of a precisely pleated, dense paper medium embedded in a durable, warp-resistant plastic frame.
Thanks to the use of a dedicated air filter, the internal combustion engine operates with optimal power and full efficiency, maintaining the proper parameters of the fuel-air mixture. This directly translates into lower fuel consumption, easier starting, lower emissions and a significant extension of the life of the entire drive unit.
Model R140429 is equivalent to the original Briggs & Stratton filter with part number 499486S, which guarantees a perfect dimensional match and performance compliance with the requirements of the engine manufacturer.
Where the B&S 18-22 Intek R140429 air filter is installed?
B&S 18-22 Intek air filter R140429 is mounted in the air filter housing on the top or side of the Briggs & Stratton Intek series engine. The housing is most often located in an easily accessible place - after removing a few screws or unfastening the latches, you can quickly remove the used cartridge and insert a new one. The filter cartridge is designed in such a way that its replacement is possible without the use of specialized tools, making it easy to carry out basic maintenance for both professional and amateur users.
Typical applications of this filter are:
- engines installed in garden tractors and riding mowers,
- briggs & Stratton Intek 18-22 hp horizontal and vertical engines in garden machinery,
- drive units used in municipal and professional landscaping equipment.
A properly installed air filter ensures a tight connection with the housing and intake port, so that only properly filtered air enters the engine. This is especially important in dusty conditions, when mowing dry grass, weeding or working on sandy, dry ground.
Use of B&S 18-22 Intek R140429 air filter in daily operation
B&S 18-22 Intek air filter R140429 is used in many popular garden and municipal equipment. It is most commonly used in:
- garden tractors - provides stable power when mowing large areas of lawns and recreational areas,
- ride-on mowers - Protects the engine during prolonged operation in dust and floating grass particles,
- professional greenery machines - including scarifiers, aerators or sweepers powered by Briggs & Stratton Intek engines.
In daily use, the filter performs well during:
- regular mowing of the home lawn - guarantees a light start and even engine operation from spring to autumn,
- intensive work in service companies - where machines operate for several hours a day in demanding field conditions,
- seasonal mowing of meadows, orchards or allotments - reduces the risk of aspiration of larger dust particles and organic debris.
Changing the air filter regularly increases the reliability of the unit, reduces service downtime and minimizes the risk of costly engine repairs due to contaminants entering the cylinder.
Briggs & Stratton Intek 18-22 hp air filter R140429 - key user benefits
Briggs & Stratton Intek 18-22 hp R140429 air filter is designed to maximize engine protection while keeping air flowing freely. The main benefits of its use are:
- Optimal engine performance - The precisely pleated filter surface guarantees a high flow of clean air, allowing the engine to reach its full working power. This is felt especially when mowing dense, tall grass, when the drive unit does not "choke" and maintains a stable rpm.
- Protection against mechanical wear and tear - retention of dust and microscopic dirt particles prevents scratches and accelerated wear of the cylinder, piston and rings. In practice, this means longer engine life and less expenditure on repairs.
- Lower fuel consumption and cleaner operation - proper supply of clean air influences efficient combustion of the fuel mixture. The machine uses less gasoline, generates fewer exhaust fumes and runs more evenly, which will be especially appreciated by users who use the equipment for many hours a day.
For example, the user of a garden tractor equipped with a Briggs & Stratton Intek engine, regularly replacing the R140429 air filter with a new one, can count on trouble-free starting after winter, no sudden drops in power during mowing, and reduced unpleasant smoke from the muffler.
Quality, durability and reliability of B&S 18-22 Intek air filter R140429
B&S 18-22 Intek R140429 air filter is made of high-quality materials that meet the requirements of internal combustion engine manufacturers. The dense pleated filter paper provides a large working area in a compact size, while the sturdy, sealed plastic frame allows it to retain its shape even under prolonged use in changing weather conditions.
Key advantages related to durability and reliability:
- stable construction resistant to vibrations and shocks typical of tractor and mower operation,
- resistance to moisture and dirt - the filter retains its properties even when working in wet grass,
- precise fit with the air filter housing - minimizes the risk of bypassing contaminated air by shortcuts.
In practice, this means that the user can count on reproducible filtration quality throughout the life of the cartridge. With proper maintenance of the device and replacement of the filter according to service recommendations, the engine retains its performance for many seasons, and the risk of failure due to contamination is significantly reduced.
Technical parameters of the air filter B&S 18-22 Intek R140429
The following is a compilation of key technical data useful in selecting the right air filter for your device:
- Purpose: briggs & Stratton Intek series 18-22 hp engines
- Replacement part number: R140429
- Briggs & Stratton original number: 499486S
- Filter type: air cartridge, pleated paper medium
- Frame: durable plastic
- Application: garden tractors, ride-on mowers, garden and municipal machines with B&S Intek 18-22 hp engines
- Mounting type: replacement cartridge for air filter housing
Before buying, it is a good idea to compare the filter number with the engine nameplate or the cartridge used so far. This gives you the assurance that the filter will be a perfect fit and the replacement will go quickly and smoothly.
How to take care of B&S 18-22 Intek R140429 air filter to keep your engine running longer?
Proper operation of the air filter has a direct impact on the life of the engine. For the B&S 18-22 Intek R140429, it is recommended that the condition of the cartridge be checked regularly - especially during periods of heavy machine use.
Basic operational recommendations:
- checking the condition of the filter every 25 hours of operation, or more often if the device is used in a very dusty environment,
- changing the filter every season or as recommended by the engine manufacturer,
- do not wash the paper filter in water or gasoline - this can damage the filter medium and reduce the effectiveness of filtration,
- gentle cleaning of loose dust with compressed air (from a sufficient distance) can help extend the service life, but it is not a substitute for regular replacement with a new cartridge.
For example, the owner of a garden tractor used regularly on a large plot may adopt a policy of changing the air filter at the beginning of each mowing season. This ensures that the engine starts the season in ideal operating conditions, minimizing the risk of failure during the most intensive period.
FAQ - Frequently asked questions about B&S 18-22 Intek R140429 air filter
1. For which engines the B&S 18-22 Intek R140429 air filter fits?
B&S 18-22 Intek air filter R140429 is designed for Briggs & Stratton Intek series 18-22 hp engines. It is most often found in garden tractors, ride-on mowers and other garden and municipal machines equipped with these drive units.
2. What is the original number corresponding to this filter?
The equivalent of the R140429 filter is the original Briggs & Stratton filter with part number 499486S. If such a number appears in the instructions or on the filter used so far, you can safely use the presented model.
3. How often should you change the air filter on a Briggs & Stratton Intek engine?
As a standard, it is recommended to change the air filter at least once a season or every 50 hours or so of operation, depending on the intensity of use. In dusty conditions (dry grass, dust, dust) it is advisable to shorten this period and check the condition of the filter every ten or so hours of operation.
4. Can B&S 18-22 Intek R140429 air filter be cleaned and reused?
The paper filter is a consumable item designed primarily for replacement. You can gently clean it of loose dirt with compressed air, but do not wash it in water or use chemicals. For full effectiveness of engine protection, it is recommended to regularly replace with a new cartridge.
5. What are the symptoms of a worn or clogged air filter?
The most common symptoms of a worn out filter include a decrease in engine power, rough running at speed, difficulty starting, increased fuel consumption and darker smoke from the muffler. If you notice such symptoms, one of the first diagnostic steps should be to inspect and possibly replace the air filter.
6. Is it difficult to install the B&S 18-22 Intek R140429 air filter yourself?
No, replacing the filter is simple and can be done by yourself. On most models, simply open the filter housing, remove the old cartridge, gently clean the interior of loose debris, and then insert the new R140429 filter in the same place, taking care to properly align and close the lid.
7. Can using the wrong filter damage the engine?
Yes, using an improperly sized or low-quality filter can result in leaks in the intake system, allowing contaminants to enter the engine. This can lead to accelerated wear of working components and costly repairs. Therefore, it is worth using a filter matched by number and parameters, such as B&S 18-22 Intek R140429 corresponding to the original 499486S.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.