SET OF MEMBRANES ZAMA NO. GND-27 R126357
- Original ZAMA diaphragm set No. GND-27 R126357 for ZAMA diaphragm carburetors. Ideal for reconditioning chainsaws, scythes and petrol trimmers. Guaranteed tightness, easier starting and stable engine operation.
SET OF MEMBRANES ZAMA NO. GND-27 R126357 - professional repair set for ZAMA carburetors
ZAMA diaphragm set No. GND-27
SET OF MEMBRANES ZAMA NO. GND-27 R126357 is an original set of diaphragms and seals designed for professional reconditioning of ZAMA carburetors used in saws, trimmers, hedge trimmers and other manual combustion equipment. It will restore full efficiency of the fuel supply system, improve the engine's operating culture and significantly extend the life of the entire unit.
ZAMA GND-27 R126357 membrane kit - what it is and what it consists of?
ZAMA GND-27 R126357 diaphragm set is a original service set for ZAMA brand diaphragm carburetors. Such a set usually includes:
- fuel pump diaphragm,
- control diaphragm (diaphragm),
- a set of precision-cut gaskets,
- small sealing parts needed when reassembling the carburetor.
These components are responsible for proper fuel metering and maintaining proper system pressure. Replacing worn diaphragms with new ones eliminates problems such as difficult cold starting, stalling under load or unstable idle speed.

Where is the ZAMA membrane set installed No. GND-27 R126357?
ZAMA diaphragm set No. GND-27 R126357 is mounted directly in the ZAMA diaphragm carburetor. It is the component responsible for preparing the fuel-air mixture in two-stroke engines used in light garden and forestry equipment. The kit is designed for specific models of ZAMA carburetors marked with a symbol consistent with the original number GND-27.
Typical application sites for ZAMA carburetors, and thus for the GND-27 R126357 diaphragm kit, are m.in.:
- chainsaws for cutting firewood and household work,
- trimmers and petrol scythes used in gardens, orchards and on properties,
- diesel hedge trimmers,
- other hand-held combustion equipment in which the manufacturer has used a ZAMA carburetor compatible with the GND-27 kit.
Installation is carried out after removing the carburetor from the device, disassembling it, thoroughly cleaning the fuel channels and replacing all diaphragms and seals with new ones from the ZAMA GND-27 R126357 kit. This way you are assured of full tightness and proper operation of the component.
Key benefits of using the ZAMA GND-27 R126357 membrane kit
Choosing the original ZAMA GND-27 R126357 diaphragm kit brings a number of tangible benefits to the user:
- Reliable compatibility - Original components are perfectly matched to dedicated ZAMA carburetor models for easy installation and reduced risk of leaks.
- Stable engine operation - New diaphragms restore proper fuel metering, improving acceleration, power and drive unit culture.
- Lower fuel consumption - precise carburetor operation translates into more efficient combustion of the mixture and less combustion for the same working efficiency.
- Hassle-free startup - after regeneration of the carburetor, the equipment fires up much more easily both cold and hot.
- Increased durability of the device - A properly powered two-stroke engine is less prone to overheating, seizure and accelerated wear and tear.
In practice, this means that after replacing the membranes using the ZAMA GND-27 R126357 kit, your chainsaw, scythe or trimmer will regain performance similar to that of a new device, and work in the garden or forest will become more convenient and faster.

Use in daily operation - when it is worth replacing ZAMA carburetor diaphragms?
Diaphragms in the carburetor are made of special fuel-resistant plastics and rubbers, but over time they age, harden or crack. In practice, it is worthwhile to reach for a set of ZAMA membranes No. GND-27 R126357 when you observe:
- problems with firing up the equipment, especially after a long stop,
- extinguishing the engine after adding gas or under load,
- uneven idle speed and "rippling" speed,
- a drop in the power of a chainsaw or brushcutter,
- visible fuel leaks from around the carburetor.
Regular replacement of membranes is a simple maintenance activity that significantly extends the life of equipment used on a daily basis in the garden, orchard or landscaping company. With the use of the original ZAMA GND-27 R126357 kit, you can continue the intensive operation of your machines without any worries.

Why choose the original ZAMA GND-27 R126357 diaphragm kit?
There are many replacements available on the market, but this original ZAMA GND-27 R126357 diaphragm kit guarantees the highest quality of workmanship and parameters in accordance with the requirements of the carburetor manufacturer. This means:
- exact fit - No need for alterations, trimming, or gaskets,
- resistance to fuels and additives - The materials used are suitable for modern gasoline blends,
- repeatability of parameters - Each diaphragm has a preset flexibility and thickness to ensure stable operating pressures in the fuel system,
- job security - A well-functioning carburetor minimizes the risk of engine overheating resulting from improper mixture composition.
Investing in an original set of ZAMA membranes No. GND-27 R126357, you save time and money on repeated repairs, and you are assured that the fuel system of your machine meets the parameters set by the manufacturer.
Examples of ZAMA GND-27 membrane set applications in practice
The ZAMA GND-27 R126357 diaphragm kit will be perfect for both residential and professional users:
- In the home garden - to restore the efficiency of a chainsaw used to cut firewood, a trimmer to keep the lawn tidy or a hedge trimmer to form a hedge.
- On the farm and in the orchard - To repair equipment necessary for the care of trees and shrubs, including chainsaws and brushcutters used throughout the season.
- In service companies - green area maintenance crews that need reliable equipment ready to work every day.
In any of these situations, a functioning carburetor is the basis for trouble-free operation - a set of ZAMA diaphragms No. GND-27 R126357 allows you to quickly and effectively regenerate the component, so that the tool can return to intensive work.
FAQ - Frequently asked questions about the ZAMA membrane kit no. GND-27 R126357
1. For which carburetors ZAMA GND-27 R126357 diaphragm kit fits?
The kit is designed for selected models of ZAMA brand diaphragm carburetors marked with original number GND-27. Before buying, it is a good idea to compare the carburetor symbol or part number with the technical documentation of the device.
2. Is it difficult to replace the diaphragms in the carburetor?
For someone with basic service skills and access to simple tools, replacing membranes is relatively easy. The most important thing is to keep it clean, clean the carburetor thoroughly, and position the new gaskets and diaphragms correctly.
3. How often should you replace the diaphragms in a ZAMA carburetor?
The frequency of replacement depends on the intensity of use and the quality of the fuel used. With regular use of gardening equipment, it is recommended to check the condition of the diaphragms at least once a season and to replace them at the first signs of engine problems.
4. Can using non-original membranes be risky?
Cheap replacements may have inferior material quality, inadequate thickness or shape, leading to leaks, unstable engine operation and, in extreme cases, even engine damage. The original ZAMA GND-27 R126357 kit minimizes such risks.
5. What symptoms indicate worn diaphragms in the carburetor?
The most common symptoms include difficulty starting the engine, stalling under load, uneven idling, loss of power, and visible fuel leaks from the carburetor. In such situations, replacing the diaphragms using ZAMA kit no. GND-27 R126357 is the best solution.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.




