BATTERY 20AH 206X91X164 MM R106286
- The 20Ah 206x91x164 mm R106286 battery is a powerful lead-acid 12-volt power source for motorcycles, scooters, ATVs and garden machinery. Ensures reliable starting, high durability and shock resistance. The ideal choice for ATVs.
20AH battery 206x91x164 mm
The 20Ah 206x91x164 mm R106286 battery is an efficient and long-lasting power source designed for use in motorcycles, scooters, ATVs, utility vehicles, and selected garden machinery and small specialty vehicles. With a capacity of 20Ah and compact dimensions (length 206 mm, width 91 mm, height 164 mm), the battery is ideal wherever reliable engine starting, load resistance and trouble-free operation over many seasons are important.
The battery is a classic 12-volt lead-acid battery with increased capacity, suitable for cycling and starting work. The design of the housing allows stable installation in standard battery baskets of the indicated dimensions, and the universal terminals make it easy to fit into the vehicle's electrical system.
What is a 20Ah 206x91x164 mm R106286 battery and how it works?
Battery 20Ah 206x91x164 mm R106286 is a lead-acid starter battery, mainly used in vehicles with internal combustion engine. Its task is to provide a high enough current in a short time to start the engine starter, and then stabilize the voltage in the vehicle's electrical system.
The interior of the battery consists of lead plates immersed in electrolyte. During charging, electrical energy is stored in the form of chemical reactions that reverse when discharged (e.g., during engine starting), releasing energy into the system. The capacity of 20Ah means that the battery can theoretically give out a current of 1 A for 20 hours or 20 A for 1 hour - in practice, this ensures reliable and dynamic starting even in more difficult conditions.
It's a proven, easy-to-use and cost-effective solution, recommended for users looking for a trusted, classic battery for everyday vehicle use.
Where the 20Ah 206x91x164 mm battery is mounted R106286? Typical locations and application examples
Battery 20Ah 206x91x164 mm R106286 is suitable for installation in vehicles and equipment that use 12 V installation and a battery basket with dimensions that match its housing. The most common installation sites are:
- Touring motorcycles and choppers - usually under the seat, in the side technical trunks or in the frame under the fuel tank. High capacity ensures reliable starting even with extensive lighting and additional accessories.
- Quads and ATVs - In the front or rear technical compartment, often protected by guards against mud and water. The 20Ah battery is great for powering winches, LED lights or additional off-road accessories.
- Scooters, small utility vehicles and garden machinery - in a cover under the floor or in a special service compartment. Compact size makes it easy to install on riding mowers, micro-tractors or work carts.
Before buying, it's a good idea to measure the mounting space and compare it with the dimensions of 206x91x164 mm, as well as verify the type of clamps and the direction of the terminals, so that the battery perfectly fits the specific vehicle model.
Battery 20Ah 206x91x164 mm R106286 - the most important features that give real benefits to the user
When choosing a battery for a motorcycle or quad, it is not only the price that matters, but above all the durability and reliability. The 20Ah 206x91x164 mm R106286 is distinguished by a number of features that translate into comfort in daily use:
- High capacity 20Ah - ensures a strong engine start, even after a prolonged vehicle standstill or in lower temperatures. This will be especially appreciated by motorcyclists who use the vehicle seasonally and expect the motorcycle to fire up after winter without any problems.
- Compact dimensions 206x91x164 mm - make it easy to install on many popular models of motorcycles, quads and garden machinery. This makes the battery a universal choice, fitting standard battery baskets.
- Robust housing and shock resistance - Construction designed to work in harsh road and off-road conditions. An ideal choice for users of quads, ATVs and off-road machines where vibration, mud and bumps are present.
- Stable operating parameters - the battery maintains adequate voltage and performance for a long time, reducing the risk of unexpected discharge and protecting the vehicle's delicate electronics.
- Easy to operate and service - classic lead-acid technology is well known to mechanics and users, which simplifies diagnostics, charging and eventual regeneration.
In practice, this means that the user gets a product that he or she can rely on for daily commuting, weekend motorcycle trips, or when working with gardening equipment. Fewer start-up problems mean more time spent driving and working, and less time in the workshop.
Use of 20Ah 206x91x164 mm R106286 battery in everyday conditions
The 20Ah 206x91x164 mm R106286 battery is a versatile energy source that will work in many situations:
- Motorcycles and city scooters - Daily commutes to work, school or shopping require reliable starting regardless of the weather. A 20Ah battery ensures that the engine will start quickly even after several days of standstill.
- Recreational and utility quads - Off-road driving, towing a trailer, working with a snowplow or transporting loads over uneven ground. The battery powers the starter, lights, winch and additional accessories without performance drops.
- Garden machinery and small work vehicles - Tractor mowers, small tractors, soilers with electric starter or storage carts. Thanks to its robust design, the battery is resistant to dust, moisture and vibrations typical of work in the garden or on a construction site.
- Specialty and hobby equipment - Small boats with internal combustion engines, buggy vehicles, off-road go-karts or equipment used in workshops and hobby garages.
Thanks to standard lead-acid technology, the battery can be charged with most of the 12-volt battery chargers on the market, making it even easier to use at home.
Why choose 20Ah 206x91x164 mm battery R106286 - quality, durability, reliability
The decision to choose a battery has a direct impact on the reliability of the vehicle. Model R106286 was created for users who want a product that is durable and hassle-free for daily use. The main arguments in favor of this battery are:
- High quality workmanship - carefully crafted lead plates and a robust housing minimize the risk of mechanical damage and premature wear and tear.
- Long life - with proper operation and regular recharging, the battery retains its parameters for many seasons, which reduces service costs and reduces the need for frequent replacement.
- Reliability in difficult conditions - the battery stands up well to temperature fluctuations, typical of temperate climates, as well as operation in environments with increased humidity and dust (terrain, forest, household).
- Safety of use - housing design and suitable materials reduce the risk of electrolyte leakage and ensure stable operation under typical installation conditions for this type of battery.
By choosing a 20Ah 206x91x164 mm R106286 battery, you are investing in a product that minimizes the risk of unpleasant surprises - a discharged battery on the road, problems with starting the vehicle after the weekend or downtime for gardening equipment.
Technical data of 20Ah 206x91x164 mm battery R106286
- Product type: 12-volt lead-acid starter battery
- Capacity: 20Ah
- Nominal voltage: 12 V
- Length: 206 mm
- Width: 91 mm
- Height: 164 mm
- Product code: R106286
- EAN code: 8717101003077
- Application: motorcycles, scooters, ATVs, garden machinery, small utility vehicles (depending on the dimensions of the basket and the requirements of the vehicle manufacturer)
Before installation, it is always a good idea to check the vehicle manual for the recommended type and parameters of the battery to ensure full compatibility.
How to properly operate the 20Ah 206x91x164 mm R106286 battery to serve as long as possible?
The life of a battery largely depends on how it is used. The following tips will help you realize the full potential of the R106286:
- Regular recharging - with infrequent use of the vehicle, it is a good idea to recharge the battery with a charger every few weeks to avoid deep discharge.
- Connection control - regularly check that the clamps are well tightened and free of corrosion. Dirty contacts can cause voltage drop and start-up problems.
- Proper storage - During the off-season, it is best to store the battery in a dry and cool, but not freezing place, in a fully charged state.
- Choosing the right rectifier - for charging, use a charger designed for 12-volt batteries with a capacity close to 20Ah, with the function of current and voltage control.
By following these rules, the battery will maintain high efficiency for as long as possible, and the vehicle will be ready to work whenever it is needed.
FAQ - frequently asked questions about 20Ah 206x91x164 mm battery R106286
1. To which vehicles the battery 20Ah 206x91x164 mm R106286 fits?
The battery is mainly designed for motorcycles, scooters, ATVs, ATVs and selected garden machinery and small commercial vehicles. The fit is determined by the dimensions of the battery basket, the installation voltage (12 volts) and the requirements of the vehicle manufacturer.
2. Can I use this battery in a passenger car?
No, 20Ah 206x91x164 mm R106286 battery has too small capacity and different dimensions than typical car batteries. It is designed for smaller vehicles and machines with smaller capacity engines.
3. How long does such a battery last?
With proper operation, regular charging and avoiding deep discharges, the battery can last for several seasons. Actual service life depends on the intensity of use, operating conditions and maintenance.
4. What charger to charge a 20Ah battery with?
It is recommended to use a charger designed for 12-volt batteries with a capacity in the range close to 20Ah, preferably with an automatic charge termination function and current control, which protects the battery from overcharging.
5. Is the battery ready to install immediately after purchase?
In most cases, the battery is pre-charged, but it is a good idea to check its voltage before installation. If the vehicle has been standing for a long time or the battery has been stored for a long time, it is advisable to recharge with a charger to full capacity.
6. Do the dimensions 206x91x164 mm have to be identical to the old battery?
Ideally, the new battery should be as close in size as possible to the previous one, so that it can easily fit into the mounting basket and be securely mounted. Minor differences are acceptable, as long as they do not affect the stability of the assembly and connection of the clamps.
7. What 20Ah capacity means in practice?
The 20Ah capacity tells you how much energy the battery can store. In practice, this translates into reliable engine starting and the ability to power the vehicle's lights and electrical accessories for a sufficiently long time before needing to be recharged again.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.