SPARK PLUG NGK CMR6A R101187
- NGK CMR6A R101187 spark plug for lawnmowers and trimmers provides reliable starting, stable engine operation and reduced fuel consumption. Durable NGK electrodes guarantee reliability in tough conditions.
NGK CMR6A R101187 spark plug - what it is and why you should choose it?
Spark plug NGK CMR6A R101187 is a high-quality ignition system component designed for low-power engines used primarily in power cutters and trimmers. Its job is to produce a strong, stable spark in the combustion chamber to ensure reliable firing and proper combustion of the fuel-air mixture. In practice, this means easier engine starting, even operation under load and lower fuel consumption.
Brand NGK has been one of the leaders in the spark plug industry for years, and the model CMR6A is a proven solution for many popular gardening equipment. The product meets stringent quality standards, and its parameters have been selected for prolonged operation in harsh conditions - high temperature, humidity and high dust.
NGK spark plug for scythes and trimmers
Where is the NGK CMR6A R101187 spark plug installed and what equipment does it fit into??
Spark plug NGK CMR6A R101187 is mounted in the cylinder head internal combustion engine. This is a standard location in low-power single-cylinder engines used m.in. w:
- power cutters - both domestic and semi-professional, used to care for home lawns, plots of land and areas around businesses,
- trimmers - Ideal for fine finishing of lawn edges near fences, walls or flowerbeds,
- other gardening equipment with small two-stroke or four-stroke engines (depending on the equipment manufacturer's recommendations), such as small blowers, aerators or sweepers.
Replacing a spark plug is simple and usually comes down to disconnecting the spark plug pipe, unscrewing the old plug with a suitable wrench and screwing in the new one with the correct tightening torque. Regular replacement - in accordance with the device's instructions - keeps the engine in excellent condition and minimizes the risk of unplanned breakdowns during the season.
In everyday use, such as when mowing the grass around the house, trimming the overgrowth on the allotment or working on a larger area of greenery, a properly selected candle such as the NGK CMR6A, eliminates the problem of starter jerking, engine stalling when adding gas and power drops during prolonged operation.
Use of NGK CMR6A R101187 spark plug in practice - reliability, economy, convenience
NGK spark plug CMR6A R101187 has been designed for demanding users, for whom reliable operation of gardening equipment in all conditions is important. Thanks to its precisely selected electrical and thermal parameters, this candle provides:
- easy cold and hot start - important especially in the morning when you start mowing after a long break, and during the day when you frequently stop and start the machine,
- stable engine operation under load - During intensive mowing of dense grass, brush or weeds, without jerking or "interrupting" the ignition,
- cleaner combustion and lower fuel consumption - better afterburning of the fuel-air mixture translates into savings and less carbon build-up in the combustion chamber.
In practice, the user experiences this as greater comfort: the mower or trimmer responds faster to the gas, it does not lose power in tall grass, and technical interruptions related to cleaning the spark plug or replacing it occur far less often. This is especially important for those who do longer work on the plot, home gardens or communal areas.
With some ignition, exhaust pollutants can be lower, which is good for both the device and the environment. A well-chosen candle reduces excessive smoke and the smell of unburned mixture.
Key benefits of NGK CMR6A R101187 candle - quality, durability and engine safety
Choosing a candle NGK CMR6A R101187, you are investing in a long-lasting product that directly affects the life of your engine. The most important benefits from the user's point of view include:
- High wear resistance - electrodes made of materials with high heat and mechanical resistance ensure a long service life, even with frequent use of the scythe or trimmer.
- Resistance to exhaust fumes and carbon black - appropriately designed shape and materials used reduce carbon buildup, which means fewer ignition interruption problems and less need to clean the spark plug.
- Engine protection - Properly selected candle protects the engine from excessive heat and premature ignition, which translates into a lower risk of serious damage to the drive unit.
In everyday applications - whether for regular lawn mowing at home or intensive work at a gardening company - a durable spark plug reduces downtime and unscheduled service visits. This allows you to focus on your work rather than constantly diagnosing equipment firing problems.
The NGK CMR6A R101187 spark plug is also an item that, at a relatively small cost, can noticeably improve the comfort of older equipment. Replacing a worn-out spark plug with a new one often restores full power to the engine and eliminates problems with rough idling.
Technical parameters of NGK CMR6A R101187 spark plug (approximate)
To select a candle for a particular model of equipment, always check the markings in the instruction manual. Model NGK CMR6A R101187 it has typical design solutions for candles of this class, such as:
- Model designation: NGK CMR6A
- Catalog/System Code: R101187
- EAN code: 0087295012239
- Purpose: spark plugs for scythes and trimmers and other small internal combustion engines (as recommended by the machine manufacturer)
The combination of suitable thermal, electrical and mechanical parameters makes this candle often chosen as a replacement for the original by garden equipment manufacturers. This gives you the assurance that the component will work with your engine in an optimal way, ensuring its safety and high operating culture.
In real-life conditions of use - for example, when mowing a neglected area, where the mower operates for a long time at high speed - the properly selected technical parameters of the NGK CMR6A R101187 spark plug protect the engine from overheating and power drops.
How to take care of NGK CMR6A R101187 candle to make it last as long as possible?
Although the spark plug is a consumable component, its life can be significantly extended by following a few simple rules:
- Regularly check the condition of the candle - before and during the season, inspect the appearance of the electrodes and insulator. Excessive carbon buildup or discoloration may be an indication of improper engine operation or poor fuel quality.
- Use fuel with the right quality and proportions - in two-stroke engines, use a mixture of gasoline and oil according to the manufacturer's recommendations. Oil mixture that is too rich promotes carbon build-up on the spark plug.
- Replace the spark plug at the recommended intervals - Even the best candle wears out naturally over time. Replacement with a new one before the busy mowing season is a small cost that can save time and nerves.
By following these rules, you will ensure that your lawnmower or trimmer has a reliable ignition for a long time, and the plug NGK CMR6A R101187 will repay you with trouble-free operation.
FAQ - frequently asked questions about NGK spark plug CMR6A R101187
1. To which appliances the NGK CMR6A R101187 candle fits?
The NGK CMR6A R101187 spark plug is designed primarily for brushcutters and trimmers, as well as other equipment with small internal combustion engines. Before buying, it is a good idea to check in the manual or on the device's nameplate whether the CMR6A model is recommended by the manufacturer.
2. How often should you replace the NGK CMR6A spark plug??
The frequency of replacement depends on the intensity of use of the equipment and the quality of the fuel. At home, it is a good idea to check the condition of the candle at least once a season and replace it every 1-2 seasons. In professional applications, it is advisable to inspect and replace more often as soon as you notice difficulty starting or a drop in engine power.
3. What are the symptoms of spark plug wear?
Typical symptoms of a worn or dirty spark plug include: difficult firing, rough idle, loss of power during mowing, increased smoke, and frequent stalling after adding gas. In such situations, it is a good idea to inspect and possibly replace the spark plug first.
4. Can the NGK CMR6A R101187 candle be installed by itself?
Yes, in most cases plug replacement is easy and you can make it yourself, using the right candle wrench. However, it is important to be careful, not to overheat the engine before removal, and to properly tighten the new plug according to the manufacturer's recommendations.
5. Will an original NGK plug improve the operation of an older petrol scythe?
In many cases, the installation of a new, original spark plug NGK CMR6A R101187 significantly improves the operating culture of older equipment. The engine fires more easily, runs more evenly and responds better to load. A simple and inexpensive way to refresh the performance of your scythe or trimmer.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.