STARTER CABLE 3.5 MM OO-SPA560126
- Durable, braided 3.5 mm starter cord OO-SPA560126 (100 m roll) for lawnmowers, chainsaws, brushcutters, generators and other machines. Ideal for service shops, gardening companies and demanding home users.
Starter cable 3.5 mm 100 m is a high-quality, heavy-duty starter cord designed for manual starters on combustion equipment. With a diameter of 3.5 mm and a length of 100 m, it is ideal for professional service workshops, spare parts stores, as well as demanding home users who expect reliability and long life of the starter cord.
What is the 3.5 mm starter cable OO-SPA560126 and how does it work?
Starter cable 3.5 mm OO-SPA560126 is a specialized braided cable made of durable synthetic fibers, designed to transmit the starting force from the handle (grip) to the starter mechanism in combustion equipment. When you pull the handle, the cable winds and unwinds on the starter drum, setting the engine shaft in motion and enabling it to start the engine.
The 3.5mm diameter is a universal standard used on many popular models of lawnmowers, chainsaws, brushcutters, tillers or power generators. Braided construction provides high tensile and abrasion resistance, and properly selected elasticity improves comfort and reduces the risk of line breakage during a sudden jerk.
Installation of the 3.5 mm starter cable OO-SPA560126 - where and how you apply it?
Starter cable 3.5 mm OO-SPA560126 is installed in manual starters of combustion equipment. It is placed on the drum (spool) of the starter mechanism, threaded through the guides and led outside the housing, where it is attached to the starter bracket. It can be used as:
- replacement cable when repairing a damaged starter,
- service line in repair shops - from the roll we cut off exactly as much as needed,
- line for upgrading or reconditioning older combustion equipment.
Typical mounting locations for the 3.5mm cable OO-SPA560126:
- lawn mowers (push and self-propelled),
- petrol chainsaws and chainsaws,
- scythes and petrol trimmers,
- leaf blowers, scarifiers, garden aerators,
- power generators and small motor pumps,
- soilers, compactors, small construction machines.
In practice, the replacement is as follows: dismantle the starter cover, remove the old or damaged cable, cut the appropriate section of the new cable from the 100 m reel, secure the end of the cable in the drum, wind a few coils, then thread through the guide holes and attach to the starter bracket. Thanks to the long roll, you get full freedom to adjust the length to your specific device model.
Use of starter cord 3.5 mm 100 m OO-SPA560126 in daily operation
Starter cord 3.5 mm 100 m is used both in domestic and professional use. Thanks to the considerable length of the roll (100 m), the product is particularly attractive for:
- service and repair shops - One roll is sufficient for dozens of repairs of various combustion equipment, which significantly reduces the unit cost of replacement,
- gardening and construction companies - constant access to the line allows quick response to equipment failures during the busy season,
- individual users - the role of supplies for many years, for all domestic combustion machines.
Examples of daily use:
- replacing a worn cord in a petrol mower after several seasons of intensive operation,
- quick repair of a petrol chainsaw in the woods or on the allotment - all you need to carry is a properly cut section of cord,
- regeneration of the starter in the generator, which must be ready to work in case of power failure.
Starter cable 3.5 mm OO-SPA560126 - durability, reliability and user benefits
By choosing a 3.5 mm starter cable OO-SPA560126, you are investing in a product that has a direct impact on the comfort and safety of working with combustion equipment. Key benefits:
- High resistance to abrasion and bending - braided cable structure and fiber quality reduce the risk of abrasion on the guides and edges of the housing.
- Stable 3.5 mm diameter - Compatible with many starter mechanisms, ensures smooth winding and secure grip on the drum.
- Length 100 m - one reel allows you to repeatedly replace the line in different devices, which is economical and convenient.
- Universal application - ideal for garden, construction and municipal equipment of various brands.
By using a strong, flexible cable, you reduce the risk of sudden breakage during startup, which could lead to downtime, additional costs or even injury. Regular replacement of the worn cable with a new one improves the comfort of engine firing and extends the life of the entire starter mechanism.
Technical data - Starter cable 3.5 mm 100 m OO-SPA560126
- Product type: starter cord / starter cord for combustion equipment
- Wire diameter: 3.5 mm
- Total roll length: 100 m
- Structure: braided line
- Purpose: manual starters for lawnmowers, chainsaws, lawnmowers, generators and other combustion machines
- Product code: OO-SPA560126
- EAN code: 5903383007688
The juxtaposition of these parameters shows that it is a versatile and practical starter cable, suitable for both domestic and professional applications. The 100m roll is ideal for service shops and companies that work with a lot of combustion equipment on a daily basis and need a constant supply of consumable parts.
Why choose a 3.5 mm starter cable OO-SPA560126 for your equipment?
When you choose this starter cable, you are betting on a combination of quality, durability and economy. By replacing an old, frayed or repeatedly knotted line with a new one, you gain:
- easier engine firing - smooth sliding of the cable in the guides and on the drum,
- less risk of sudden failure at a crucial point in the work,
- saving time and money - Replacing the cable yourself is quick and requires no complicated tools,
- high level of security - Strong, undamaged cable minimizes the risk of breaking when jerked.
It's the ideal choice for both professionals and home users who want to make sure their equipment fires up whenever it's needed - without any fuss or downtime.
FAQ - Frequently asked questions about 3.5 mm starter cable OO-SPA560126
Question 1: Will the 3.5 mm starter cable OO-SPA560126 fit my mower?
Answer: The 3.5mm diameter is commonly used in many models of lawnmowers, chainsaws and brushcutters. To be absolutely sure, it is a good idea to compare the diameter of the old cable or check the recommendations of the device manufacturer. In most popular designs, the 3.5mm cable is fully compatible.
Question 2: What length of line should I cut from a 100m roll?
Answer: The length depends on the specific model of the device. The easiest way is to measure the old line before discarding it and add 5-10 cm of provision for a comfortable fit in the drum and handle. If the old line is no longer there, you can use the instructions of the device or by trial method to select the length - usually it is in the range of tens to about 150 cm.
Question 3: Do you need special tools to install the starter cable?
Answer: Mostly basic tools will suffice: a screwdriver to remove the starter housing, a knife or sharp scissors to trim the cable, and possibly pliers to tighten the knots or lugs securely. The assembly itself is simple and can be done by yourself.
Question 4: How to take care of the starter cable so that it serves as long as possible?
Answer: Avoid excessive jerking and banging the handle against the starter housing. Regularly check the condition of the cable at the exit of the housing - if abrasions or frayed fibers appear, it is worth replacing it in advance. Store the device in a dry place to reduce the effect of moisture on the starter mechanism.
Question 5: From one roll of 100 m, can I replace the line in several devices?
Answer: Yes, this is one of the biggest advantages of this product. From a roll of 100 meters, you can cut off the sections needed for many devices - depending on the length of a single line, this is usually enough for a dozen or even dozens of full replacements, making the purchase very economical.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.