DUST COVER FOR SW110 OO-OTHMK110SG
- Professional dust cover OO-OTHMK110SG for SW110 sweeper, working width 110 cm. Effectively reduces dust, dust and splashes, improves working comfort and cleanliness in halls, warehouses and parking lots. Ideal for intensive use.
Dust shield for SW110 sweeper OO-OTHMK110SG - professional protection against dust, dirt and splashing
DUST COVER FOR SW110 OO-OTHMK110SG is a high-quality piece of sweeper equipment, the main task of which is to effectively protect the operator and the environment from flying dust, fine dust and splashes of dirt during operation. With a working width of 110 cm, it is the ideal complement to the professional sweeper SW110, enhancing comfort and safety in both commercial, industrial and municipal applications.
Working width 110 cm
Designed exclusively for use with the SW110 sweeper; as a dust, dust or splash guard.
SG-110-01-01
Model OO-OTHMK110SG was designed specifically to work with the SW110 sweeper, which guarantees a perfect fit, stable installation and maximum performance. This is a solution that allows you to maintain a significantly higher level of air cleanliness in the workplace, reducing the spread of dust throughout the hall, warehouse or outdoor area.
What is the dust cover for SW110 OO-OTHMK110SG and how it works?
Dust cover OO-OTHMK110SG is a special protection panel with a working width of 110 cm, attached to the sweeper SW110. Its primary task is to create a barrier between the working brushes and the surroundings so as to minimize air turbulence and the emission of dust, fine particles of dust, sand and small stones.
The design of the cover has been contoured in such a way that:
- direct the debris toward the brush and backfill,
- reduce the floating of light fractions in the air,
- reduce splashes of mud, water and other wet debris.
In practice, this means greater operator comfort, less dirt carried further around the facility, and less risk of secondary dust deposition on already cleaned surfaces.
Where the dust cover OO-OTHMK110SG is mounted and what equipment it fits into?
Dust cover OO-OTHMK110SG is intended exclusively for installation in a sweeper SW110. As a result, the manufacturer was able to perfectly match the shape, width and mounting method to the specific model of the device, which translates into:
- stable seating - The guard remains in the correct position even during intensive work, maneuvering or changes in direction,
- no collisions with working elements - protects, but does not reduce the effectiveness of sweeping,
- easy disassembly and service - if necessary, the cover can be quickly detached.
It is mounted directly at the working unit of the sweeper, in the place provided by the manufacturer by design. Proper attachment guarantees full dust protection and safety at work.
Application of the dust cover for SW110 OO-OTHMK110SG - where it will work best?
The dust cover with a width of 110 cm is particularly recommended for places where excessive dust is a real problem - both for people, machinery and stored goods. It makes the work of the SW110 sweeper much more "clean" and comfortable.
Typical application areas:
- Warehouses and logistics centers - Reducing the floating of cardboard dust, pallet dust, leftover film or fine debris, which improves working conditions and minimizes dirt settlement on goods.
- Production halls - In the metal, wood, food or automotive industries, where fine waste, dust and material cuttings often accumulate on the floor.
- Outdoor and indoor parking lots - reduction of dust, sand and gravel uplift when sweeping large areas.
- Public facilities - Sports halls, shopping malls, exhibition facilities, where maintaining a high standard of cleanliness affects the comfort of users.
- Communal spaces - Sidewalks, stockyards, the vicinity of market halls where dust and fine debris can be a problem for pedestrians and the environment.
In any of these situations, the OO-OTHMK110SG dust cover reduces dirt spreading, allowing you to repeat cleaning jobs less often and increasing overall cleaning efficiency.
SPRINKLER SHIELD FOR SW110 SWAMMER OO-OTHMK110SG - quality, durability and reliability
Designing the model OO-OTHMK110SG, the focus is on combining a robust design with high operating culture. Properly selected materials provide resistance to mechanical damage and external factors such as moisture, small stones or chemicals used for cleaning and maintenance of floors.
Key quality advantages:
- Stable construction - shield retains its shape even under long-term, intensive use.
- Abrasion resistance - contact with dust, sand and small stones does not cause rapid degradation of the working surface.
- Precision fit for SW110 - No need for alterations or fitting, which saves time and eliminates the risk of incorrect installation.
As a result, the shield will be suitable for both everyday work in small companies and large industrial facilities, where cleaning equipment works almost continuously.
User benefits - why choose the OO-OTHMK110SG shield for SW110?
When you invest in a dust cover for your SW110 sweeper, you not only gain an additional piece of equipment, but more importantly, you gain real benefits that are felt during your daily operation.
- Better working conditions for the operator - reducing the amount of dust in the air affects breathing comfort and visibility during cleaning. This is especially important in enclosed spaces such as warehouse or production halls.
- Higher standard of cleanliness - less floating dust means the cleaned surface stays clean for longer, and dirt doesn't settle as intensely on machines, racks or goods.
- Lower maintenance costs of the facility - reduction of secondary soiling translates into less frequent need for repeated cleaning and less wear and tear on filters, vacuum cleaners or other air cleaning aids.
In everyday applications - such as the morning cleaning of shipping halls, cyclical cleaning of the parking lot at a shopping mall, or quick cleanup of a storage yard - the dust cover significantly improves the work culture and perceived cleaning effect.
Technical specifications of the dust shield for SW110 OO-OTHMK110SG
- Model: OO-OTHMK110SG
- Purpose: dust/dust/splash guard
- Compatibility: exclusively with the SW110 sweeper
- Working width: 110 cm
- Symbol: SG-110-01-01
- Main Function: protection against dust, dirt, fine debris and splashes
Such selected parameters make the shield ideal for medium and large areas, where the working width of 110 cm allows you to quickly carry out cleaning work without having to repeatedly drive on the same track.
Practical application examples - how the OO-OTHMK110SG guard improves the operation of the SW110 sweeper?
The use of the dust cover in combination with the SW110 sweeper has a direct impact on the efficiency and ergonomics of the operation. Here are some practical scenarios in which this accessory proves particularly useful:
- Daily cleaning of the warehouse hall - The operator drives between racks, collecting dust from cartons, foils and pallets. Thanks to the cover, dust does not fly high, does not settle back on the goods, and the cleaning results are more durable.
- Cleaning up the outdoor parking lot after winter - When collecting sand and small pebbles after the winter, the cover significantly reduces splashing and floating dust, which is important especially near residential or office buildings.
- Cleaning the production hall after the shift - after a day's work cycle, filings, dust and other small waste remain on the floor. The guard helps concentrate debris in the sweeper's work zone, making cleaning faster and easier.
In each of these examples, the dust cover for SW110 not only improves comfort and aesthetics, but also has a positive impact on the durability of equipment and the overall organization of work in the facility.
FAQ - Frequently Asked Questions about the SW110 OO-OTHMK110SG SPEAKER PROTECTOR
Question 1: Can the OO-OTHMK110SG guard be used with other sweepers than the SW110?
Not. The cover has been specially designed to work with the sweeper SW110 and should only be used with this model. Only then are you assured of full compatibility, stable mounting and effective protection from dust.
Question 2: What is the working width of the dust cover?
The working width of the shield is 110 cm. As a result, it perfectly covers the entire working belt of the SW110 sweeper, ensuring effective dust and splash reduction across the entire working width of the machine.
Question 3: What exactly is the dust cover at the sweeper used for??
The main task of the shield is protection against dust, dirt and splashes dirt during sweeping. It creates a barrier to air turbulence, so that fine dirt fractions do not spread throughout the hall or yard, but remain within the range of the brushes and collection system.
Question 4: Is it complicated to install the cover?
Dust cover OO-OTHMK110SG is designed for quick and intuitive installation in the locations provided by the manufacturer of the SW110 sweeper. Once the mounting components are correctly aligned, attaching the guard is simple and requires no specialized tools beyond those normally used in the maintenance of the unit.
Question 5: Does the use of a shield affect the effectiveness of sweeping?
Yes - positively. The cover does not restrict the work of the brushes, but aids the cleaning process by directing debris into the work zone and limiting its spread. As a result, the surface after the sweeper passes is cleaner, and the need to clean the same place again is less frequent.
Question 6: Under what conditions is it especially worth using a dust cover?
The shield will prove useful wherever there is high dustiness or where a high standard of cleanliness is important: in warehouses, production halls, underground garages, parking lots, storage yards and public facilities. It is especially recommended for cleaning dry, dusty surfaces.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.