AERATION KIT FOR SW110 OO-OTHMK110RA
- Professional AERATION KIT FOR SW110 OO-OTHMK110RA - aeration roller for lawn aeration, moss and dry turf removal. Compatible with SW110 sweeper only. Ideal for gardens, businesses and recreational areas.
AERATION KIT FOR SW110 OO-OTHMK110RA - professional lawn aeration and dry turf removal
AERATION KIT FOR SW110 OO-OTHMK110RA is a specialized lawn aeration roller designed as an accessory for the SW110 sweeper. This sturdy, rotating roller with densely spaced spring tines allows for effective aeration of the turf and partial uprooting of dry, dead grass and moss, resulting in a denser, healthier lawn that is more resistant to dryness.
The aeration roller is interchangeable with the sweeper, which means it easily mounts in place of a standard sweeping shaft. Transform your SW110 sweeper into a powerful garden aerator in minutes, without having to invest in a separate unit. It is a cost-effective, convenient and professional solution for both private users and green care companies.
Manufacturer's description:
Aeration roller; interchangeable with sweeper. Allows partial uprooting of dry turf, but primarily intended for aeration, i.e. aeration of the lawn. Designed exclusively for use with the SW110 sweeper. RA01-00-000.
AERATION KIT FOR SW110 OO-OTHMK110RA - construction, operation and installation on the SW110 sweeper
What is the AERATION KIT for SW110 OO-OTHMK110RA? This is a complete, rotating shaft with guide wheels and densely spaced wire/aeration teeth that installs in place of the standard work shaft on the SW110 sweeper. When the machine is started, the roller rotates and the sharp spring-loaded wires gently penetrate the turf, loosen the soil and brush the dry grass debris out of it.
Where the aeration kit is installed? The kit is designed exclusively for use with the SW110 sweeper. It is mounted on the factory mounts and working bearings of this sweeper, in place of the sweeping shaft. This maintains full compatibility with the drive and working height adjustment of the machine. The user uses the same frame, drive and guide handle, only the work attachments change.
Application in practice: During operation, the shaft:
- aerates the lawn - makes tiny cuts and punctures in the topsoil, allowing air, water and nutrients to flow to the roots,
- comb out dry turf - Gently pulls out dead grass blades, moss and felt accumulating on the soil surface,
- prepares the ground for reseeding, fertilizing and regeneration - loosened and punctured soil better accepts fertilizer and seeds.
Key benefits of the SW110 aeration roller OO-OTHMK110RA - a healthy, dense and resilient lawn all season long
Regular aeration is one of the key maintenance procedures that determine the condition of the lawn. AERATION KIT FOR SW110 OO-OTHMK110RA provides a range of benefits, felt after just a few uses:
- Intensive aeration of the turf - Punctures in the soil improve air circulation, stimulate the root system to grow and increase the lawn's resistance to fungal diseases. As a result, the grass grows denser and the color becomes intensely green.
- Moss and felt removal - resilient wires effectively comb out dead stalks, moss and organic debris, which form an impermeable layer that blocks the flow of water and air. After a few passes, the lawn becomes clean and the roots can breathe freely.
- Better absorption of water and fertilizers - punctured and loosened soil accepts rainwater and irrigation much better, reducing puddles and surface runoff. Mineral fertilizers and lawn regeneration agents are transported faster and more efficiently deep into the soil profile.
In practice, this means less watering, more even grass growth, and reduced problems of yellowing or "bald patches" on the lawn. Home garden owners will primarily notice aesthetically pleasing, lusciously green turf, while landscaping companies will notice shorter service times and better results with customers.
Professional use of AERATION KIT FOR SW110 OO-OTHMK110RA in private gardens and commercial areas
Application of the aeration kit is very wide wherever neat, even and dense grass is required. The set will work great:
- In home gardens - for periodic lawn regeneration after winter, intensive barbecue season or children's and pets' playtime.
- In the areas of housing estates and communities - to maintain the representative appearance of greenery between buildings, at parking lots or playgrounds.
- On company grounds - Around office buildings, production halls or service facilities, where a well-kept lawn builds a professional image of the company.
- In recreational areas - Backyard pitches, campgrounds, resorts where the turf is heavily used and requires frequent regeneration.
In either case, the aeration kit significantly reduces the labor required to keep the lawn in high shape. Instead of a manual scarifier or combustion aerator, the user uses the SW110 sweeper he already owns, installing only another work shaft.
Quality, durability and reliability - why you should choose just the SW110 aeration roller OO-OTHMK110RA?
Designing AERATION KIT FOR SW110 OO-OTHMK110RA the focus is on durability and reliability under heavy use:
- Robust shaft design - the central support element and the crossbars are made of durable materials (metal/composite structure), which carry the loads generated during operation on hard and uneven lawns.
- Resilient aeration tines - densely spaced, thin working wires are flexible, so they better adapt to the surface of the terrain and do not break when coming into contact with small stones or branch debris. This ensures a long service life and an even aeration effect across the entire working width.
- Guide wheels with mounts - sturdy wheels on both sides of the shaft make it easier to guide the set, maintain a constant working depth and reduce the risk of the tines digging too aggressively into the ground. As a result, the lawn is not damaged, and the aeration procedure is repeatable and safe.
For the user, this means the possibility of many years of intensive work without the need for frequent replacement of working elements. This is especially important for service companies that perform aeration on multiple sites during the season - stable and durable attachments mean lower operating costs and less service downtime.
Easy operation and servicing of the OO-OTHMK110RA aeration roller included with the SW110 sweeper
One of the biggest advantages of this set is intuitive operation and simple servicing, which both private users and professionals will appreciate:
- Quick assembly and disassembly - The roller mounts on the same brackets as a standard sweeping roller. The entire operation can take just a few minutes, allowing you to quickly switch the machine from sweeping to aerating mode and vice versa.
- Easy cleaning - after finishing work, the roller can be cleaned of grass and moss residue with a brush or water jet. The simple design makes it easy to access all the components, so keeping the set clean is quick and convenient.
- Possibility of periodic inspection - the user can regularly check the condition of teeth, axles and mounts. If necessary, the replacement of individual components is quick, which extends the life of the entire set.
In practice, this allows for frequent and regular aeration - a small amount of time spent on preparing the equipment translates into significantly better lawn condition throughout the season.
Key features and parameters of the aeration kit - OO-OTHMK110RA
- Symbol / Product Code: OO-OTHMK110RA
- Part number: RA01-00-000
- Type of accessory: roller for aerating (aerating) the lawn
- Compatibility: sW110 sweeper only
- Features: lawn aeration, partial uprooting of dry turf, combing out felt and moss
- Mounting method: installation in place of the standard sweeping shaft, on factory SW110 brackets
- Purpose: home gardens, corporate areas, urban greenery, housing estates, recreational areas
Thanks to the combination of robust construction, full compatibility with the SW110 sweeper and specialized turf aeration function, the OO-OTHMK110RA aeration kit is the ideal equipment addition for those who want to achieve a lawn with a quality similar to professional sports turf.
FAQ - Frequently asked questions about AERATION KIT for SW110 OO-OTHMK110RA
Question 1: To which machine does this aeration kit fit?
Answer: AERATION KIT FOR SW110 OO-OTHMK110RA is designed to work with SW110 sweeper only. It is installed in place of the standard sweeping shaft, using the factory mounts and drive of this machine.
Question 2: How often should the lawn be aerated with this roller?
Answer: At home it is recommended to perform aeration at least 1-2 times a year - usually in spring and autumn. On intensively used lawns (sports fields, recreational areas) the treatment can be repeated more often, observing the condition of the turf.
Question 3: Can the aeration roller be used on any type of lawn?
Answer: Yes, the kit is suitable for use on most home and commercial lawns. However, it is necessary to adjust the depth of work according to the type and condition of the ground - on very young or weakened lawns a milder aeration is recommended.
Question 4: Can using a roller damage the lawn??
Answer: Correctly set working depth and the right rate of passage make the aeration treatment safe for the lawn. Short-term "fraying" of the soil surface is natural - within a few days the grass regenerates, and after a few weeks there is a marked improvement in density and color.
Question 5: Do you need special skills to operate the roller?
Answer: No. If the user can operate the SW110 sweeper, operation of the aeration kit will be just as easy. Simply install the roller according to the instructions, set the appropriate working height and run the machine evenly over the lawn surface.
Question 6: Does the aeration kit require special maintenance?
Answer: After each use, it's a good idea to clean the roller of grass and moss residue and inspect the condition of the teeth and mounts. Periodic lubrication of rotating components according to the manufacturer's recommendations will extend the life of the attachment and ensure trouble-free operation.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.