B&S FUEL FIT ADDITIVE 250 ML OO-ACC992381
- Briggs & Stratton Fuel Fit fuel additive 250 ml OO-ACC992381 - professional gasoline stabilizer for 2T and 4T engines. Protects the carburetor, facilitates starting, prevents corrosion and fuel aging for up to 24 months. Ideal for mowers, tractors, power
Briggs & Stratton Fuel Fit fuel conditioner
extends the life of gasoline for up to 24 months
prevents fuel delamination
facilitates engine starting
helps clean the combustion chamber and carburetor
creates additional protective film in combustion chamber, prevents corrosion
capacity 250 ml - enough for 25 L of fuel
Briggs & Stratton's Fuel Fit solution keeps fuel fresh and protects engines better than ever before.
What is Briggs & Stratton Fuel Fit 250 ml fuel additive OO-ACC992381?
B&S Fuel Fit 250 ml fuel additive OO-ACC992381 is a premium gasoline refiner specially developed by Briggs & Stratton - one of the leaders in the manufacture of internal combustion engines for garden and municipal equipment. The product stabilizes the fuel, protects fuel system components and the combustion chamber, while improving the performance of the engine. Thanks to the advanced Fuel Fit formula, the gasoline retains its properties for up to 24 months, which is especially important in machines used seasonally.
The product comes in a practical 250 ml bottle, which is enough to prepare as much as 25 liters of fuel. The use of a convenient measuring cup allows precise dosage of the enhancer, so that the user can maintain optimal proportions without the need for additional measuring dishes.
B&S Fuel Fit fuel additive is the ideal choice for people who want to extend the life of their lawnmowers, garden tractors, soilers, snowblowers, generators and other gasoline-powered internal combustion equipment, and at the same time value trouble-free start-up after a long shutdown.
Where and how to use B&S Fuel Fit 250 ml Briggs & Stratton fuel additive?
B&S Fuel Fit additive is used directly in the fuel tank of internal combustion equipment with gasoline engines. This is not a mechanically assembled component - it is a liquid that must be properly mixed with gasoline. Use consists of adding the recommended amount of preparation to fresh fuel, and then pouring such prepared mixture into the machine tank.
Typical application sites for the Fuel Fit additive:
- lawn mowers and garden tractors,
- soilers, scarifiers, aerators,
- snowblowers with gasoline engines,
- generators used on an emergency or occasional basis,
- water pumps, compactors and other construction machinery,
- other equipment with small 2T and 4T gasoline engines, where reliability of starting is crucial.
For maximum protective effect, it is recommended to always add Fuel Fit to fresh gasoline, and then store it in the canister or tank of the device. This ensures that the fuel does not delaminate, does not age prematurely and does not cause problems with starting the engine after a long shutdown, such as after winter.
Examples of daily use:
- Before the lawn mowing season is over, you add Fuel Fit to the fuel, refuel the mower and put it in the garage. In the spring, the engine starts without any unnecessary spinning or cleaning of the carburetor.
- You have a generator in case of power failure - thanks to Fuel Fit, the fuel in the canister remains fresh for up to 2 years, so in case of need the device starts immediately.
- You use the snowblower only a few times a year - the fuel additive used protects the carburetor and combustion chamber from deposits and corrosion, reducing the need for costly inspections.
Application and key benefits of Fuel Fit 250 ml fuel additive OO-ACC992381
Briggs & Stratton Fuel Fit fuel additive is designed to solve the most common problems of gasoline engine users: difficulty starting after a stop, dirty carburetors, unstable engine operation and accelerated fuel degradation. Its regular use ensures long-term protection of both fuel and engine components.
Key benefits of using Fuel Fit:
- Extended gasoline shelf life of up to 24 months - Fuel stabilizer prevents oxidation and aging processes of gasoline, so it retains its properties much longer than without the additive.
- Protection against fuel delamination - the preparation prevents the separation of fuel fractions and the formation of deposits that could block carburetor nozzles or clog the fuel filter.
- Facilitated engine starting - cleaner fuel and a stable mixture promote easy firing, even after many months of machine downtime.
- Cleaning the combustion chamber and carburetor - detergent additives help remove carbon build-up and contaminants, which improves engine culture and reduces fuel consumption.
- Corrosion protection - Fuel Fit forms a thin protective film on metal components in the combustion chamber and fuel system, reducing the risk of corrosion caused by moisture and biocomponents in the fuel.
Daily use scenarios:
- As you prepare your fuel for the spring season - add Fuel Fit to your gasoline, fuel all your garden equipment, and rest assured that each will start when you need it.
- When you store a gasoline canister in the garage for many months - thanks to the stabilizer, you do not have to pour out the old fuel or mix it with the new one, as it retains its performance parameters.
- In a gardening or construction company - the use of Fuel Fit across a fleet of equipment reduces fuel system-related failures and service costs.
Why choose Briggs & Stratton Fuel Fit 250 ml original fuel enhancer?
The original Briggs & Stratton Fuel Fit 250 ml fuel additive OO-ACC992381 was developed by the engine manufacturer, which is well aware of their requirements and operating characteristics. This makes the formulation ideally suited for small gasoline engines used in garden, municipal and construction equipment.
Three key reasons why customers choose Fuel Fit:
- Quality and reliability proven by the Briggs & Stratton brand - by using the original product of the engine manufacturer, you are assured that the additive is compatible with the materials used and the design of the carburetor, hoses and seals.
- Saving time and money - fewer breakdowns, easier firing and reduced carburetor cleaning translate directly into lower service costs and longer equipment life.
- Fuel storage safety - the possibility of storing gasoline for up to 24 months without any loss of parameters reduces "waste" fuel consumption and the risk of operational problems caused by old fuel.
In practice, this means that a single purchase of a 250 ml bottle is an investment that protects as much as 25 liters of gasoline. Compared to the cost of repairing or replacing a carburetor, or starting problems at a critical time, using Fuel Fit is an extremely cost-effective solution.
Technical specifications of B&S Fuel Fit 250 ml fuel additive OO-ACC992381
- Manufacturer: Briggs & Stratton
- Model/code: Fuel Fit OO-ACC992381
- Product type: gasoline refiner / stabilizer for gasoline engines
- Package Capacity: 250 ml
- Performance: 250 ml is enough to prepare approx. 25 liters of fuel
- Application: small 2-stroke and 4-stroke gasoline engines (lawnmowers, tractors, snowblowers, generators, pumps, soilers, etc.).)
- Action: stabilize fuel, protect against corrosion, clean combustion chamber and carburetor, facilitate startup
- Fuel protection period: up to 24 months (when used properly)
- Character: gasoline mixing fluid
- Dosage method: measuring a portion of the preparation and adding to the fuel (recommended use according to the manufacturer's ratio)
- EAN code: 5907629204008
How to properly use Briggs & Stratton Fuel Fit fuel additive in daily operations?
The use of Fuel Fit additive is very simple and does not require specialized knowledge. The key is to keep the right proportions and add the product to fresh gasoline.
General Directions for Use:
- Prepare a clean canister or fuel tank.
- Measure the appropriate amount of Fuel Fit 250 ml additive depending on the volume of gasoline (a 250 ml bottle is enough for approx. 25 liters of fuel - use the dosage recommended by the manufacturer).
- Pour the measured amount of preparation into the canister.
- Add the required amount of fresh gasoline.
- Gently shake the canister to mix the fuel well with the additive.
- Pour the finished mixture into the unit's tank or store in a canister for later use.
Practical examples:
- Before prolonged storage (e.g. winter), refuel the device with Fuel Fit, start the engine for a few minutes so that the product reaches the carburetor and the entire fuel system.
- If you frequently use several machines, you can prepare a larger amount of fuel in a canister with Fuel Fit and refill your equipment with it on a regular basis, confident that the fuel will not get old.
- For equipment used periodically (such as a generator), always use fuel with an additive - you will minimize the risk that at a critical moment the device will not start due to old gasoline.
Frequently asked questions (FAQs) - B&S Fuel Fit 250 ml fuel additive OO-ACC992381
1. For which engines I can use Fuel Fit fuel additive?
The product is designed for small 2-stroke and 4-stroke gasoline engines, used m.in. in lawnmowers, garden tractors, snowblowers, generators, soilers, water pumps and other devices equipped with a carburetor.
2. Is Fuel Fit suitable for two-stroke engines with an oil-fuel mixture?
Yes, the product can also be used on 2T engines. The additive is poured into gasoline before mixing it with oil or into the already prepared mixture, maintaining the proportions of fuel and oil recommended by the manufacturer.
3. How long does fuel with Fuel Fit retain its properties?
When the product is used properly and the fuel is stored in a sealed canister or tank, the gasoline can retain its properties for up to 24 months.
4. Is it safe for the engine to use the fuel additive?
Yes. Fuel Fit was developed by Briggs & Stratton specifically for small gasoline engines. The product protects the fuel system, cleans the carburetor and combustion chamber, and protects the components from corrosion. Used as directed, it is completely safe.
5. Do I have to use the additive every time I refuel?
For best protection and stabilization results, it is recommended to use Fuel Fit whenever you prepare fuel for equipment used seasonally or occasionally. For heavy daily use of the machine, it is also a good idea to use an additive to reduce the formation of sludge and carbon deposits.
6. What happens if I accidentally add too much preparation?
Slightly exceeding the recommended dosage should not harm the engine, but for optimal results and economical use, it is worth sticking to the proportions recommended by the manufacturer. Too much additive will not bring additional benefits, but only increase the cost of fuel preparation.
7. Is Fuel Fit suitable for fuel with biocomponents (E5, E10)?
Yes, the stabilizer was developed for modern gasoline fuels containing biocomponents that are more prone to aging and moisture absorption. Fuel Fit helps reduce the negative effects of these phenomena.
8. How to store a bottle of fuel additive?
Store the product in the original, tightly closed packaging, in a dry and cool place, away from sources of fire and out of the reach of children. After each use, the cap should be screwed on tightly.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.