EMAK K2200 SERIES 2 ENGINE AIR FILTER L66151298
- Original EMAK K2200 Series 2 engine air filter L66151298 for Oleo-Mac tractors (OM 105/24 KH, OM 106/24 KH, OM 107L/24 KH, OM 124/24 KH, Apache 92 Evo). Effective filtration, engine protection, full power and lower fuel consumption. Ideal for working in b
Emak K2200 engine air filter - what is this product and why is it so important?
EMAK K2200 Series 2 Engine Air Filter L66151298 is an original consumable item designed for modern garden tractors equipped with Emak K2200 Series engines. Its primary task is to effectively filter the air sucked into the combustion chamber so that only a clean mixture free of dust, sand, pollen and other contaminants typical of gardening or landscaping work enters the engine.
Thanks to the use of high-quality filter materials and tailored design, this filter significantly extends the life of the engine, improves its operating culture and reduces the risk of costly failures. This is a key element for any tractor user who expects reliability, stable power and low fuel consumption throughout the mowing season.
Where the EMAK K2200 Series 2 air filter L66151298 is installed?
EMAK K2200 Series 2 air filter L66151298 is mounted directly in the air filter housing of the Emak K2200 engine. Replacement involves opening the housing (usually using clamps, screws or snaps), removing the old cartridge and inserting the new filter along with the pre-filter in the proper orientation. The design has been developed so that the replacement can be carried out by the tractor user himself - without specialized tools and without the need to visit a service center.
The filter fits perfectly into the slot in the filter chamber, ensuring tight connections and eliminating the risk of contaminated air bypassing the filter element. Proper seating of the filter ensures stable airflow and optimal combustion conditions of the fuel-air mixture in the engine.
Application of EMAK K2200 Series 2 air filter - compatibility and practical benefits
The presented filter is designed for Emak K2200 engines used in selected models of garden tractors and riders, especially in machines used intensively on large green areas. The product provides effective protection for the drive unit from dust that is generated when mowing dry lawns, weeds and working on unpaved surfaces.
Regular use of the original EMAK K2200 Series 2 air filter translates into:
- extend engine life and save on service costs,
- maintaining the full working power of the tractor, even during prolonged mowing,
- reduced fuel consumption due to a properly selected air mixture,
- cleaner and more stable engine operation without jerking and speed drops.
Air filter with pre-filter for Oleo-Mac tractor - original fit and reliable operation
Air filter with pre-filter Oleo-Mac tractor OM 105/24 KH / OM 106/24 KH / OM 107L/24 KH / OM 124/24 KH / Apache 92 Evo
For Emak engines:
K2200
From the yearbook of 05.2017.
Air filter EMAK K2200 Series 2 L66151298 is fully compatible with the above models of Oleo-Mac tractors, which guarantees an exact dimensional fit and full compatibility with the filter housing. Thanks to the built-in pre-filter, it effectively catches larger dirt particles at the initial stage, relieving the burden on the main filter cartridge. Such a solution extends the period between filter changes, which is extremely beneficial for users who frequently operate their machines.
In practice, this means that you can confidently use your Oleo-Mac tractor for intensive mowing of large gardens, orchards, backyard areas or recreational plots - even in dry and dusty conditions. The filter will make sure that clean air enters the engine, and you will be able to concentrate on efficient work.
Durable design and high quality materials of EMAK K2200 Series 2 filter L66151298
The filter is made of deformation-resistant and oil- and fuel-resistant materials that do not wear out quickly even with regular cleaning. The outer foam layer acts as an efficient pre-filter, trapping coarser particles and protecting the actual filter medium inside the cartridge.
Robust framing ensures structural rigidity and precise adhesion to housing components. This design eliminates the risk of leaks through which dust particles could enter directly into the engine cylinder. With this filter you can significantly reduce the risk of scratching the cylinder face, premature wear of piston rings or contamination of engine oil.
In the daily use of the tractor, this translates into longer service intervals, less frequent oil changes and efficient engine starting even after a long break in operation. It's an investment that will pay off in the form of lower machine operating costs.
Easy replacement, simple maintenance and convenience of use
EMAK K2200 Series 2 air filter is designed for users who want to take care of their equipment themselves. Replacement of the cartridge is quick and intuitive - it only takes a few minutes to restore full efficiency of the intake system. So you can easily check the condition of the filter before the season starts, after intensive mowing or after working in extremely dusty conditions.
Regular inspection and replacement of the air filter is:
- easier engine starting,
- stable rotation while mowing,
- lower exhaust emissions due to the correct combustion process,
- lower operating costs in the long run.
In practice, this means that your tractor will be ready to work whenever you need it - without unexpected power drops and the need for frequent service visits.
Practical application - when it's a good idea to change the air filter in an Oleo-Mac tractor?
The air filter EMAK K2200 Series 2 L66151298 should be inspected regularly according to the recommendations of the machine manufacturer. This is especially important after intensive mowing in difficult conditions:
- mowing dry, tall grass in large areas,
- working in sandy areas or along dirt roads,
- mowing weeds and bushes that create a large amount of dust and seeds,
- frequent use of the tractor during the full growing season.
If you notice a drop in power, rough engine running, starting problems or increased smoke from the exhaust, one of the first items to check is actually the air filter. Replacing a worn-out cartridge with a new one is often the fastest and most effective way to get your tractor back to full working order.
The most important benefits for the user of the EMAK K2200 Series 2 filter L66151298
- Engine protection - effective air filtration minimizes the risk of mechanical damage caused by dust and dirt.
- Higher productivity - A clean filter means full engine power, faster mowing and a better quality lawn cut.
- Lower operating costs - Lower fuel consumption, less frequent repairs and longer engine life.
- Easy to use - quick replacement without specialized tools, can be done by yourself.
- Original fit - The filter is dedicated to specific models of tractors and engines, which eliminates compatibility problems.
Technical data and product identification EMAK K2200 SERIES 2 ENGINE AIR FILTER
- Purpose: air filters for engines of garden tractors Emak K2200
- Type: air filter with pre-filter (foam cartridge + filter element)
- Compatibility: oleo-Mac OM 105/24 KH, OM 106/24 KH, OM 107L/24 KH, OM 124/24 KH, Apache 92 Evo tractors
- Engine: Emak K2200 (as of 05.2017 vintage.)
- Product code / external system code: L66151298
- Color: black (casing and foam)
- Application: protection of the intake system and combustion chamber of garden tractor engines
FAQ - Frequently asked questions about EMAK K2200 Series 2 air filter L66151298
1. How often should you change the air filter in a tractor with an Emak K2200 engine??
Frequency of replacement depends on the intensity of use and operating conditions. For typical garden use, it is recommended to check the filter every dozen or so hours of operation and replace it at least once a season. In very dusty conditions, the filter may need to be replaced more often.
2. How do I know if a filter is worn out and needs to be replaced?
Wear and tear of the filter is evidenced by visible dirt, dark coloring of the foam, clogged pores of the filter material, as well as symptoms such as a decrease in engine power, difficulty in starting or uneven operation at speed. If in doubt, it's definitely worth replacing the filter with a new one - it's an inexpensive component, and it has a huge impact on the condition of the engine.
3. Can I clean this filter instead of replacing it?
A short-term solution may be to gently clean the foam prefilter according to the machine manufacturer's recommendations, but only a new, unworn filter cartridge provides fully effective protection. Regular replacement is safest for the engine and recommended for heavy use of the tractor.
4. Will the EMAK K2200 Series 2 filter L66151298 fit all models of Oleo-Mac tractors??
The filter is dedicated to specific models, m.in. OM 105/24 KH, OM 106/24 KH, OM 107L/24 KH, OM 124/24 KH, and Apache 92 Evo with Emak K2200 engine from 05.2017 vintage. Before you buy, it's a good idea to compare engine markings and tractor manuals.
5. Does changing the air filter affect fuel consumption?
Yes. A clogged filter restricts the air supply to the engine, which results in improper combustion of the air-fuel mixture and can significantly increase fuel consumption. The new EMAK K2200 Series 2 clean filter helps maintain optimum combustion parameters, thereby reducing operating costs.
6. Can I replace the filter myself or is a service needed?
The design of the filter and housing is designed to allow self-replacement by the user. In most cases, basic tools are enough (and often just opening the case clamps). However, it's worth following the tractor's instruction manual.
7. Why choose the original EMAK K2200 filter rather than a replacement?
Original EMAK K2200 Series 2 air filter L66151298 ensures proper fit, adequate air throughput and filtration efficiency. Replacements may have a different material density, different dimensions or inferior workmanship, increasing the risk of inadequate engine protection and earlier failures.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.