EMAK K2200 ENGINE OIL FILTER L66151055
- EMAK K2200 engine oil filter L66151055 is an original screw-on filter for Oleo-Mac garden tractors (OM 105/24 KH, 106/24 KH, 107L/24 KH, 124/24 KH) and Apache 92 Evo. Provides effective oil filtration, engine protection, stable lubricant pressure
Oil filter for EMAK K2200 engine - what it is and why you should choose it?
Oil filter for engine EMAK K2200 L66151055 is a high-quality consumable component designed for effective oil cleaning in four-stroke engines used in garden tractors and riding mowers. Its task is to retain mechanical impurities, metal filings, residual carbon deposits and other particles that are formed during normal operation of the drive unit. As a result, the oil retains its lubricating properties for longer, and the engine runs smoothly, with full power and safer for components.
Changing the oil filter regularly is crucial to the life of the engine - contaminated oil accelerates the wear of piston rings, crankshaft, pan and valve train components. Using a brand-name filter, such as EMAK K2200 L66151055, this minimizes risk and helps maintain a high standard of servicing garden equipment.
Use of EMAK K2200 L66151055 oil filter in Oleo-Mac and Apache tractors
Presented tractor oil filter is dedicated to popular models of Oleo-Mac and Apache brand garden tractors. It has been designed specifically for the requirements of the engines used in these machines, ensuring a perfect fit and trouble-free installation.
EMAK K2200 engine oil filter is designed in particular for:
- Oleo-Mac OM 105/24 KH
- Oleo-Mac OM 106/24 KH
- Oleo-Mac OM 107L/24 KH
- Oleo-Mac OM 124/24 KH
- Apache 92 Evo
Changing the filter on these models keeps the lubrication system fully operational, which translates into reliable operation during:
- mowing extensive home lawns,
- care of recreational areas, playing fields, recreation centers,
- maintenance of green areas around companies, hotels or public facilities.
Thanks to the use of the original type of filter matched to the specific model of the tractor, the user is assured that the thread, the diameter of the seal and the height of the body are perfectly compatible with the design requirements of the engine.
Where to install the oil filter for the EMAK K2200 L66151055 engine?
EMAK K2200 oil filter L66151055 is mounted directly in the lubrication system of the engine, usually on the side or front of the drive unit of a garden tractor. It is screwed to a specially prepared base with a threaded spigot. Thanks to the standard mounting solution, filter replacement is quick and does not require advanced tools - all you need is a filter wrench or a suitable socket wrench.
Typical applications and operational activities include:
- Periodic replacement of engine oil - When draining the old oil and pouring in fresh oil, the new EMAK K2200 filter ensures that the oil will be properly filtered from the first startup after service.
- Preparing the tractor for the season - Spring maintenance before the intensive mowing season is the ideal time to change the filter, avoiding problems when working in high temperatures.
- Post-season service - Changing the filter after the season protects the engine from contaminated oil during extended downtime.
The filter is a "screw-on" type component, which means that removal involves unscrewing it in a counterclockwise motion, and installation of a new one - hand tightening and final tightening with a wrench.
Oleo-Mac / Apache tractor oil filter - design, durability and reliability
Design oil filter for Oleo-Mac and Apache EMAK K2200 tractor has been optimized for trouble-free operation in harsh horticultural conditions - with fluctuating temperatures, dust and frequent engine loading under full power. Steel body with high mechanical strength protects the filter cartridge from damage, and high-quality anti-corrosion coating protects against rust.
The interior of the filter is formed by a specially selected filter material - paper or non-woven fabric with the appropriate gradation, which effectively retains even fine contaminants, while not restricting the flow of oil. Robust rubber gasket ensures full tightness of the connection, eliminating the risk of leakage even during prolonged operation at high temperatures.
Thanks to this design, the filter:
- Protects precision engine components against excessive wear, extending its life.
- Ensures stable oil pressure, which is important when working on inclines, when driving on uneven ground or with sudden load changes.
- Increases equipment reliability, so the tractor is ready to go whenever you need it - whether it's for a quick mowing of a home lawn or all-day maintenance on a larger plot of land.
EMAK K2200 ENGINE OIL FILTER L66151055 - user benefits and daily use
By selecting eMAK K2200 oil filter L66151055, you are not only investing in a single consumable component, but more importantly in the safety and longevity of your garden tractor. Regular, proper oil filtration translates into a number of measurable benefits in daily operations:
- Lower service costs - less wear and tear on engine components means less frequent need for costly repairs or replacement of the entire drive unit.
- Better engine culture - Clean oil promotes quieter, more stable operation, which increases operator comfort during long hours of mowing.
- Easy firing - A well-lubricated engine starts more easily both after a long break and in colder weather.
- Trouble-free operation in harsh environments - under heavy load, high ambient temperature or working in dust and dirt, the EMAK filter helps maintain proper lubrication parameters.
Examples of daily applications include the use of a tractor:
- on large private properties of several thousand square meters,
- in agritourism farms and recreational areas,
- in companies engaged in professional care of green areas,
- on playing fields, golf courses, park and estate areas.
Manufacturer's description - oil filter for EMAK K2200 engine
Oil filter for EMAK K2200 engine
Oleo-Mac OM 105/24 KH / OM 106/24 KH / OM 107L/24 KH / OM 124/24 KH / Apache 92 Evo tractor oil filter
The most important technical and operational features of the EMAK K2200 oil filter
Although the specific parameters may vary depending on the production series, the EMAK K2200 L66151055 oil filter is characterized by the typical design and dimensions of this class of solutions, which are tailored to the engines installed in the above-mentioned models of tractors. Key features include:
- Filter type: screw-on, canned oil filter for four-stroke engine.
- Purpose: oleo-Mac garden tractors (OM 105/24 KH, OM 106/24 KH, OM 107L/24 KH, OM 124/24 KH) and the Apache 92 Evo.
- Body material: black powder-coated steel, resistant to corrosion and mechanical damage.
- Sealing: flexible rubber gasket to ensure tight contact with the filter base.
- Filter cartridge: high-quality filter material with a large working surface.
- Product code / external system code: L66151055.
Thanks to these parameters, the filter performs perfectly in daily operation, ensuring reliable installation and trouble-free operation throughout the service interval recommended by the machine manufacturer.
How often to change the oil filter in a tractor with an EMAK K2200 engine?
The frequency of changing the oil filter depends on the intensity of use of the tractor and the operating conditions. In practice, the following rules are adopted:
- Replacement at every oil inspection - Usually every 25-50 hours of engine operation or once a season, depending on the machine manufacturer's recommendations.
- In harsh working conditions (dust, high temperature, intensive use) - it is worth reducing the replacement interval to ensure maximum protection of the drive unit.
- After buying a used tractor - it is recommended to change the oil and filter preventively, in order to have full control over the operating condition of the machine.
Adherence to these rules allows you to maintain high engine performance for many seasons, and the investment in the EMAK K2200 L66151055 oil filter quickly pays for itself through lower costs of possible repairs.
FAQ - frequently asked questions about EMAK K2200 L66151055 oil filter
Question 1: Does the EMAK K2200 L66151055 oil filter fit other models of tractors than the listed Oleo-Mac and Apache 92 Evo?
Answer: The filter is mainly designed for Oleo-Mac OM 105/24 KH, OM 106/24 KH, OM 107L/24 KH, OM 124/24 KH and Apache 92 Evo models. It can also fit other machines with the same type of engine and threads, but before installing it, always compare the original filter markings, dimensions and specifications of the manufacturer of the machine.
Question 2: How to change the oil filter in a garden tractor yourself?
Answer: First, gently warm up the engine to make the oil thinner, then turn off the machine and protect it from accidental startup. After draining the old oil, unscrew the used filter with a filter wrench, clean the gasket adhesion area, lightly lubricate the gasket of the new EMAK K2200 filter with oil and screw it on by hand, finally gently tightening it with a wrench. After pouring in the new oil, start the engine and check for leaks in the connections.
Question 3: What happens if I do not change the oil filter regularly?
Answer: Neglecting to change the filter results in the accumulation of contaminants in the oil. Over time, this leads to faster wear of engine components, loss of power, difficulty in starting, and even serious failures requiring costly repairs. Regular replacement of the EMAK K2200 L66151055 filter is therefore one of the simplest and cheapest maintenance activities that significantly extend the life of the tractor.
Question 4: Do you need specialized tools to install the EMAK K2200 filter??
Answer: In most cases, all you need is a standard oil filter wrench or a suitable socket wrench to safely unscrew the used filter and tighten the new one. No need for advanced workshop equipment. As a result, most users are able to perform the replacement themselves at home.
Question 5: Is it necessary to additionally bleed the system after changing the oil filter?
Answer: In typical engines used in Oleo-Mac and Apache garden tractors, there is no need for special venting of the lubrication system. After changing the filter and oil, just run the engine for a few tens of seconds, checking for leaks and the oil pressure light (if the model has it). Then it is a good idea to check the oil level again and, if necessary, top up to the value recommended by the manufacturer.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.