ENGINE AIR FILTER EMAK K1600, K1250 MISTRAL L66150786
- EMAK K1600, K1250 MISTRAL engine air filter L66150786 for Oleo-Mac and Mistral tractors. Original cartridge L66150786 guarantees effective filtration, engine protection, stable power and lower combustion.
ENGINE AIR FILTER EMAK K1600, K1250 MISTRAL L66150786 is a high-quality filter cartridge designed for Emak engines used in Oleo-Mac and Mistral garden tractors. It provides effective filtration of impurities from the intake air, protecting the engine from dust, dust and grass particles, which translates into longer machine life, stable power and lower fuel consumption.
Oleo-Mac OM 105/16 KH / OM 106/16 KH / OM 107L/16 KH / OM 92/16 KH / Mistral 72/12.5 KH tractor air filter
EMAK K1600, K1250 MISTRAL ENGINE AIR FILTER L66150786 - what it is and why it is so important?
The air filter is a key component of the intake system of an internal combustion engine. Its task is to stop any fine dirt in the air sucked in by the engine - dust, sand, dust, grass remnants or small organic debris. ENGINE AIR FILTER EMAK K1600, K1250 MISTRAL L66150786 was designed specifically for use in demanding garden conditions, where the amount of airborne contaminants is much higher than in a car, for example.
Thanks to the appropriately selected filter surface and modern design, the filter:
- effectively purifies the air entering the combustion chamber,
- ensures optimal airflow, which contributes to stable engine operation,
- minimizes the risk of damage to the cylinder, piston and rings,
- prolongs the life of the entire drive unit of the tractor.
In practice, this means less risk of costly repairs, easier engine starting, better performance and lower fuel consumption - especially important for regular maintenance of large lawn areas, where the tractor works for many hours.
Where the air filter of the EMAK K1600, K1250 MISTRAL L66150786 is installed?
ENGINE AIR FILTER EMAK K1600, K1250 MISTRAL L66150786 mounts directly in the air filter housing of the engine used in garden tractors. This is a replaceable cartridge that is placed in the factory basket/housing, according to the machine manufacturer's instructions. It fits popular tractor models:
- Oleo-Mac OM 105/16 KH,
- Oleo-Mac OM 106/16 KH,
- Oleo-Mac OM 107L/16 KH,
- Oleo-Mac OM 92/16 KH,
- Mistral 72/12.5 KH.
In practice, the installation of the filter comes down to:
- Unscrewing or unfastening the cover of the air filter housing.
- Removal of the old, used cartridge.
- Clean the inside of the housing from dust and grass residue.
- Insert the new filter in the correct position (according to the guides).
- Close the case and make sure it is airtight.
Thanks to its well-thought-out design, filter replacement is quick and does not require specialized tools - you can do it yourself in your home garage, which reduces the cost of operating the tractor.
The use of air filter EMAK K1600, K1250 MISTRAL L66150786 in the daily operation of the tractor
The air filter is crucial in any internal combustion engine, but especially in gardening machinery that operates in a dusty environment. ENGINE AIR FILTER EMAK K1600, K1250 MISTRAL L66150786 was designed for intensive use in such conditions. Its use will work in many situations:
- Mowing of large home lawns - During regular mowing of the lawn around the house, especially during periods of drought, a lot of dust and fine plant debris floats away. The filter effectively traps these contaminants so that the engine retains full power.
- Maintenance of green areas at companies and public facilities - Garden companies using Oleo-Mac and Mistral tractors will appreciate the reliability of the filter, which allows for hours of work without a drop in performance.
- Work on plots of land, recreational areas and playing fields - during the intensive use of the machine in the season, the right air filter is a guarantee of trouble-free engine starting and steady operation even in more difficult terrain conditions.
The use of a genuine, matched air filter also means that the engine's factory performance is maintained - proper power, torque and optimal combustion of the fuel-air mixture. This has a direct impact on the economy of tractor use and operator comfort.
Key features and benefits of Emak K1600, K1250 Mistral engine air filter L66150786
When designing a product description for your needs, it is worth highlighting features that realistically translate into comfort and safety at work:
- High filtration efficiency - dense, multi-layered filter material and an external reinforcing mesh effectively trap dirt without restricting air flow. This guarantees cleaner combustion and less wear and tear on engine components.
- Exact fit for Emak engines - The filter is designed to work with K1600 and K1250 drive units, so it fits perfectly into the original housing and ensures proper tightness. No leaks means no risk of unfiltered air getting in.
- Rugged construction - strong plastic edges and a metal mesh protecting the filter cartridge protect the filter from deformation and mechanical damage, which is particularly important during frequent replacement or transport of the tractor.
- Easy, do-it-yourself replacement - the user does not need to use the service to replace the filter. Easy access and intuitive installation reduce machine downtime and minimize additional costs.
- Stable engine operation - with regular filter changes, the engine starts more easily, runs evenly at idle and under load, which noticeably improves the comfort of mowing.
For example, the owner of a large property with many plantings of trees and shrubs can mow the grass all season long without worrying about the tractor's power loss. A gardening company, on the other hand, by completing orders on several sites a day, reduces the risk of breakdowns during the work and at the same time maintains a positive image with reliable equipment.
Air filter for Oleo-Mac OM 105/16 KH / 106/16 KH / 107L/16 KH / 92/16 KH / Mistral 72/12.5 KH tractor - parameters and compatibility
ENGINE AIR FILTER EMAK K1600, K1250 MISTRAL L66150786 is dedicated to specific models of tractors, which ensures full compatibility with the intake system and best performance. The purpose of the filter includes:
- tractor Oleo-Mac OM 105/16 KH,
- tractor Oleo-Mac OM 106/16 KH,
- tractor Oleo-Mac OM 107L/16 KH,
- tractor Oleo-Mac OM 92/16 KH,
- tractor Mistral 72/12.5 KH.
Product Symbol: L66150786
Such a fit eliminates the problem of looking for "replacements by eye" and the risk of inaccurate adhesion of the cartridge, which could lead to the intake of unfiltered air. The user is assured that he is choosing a part made for his machine.
In everyday use, this means m.in.:
- easier scheduling of periodic service - you always know what filter to order,
- shorter inspection time - the mechanic or user does not have to "match" parts,
- confidence that the engine's operating parameters remain in accordance with the manufacturer's recommendations.
How often to replace the air filter EMAK K1600, K1250 MISTRAL L66150786?
Frequency of air filter replacement depends on the intensity of tractor use and operating conditions. For standard domestic use, it is recommended:
- checking the condition of the filter every several hours of operation - For example, every 10-15 hours,
- replacement with a new one at least once a season, and in very dusty environments - even more often.
The user can easily assess the need for replacement by observing the degree of dirt on the filter surface. If the filter is badly darkened, clogged with grass residue or dust, it is not worth just "blowing it out" - it is much safer to replace it with a new, inexpensive cartridge, thus protecting the much more expensive engine.
Practical example: a person mowing ok. 3,000-4,000 sq. ft. of lawn every week during the summer season, especially during periods of drought, should expect to have to change the filter more than once per season to keep the tractor at full power and trouble-free.
Why choose Emak K1600, K1250 Mistral air filter L66150786 for your tractor?
Investing in a proper air filter is a small cost compared to the price of the engine or the entire machine, and the benefits are tangible:
- Investment protection - by using a dedicated filter, you take care of the drive unit of the tractor, extend its life and minimize the risk of failure.
- Comfort and safety at work - Stable engine operation means less vibration, less noise and greater operator comfort during long hours of mowing.
- Fuel savings - the right ratio of air to fuel helps reduce combustion, which with regular use of the tractor translates into real savings.
- Easy access to parts - filter marked with the code L66150786 is easy to identify and order, so you can always have a spare cartridge on hand.
FAQ - frequently asked questions about EMAK K1600, K1250 MISTRAL ENGINE AIR FILTER L66150786
Question 1: Will this filter fit my Oleo-Mac tractor?
Yes, if you own a tractor Oleo-Mac OM 105/16 KH, OM 106/16 KH, OM 107L/16 KH, OM 92/16 KH or Mistral 72/12.5 KH, air filter code L66150786 is designed just for your machine.
Question 2: Every how many hours of operation should I change the air filter?
It is recommended to check the filter every 10-15 hours of tractor operation and its replacement at least once a season. In dusty environments or heavy use, it's a good idea to do this more often to give the engine maximum protection.
Question 3: Can I clean and reuse the filter?
It is permissible to gently clean the surface of the filter from loose dirt, but long-term use of a heavily soiled filter is not recommended. For full protection of the engine, it is safer to replace the cartridge with a new one - a small cost compared to the possible repair of the drive unit.
Question 4: Does replacing the filter require a service visit?
Not. Replacing the air filter L66150786 is simple and can be done by yourself. Simply unfasten or unscrew the cover of the filter housing, remove the used cartridge, clean the inside of the housing and insert the new filter, paying attention to its correct orientation.
Question 5: What are the symptoms of a worn or clogged air filter?
The most common symptoms include: harder engine starting, loss of power, engine throttling under load, higher fuel consumption and darker exhaust smoke. If you notice any of these symptoms, it's a good idea to check the condition of the air filter first.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.