COMPLETE EMAK K500-K800 ENGINE AIR FILTER L66150717
- Complete engine air filter EMAK K500-K800 L66150717 - original set (base, prefilter, filter, cover) for maximum engine protection, stable power and lower fuel consumption in mowers and tillers.
What is a complete air filter for Emak K500-K800 engine L66150717?
COMPLETE EMAK K500-K800 ENGINE AIR FILTER L66150717 is an original, complete filter set designed for modern Emak engines used m.in. in soilers, mowers, snowblowers or other garden and municipal machines. The kit includes all the key components responsible for the proper cleaning of the air drawn into the combustion chamber.
Its task is to effectively trap dust, dust, grass, sand and other debris that floats around the engine during machine operation. This allows clean air to enter the cylinder, which increases engine efficiency, reduces fuel consumption and significantly extends the life of the engine. This is a small but key component that directly affects the reliability of your equipment.
Where the Emak K500-K800 L66150717 air filter is installed?
Emak air filter L66150717 is mounted directly on the engine body, in a specially prepared slot of the intake system. The kit forms a complete filter housing with interchangeable components, making installation quick and intuitive even for the amateur user.
The filter is usually located on the side of the engine, under an easily accessible cover. This allows you to conveniently check the condition of the filter and clean or replace it without having to take apart other components. In practice, all you have to do is remove the cover, remove the filter cartridge and pre-filter, clean or replace them, and then reassemble the whole thing according to the factory arrangement of components.
With this solution, the user can take care of regular servicing of the intake system on his own, which is one of the easiest and cheapest ways to keep the engine in great shape for many seasons.
Original kit - complete engine air filter Emak
Emak complete engine air filter
For models (11/2013 onwards.): K500 / K600 / K650 / K700 / K800
Included: filter base / prefilter / air filter / filter cover
Complete Emak K500-K800 filter set - base, pre-filter, filter and cover
The biggest advantage of the L66150717 model is that you get a complete, ready-to-install filter kit. The set includes:
- filter base - a component mounted directly to the engine, stabilizing the entire system,
- pre-filter (sponge) - the first barrier to retain larger contaminants,
- the main air filter - a precision paper cartridge that captures fine dust,
- filter cover - durable housing to protect the interior from dust, moisture and mechanical damage.
With a complete set, you don't have to complete parts separately or worry about compatibility. Each component fits together perfectly, which reduces installation time and minimizes the risk of leaks. In everyday use, this means fewer firing problems, even engine operation, and stable power even under heavy load - for example, when tilling deep soil with a tiller or mowing dense, wet grass.
During intensive seasonal work, the completeness of the set also facilitates service - if necessary, you can replace the whole thing, quickly restoring the machine to full efficiency. This is a convenient solution for both home users and professionals operating several machines simultaneously.
Emak K500-K800 air filter L66150717 - applicable to models from 11/2013 onwards
The presented air filter set is designed for Emak engines used in models manufactured from November 2013 onwards. Compatible units are:
- K500
- K600
- K650
- K700
- K800
Machines based on these engines usually work in demanding conditions - in home gardens, on recreational plots, in professional gardening companies or farms. The use of a suitable air filter is crucial wherever there is a lot of dust, soil, plant debris and other fine pollutants in the air.
In practice, the L66150717 filter will work well during:
- many hours of mowing lawns around the house, where the mower constantly stirs up dust and dry grass,
- cultivation of compacted soil with a tiller in the vegetable garden, especially in dry periods,
- municipal work - such as maintaining green areas around public buildings,
- farm applications - for work around the farmyard, in orchards or on gravel areas.
Choosing the right filter ensures full compatibility with the engine, which minimizes the risk of power loss, uneven operation or premature wear of piston rings and cylinder.
Quality, durability and reliability - benefits for the user
Using a complete air filter Emak K500-K800 L66150717 offers a number of tangible benefits:
- Higher engine life - effective filtration reduces the entry of contaminants into the combustion chamber, which slows down the wear of moving parts.
- Better working culture - Clean air means stable revs, easier starting and less tendency for the engine to "choke" under load.
- Lower fuel consumption - Optimized fuel-air mixture improves combustion, making the engine more economical.
- Protection against failures - regularly serviced filter reduces the risk of costly repairs such as cylinder or piston replacement.
For the owner of a lawn mower or rotovator, this means less downtime during the season, fewer service expenses, and greater comfort - the machine simply works when it is needed, regardless of the intensity of use and terrain conditions.
Examples of daily applications of the Emak K500-K800 filter
In practice, the Emak L66150717 complete air filter works well in many common scenarios:
- Regular mowing of the lawn by the house or on the plot - with frequent mowing during the season, the filter is exposed to constant contact with dust and grass residues. Replacement with a new set significantly improves the power of the mower and the stability of its operation.
- Preparing the garden for spring - When loosening the soil with a soil tiller, large amounts of dust are generated. A well-chosen filter protects the engine during the peak load period.
- Cleaning work around buildings - on gravel and paved areas, the filter traps fine sand and dust that would otherwise enter the cylinder.
In either case, using a complete, factory-fitted filter kit is a simple way to maintain high machine performance and reduce unscheduled service visits.
Technical data and key product information
- Purpose: complete air filter housing and cartridge for Emak engines
- Engine models: K500, K600, K650, K700, K800 (manufactured since 11/2013)
- Components included: filter base, prefilter, main air filter, filter cover
- Type of main filter: paper filter (dry)
- Pre-filter type: sponge (foam) filter
- Product type: original spare / service part
- Product code / system code: L66150717
The use of the original kit with code L66150717 guarantees full dimensional and material compliance with the requirements of the engine manufacturer, which is particularly important in the case of machines operating under heavy load in variable weather conditions.
How to take care of your Emak air filter to make it last as long as possible?
Although the air filter is a consumable item, proper care can significantly extend its life and maintain high filtration efficiency. Recommended:
- regularly check the condition of the prefilter - especially after working in a very dusty environment,
- periodic cleaning of the prefilter sponge (according to the manufacturer's recommendations) or its replacement,
- inspection of the main paper cartridge and replacement if visibly dirty, discolored or damaged,
- checking the tightness of the cover and the correctness of the installation of the entire set.
For home users, it is good practice to inspect the filter at least once a season, while for intensive professional use - even every dozen hours of operation. This will ensure that the engine is protected at all times and that the machine retains its full power and ease of starting.
The most common symptoms of a worn or dirty air filter
Replacing the air filter with a new, complete set of Emak K500-K800 L66150717 is advisable when you notice:
- a drop in engine power, especially under load,
- difficulty firing up after a long stop,
- uneven idling, "choking" of the engine after adding gas,
- increased fuel consumption compared to earlier seasons,
- pronounced dirt, clogging or mechanical damage to the filter cartridge.
Noticing any of these symptoms is a signal that the intake system needs service. Changing the filter is one of the simplest and cheapest actions that can quickly restore full efficiency of the engine.
FAQ - frequently asked questions about Emak K500-K800 air filter L66150717
1. Does the Emak L66150717 filter fit all K500-K800 engines?
The filter is designed for K500, K600, K650, K700 and K800 engine models manufactured from November 2013 onwards. Before you buy, it's a good idea to compare the part code with the designation in the machine manual or on your existing filter.
2. How often should you change the air filter in the Emak engine?
Frequency of replacement depends on the intensity of use and operating conditions. For standard domestic use, it is recommended that the filter be checked at least once a season and replaced if visibly dirty. When working professionally or in a very dusty environment, it is advisable to perform the inspection much more often.
3. Can I use just the filter cartridge alone without replacing the whole set?
Technically, it is possible to replace the cartridge itself, but the set L66150717 also includes a pre-filter, base and cover, which ensures full tightness and proper operation of the entire system. In case of wear or damage to the housing, it is recommended to replace the complete set.
4. Does filter installation require specialized tools?
Not. The design of the filter system is simple and suitable for quick installation. In most cases, a basic screwdriver or wrench is enough to unscrew the cover. Installation of a new set can be done by yourself, following the instructions for the machine.
5. What are the benefits of using an original Emak filter instead of a replacement?
The original Emak K500-K800 L66150717 filter is precisely matched to the engine design, ensures proper airflow and effective filtration. This reduces the risk of contaminants entering the cylinder, guarantees adequate engine power and stable operation, and minimizes the risk of damage caused by insufficient air cleaning.
6. How to recognize that the filter is properly installed?
After installation, the prefilter and paper cartridge should be evenly seated in the base, without creases. The cover must fit tightly, and all hooks and screws - be closed or tightened carefully. The engine after starting should run steadily, with no signs of "throttling" when adding gas.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.