KNIFE 530MM FOR OM108L SERIES TRACTOR / GLX20-108 G182004357E0
- The 530mm blade for OM108L / GLX20-108 series tractor G182004357E0 is a heavy-duty, precisely balanced cutting blade for the 108cm unit. Provides even mowing, stable mounting (18 mm hole, 8.5 mm side hole, 65 mm spacing) and protection for gearbox and mot
530MM BLADE FOR OM108L SERIES TRACTOR / GLX20-108 G182004357E0 - PROFESSIONAL BLADE FOR PERFECT GRASS CUTTING
The 530mm blade for OM108L / GLX20-108 series tractor G182004357E0 is a high-quality working blade designed for garden tractors equipped with a 108 cm cutting deck. Provides precise, even mowing of large areas of lawn, increasing the comfort and efficiency of your machine. Robust construction, properly selected length and width, as well as precise placement of mounting holes guarantee a perfect fit for the right tractor models and trouble-free installation.
The presented blade is designed for use in demanding garden conditions - it performs well on both dense and taller lawns. This is a reliable consumable component that should be replaced regularly to maintain maximum cutting quality, protect the transmission and cutting unit, and extend the life of the entire garden tractor.
| length: 530 mm, width: 58 mm, Ø center hole 18 mm, Ø side hole 8.5 mm, distance between holes 65 mm; for tractor series OM108L ; GLX20-108 |
These parameters ensure a secure and stable installation and a perfect alignment of the blade with the drive train of the tractor mower. As a result, work is carried out smoothly, without excessive vibration, and the grass is accurately cut across the entire working width.
OM108L / GLX20-108 tractor blade - precise fit and easy installation
The 530mm blade for the OM108L / GLX20-108 G182004357E0 series tractor is designed to work perfectly with specific models of garden tractors equipped with a cutting unit with a width of about 108 cm. It's the precise fit that means the user doesn't have to worry about compatibility or complicated installation - all you need to do is properly install the blade on the hub, tighten the mounting bolt, and you're ready to get to work.
A central hole with a diameter of 18 mm and side holes with a diameter of 8.5 mm, with a spacing of 65 mm, guarantee stable blade seating and safe operation even in tougher mowing conditions. Adequate length of 530 mm and a width of 58 mm enable a wide working belt, which translates into fewer passes when mowing large areas.
In practice, this means shorter operating times and less fuel or energy consumption, as well as less strain on the drivetrain. Owners of larger gardens, orchards, recreational areas or corporate properties will appreciate the fact that with one tractor and a properly selected blade they are able to quickly mow even extensive lawns.
Durability, safety and reliability of the 530mm knife in daily use
The 530mm blade for OM108L / GLX20-108 series tractor G182004357E0 is made of durable steel, resistant to the impact of small stones, twigs and other elements that may be on the lawn. Suitable hardness of the material ensures long life of the blade, reducing the need for frequent replacements. By sharpening regularly, you can extend the trouble-free life even further.
User safety is a priority - stable blade mounting and balance reduce the risk of excessive vibration that could lead to damage to the hub, bearings or the entire cutting unit. A well-chosen and efficient blade also means a lower risk of breaking drive belts, and thus lower costs for servicing the tractor in the long run.
In everyday use, the 530mm knife will work well for both private garden owners and landscaping service providers. Owners of guesthouses, hotels, resorts or sports facilities will appreciate that the reliable blade keeps the lawn looking aesthetically pleasing and the mowing is done without unnecessary downtime.
Use of 530mm blade - ideal lawn mowing effect on large areas
The 530mm blade for OM108L / GLX20-108 G182004357E0 series tractor is designed for mowing large grassy areas - home gardens, recreational plots, residential community areas, public facilities or corporate green spaces. The appropriate profile of the blade ensures efficient cutting and ejection of grass, which promotes even distribution of the cut material over the lawn surface or its efficient transport to the basket (depending on the design of the tractor).
In practice, the user can use this knife for:
- regular weekly mowing of a well-groomed lawn during the growing season,
- mowing taller grasses after periods of heavy rainfall, when the grass grows faster,
- maintenance of turf around alleys, driveways, ponds and other garden features,
- cleaning procedures in recreational areas, playing fields, recreational clearings.
Using the right blade improves not only the aesthetics of the lawn, but also its condition. An even, sharp cut minimizes fraying of the tips of the blades, so the turf better withstands intensive use, is less susceptible to dryness and disease, and remains intensely green in color.
Why you should replace the blade in the tractor with a new model 530mm OM108L / GLX20-108?
A worn, chipped or crooked blade on a garden tractor is one of the main causes of poor mowing quality. This manifests itself in frayed, unevenly cut grass, streaks, leaving uncut clumps, and increased noise and vibration during operation. Replacing the old blade with a new 530mm blade for OM108L / GLX20-108 series tractor G182004357E0 allows you to immediately restore the original efficiency of the mower and regain a high level of working comfort.
A new blade is also an investment in the longevity of the entire tractor - a well-balanced and sharp blade puts less strain on the engine and transmission, so the unit wears out more slowly and is less prone to breakdowns. This is especially important for professional users, for whom equipment downtime means real financial losses and the need to postpone orders.
Garden owners will quickly notice the difference in the effect of mowing: the grass after the passage of the tractor looks even, without "waving", and the edges at flower beds or driveways are neatly trimmed. The efficient blade also allows mowing at lower speeds, resulting in lower fuel consumption and noise levels.
Installation and operation of the 530mm blade - practical tips for the user
Installation of the 530mm blade for the OM108L / GLX20-108 G182004357E0 series tractor is simple and requires no special tools - just the right wrenches and basic safety precautions. Before starting work, disconnect the power to the tractor (remove the key, disconnect the spark plug wire), raise the machine or cutting unit in accordance with the manufacturer's recommendations, and block the rotation of the blade with a suitable wedge or block.
Then simply unscrew the bolt holding the old knife, remove it from the hub, clean the installation site and insert the new knife, paying attention to the correct alignment (the cutting side must be facing the right direction). After tightening the bolt to the correct torque, the tractor can be lowered and a short mowing test can be performed in a safe place.
In daily use, it is worth it:
- regularly check the condition of the blade - whether any chipping or warping has occurred,
- sharpen the knife from time to time to maintain a high quality cut,
- avoiding raiding stones, metal parts or tree roots,
- after the season, thoroughly clean the blade from grass residue and protect it from corrosion.
Technical specifications of the 530mm blade for the OM108L / GLX20-108 series tractor
The key technical parameters of the product have been collected below to make it easier to match the blade to a specific model of tractor and to compare it with other blades available on the market:
- Overall length of the knife: 530 mm
- Knife width: 58 mm
- Center hole diameter: 18 mm
- Diameter of side holes: 8.5 mm
- Distance between side openings: 65 mm
- Purpose: for OM108L series tractor, GLX20-108 (cutting unit approx. 108 cm)
- Product type: cutting knife / working blade for garden tractor
- Product code / designation: G182004357E0
Such precisely defined dimensions make it easier to choose the right blade in case the original blade needs to be replaced, and also allow the user to make sure that the purchased item will be fully compatible with the garden tractor he owns.
User benefits - why the 530mm knife G182004357E0 is a good choice?
When you choose a 530mm blade for the OM108L / GLX20-108 G182004357E0 series tractor, you are investing in the quality of work, safety and durability of all your equipment. This is a product that combines solid workmanship, accurate technical performance and easy installation. It makes daily lawn care simpler, faster and more efficient.
Key user benefits:
- Saving time - wide mowing belt and reliable cutting allow to mow large areas in a short time.
- Better looking lawn - sharp, well-shaped blade provides an even cut without frayed ends.
- Tractor protection - properly selected blade reduces the load on the drive system, which reduces the risk of failure.
- High comfort - reduced vibration and noise makes mowing less tiring for the operator.
- Certainty of compatibility - clearly defined parameters and purpose for the OM108L / GLX20-108 series make it easier to choose the right blade.
Whether you use your garden tractor a few times a month or every day as part of your service business, a sturdy 530mm blade is a key component that translates into quality work and satisfaction with the machine's use.
FAQ - Frequently asked questions about the 530mm blade for OM108L / GLX20-108 series tractor G182004357E0
Question 1: For which models of tractors this blade fits?
The 530mm blade G182004357E0 is designed for OM108L series and GLX20-108 series garden tractors equipped with a cutting unit with a width of approximately 108 cm. Before buying, it's a good idea to compare the dimensions and hole spacing with the original blade or data from the tractor manual.
Question 2: How often should the blade in the tractor be replaced?
Frequency of replacement depends on the intensity of use and operating conditions. With regular mowing under standard conditions, it is recommended to check the condition of the blade at least once a season. If the blade is chipped, warped or overly worn, replace it with a new one to maintain safety and mowing quality.
Question 3: Can the knife be sharpened?
Yes, the knife can be sharpened periodically, making sure to maintain the correct angle and evenly remove material from both sides, so as not to disturb the balance. It is a good idea to have the sharpening done by a service center or to do it with the right tools, observing safety rules.
Question 4: How to recognize that the knife is worn out?
Wear and tear of the blade is evidenced by: visible chipping, kinking, significant shortening of the cutting edge width, deformation, and uneven cutting of the grass (frayed tips, streaks, left clumps). If you notice any of these symptoms, it's worth replacing the knife with a new 530mm model.
Question 5: Is this knife balanced at the factory?
Yes, the 530mm blade for OM108L / GLX20-108 series tractor G182004357E0 is pre-balanced at the factory, which when properly installed ensures smooth and safe operation. After any sharpening, it is worth checking the balance of the knife to avoid excessive vibration.
Question 6: Is it possible to install this knife yourself?
Yes, it is possible to install the blade yourself, as long as you follow the safety rules: disconnect the power supply to the tractor, immobilize the blade before unscrewing, use the right tools and tighten the screws to the right torque. If in doubt, you can seek the assistance of an authorized service provider.
Question 7: How to store a knife in the off-season?
After the season is over, it's a good idea to disassemble the blade, clean it of grass and soil residue, dry it, and protect it with a thin layer of oil or anti-corrosion grease. Store the knife in a dry place, out of the reach of children, preferably in its original packaging or wrapped in material that protects the cutting edges.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.