RIGHT BLADE 460MM FOR OM90C/91C/91PLUS/92C/93/93C / GLX20-92 SERIES TRACTOR G182004345E1
- Right blade 460 mm G182004345E1 for OM90C-OM93C and GLX20-92 tractors. High-quality steel, perfect balance, clean grass cutting and less vibration. Reliable cutting blade for professional mowing of large lawns.
RIGHT BLADE 460MM FOR OM90C/91C/91PLUS/92C/93/93C / GLX20-92 series tractor G182004345E1 - professional blade for perfect lawn mowing
Right blade 460 mm for OM90C/91C/91PLUS/92C/93/93C / GLX20-92 G182004345E1 series tractor is a high-quality cutting element designed for a wide range of garden tractors. Properly selected length, width and diameters of mounting holes guarantee a secure fit, smooth operation of the cutting system and even mowing even on large areas. Made of durable steel, the blade ensures long life, safety and precise cutting of grass, which translates into an aesthetically pleasing lawn around the house, garden or recreational facility.
What is the 460 mm right-hand knife for OM90C/91C/91PLUS/92C/93/93C series tractor / GLX20-92 G182004345E1?
The 460 mm right-hand blade is an originally designed working blade for garden tractors, which is designed to effectively cut the grass and distribute it evenly in the working area. This is a component that is subjected to intensive use - it works in harsh conditions, often in contact with sand, small stones or twigs. Therefore, it was made of high-quality steel with increased resistance to abrasion and mechanical deformation.
Precisely shaped tips and properly selected blade geometry ensure efficient grass lifting and ejection, which facilitates both side discharge mowing and further shredding of the swath (mulching - if the design of the tractor allows it). Due to the proper rigidity and balance of the blade, vibrations are reduced, which protects the gears, cutting shaft and bearings in the mower deck.
Where does the 460 mm right-hand knife G182004345E1 fit and what models it fits to??
Right 460 mm blade is mounted in the cutting unit (mowing unit) of the garden tractor - on a special shaft or mounting hub. Depending on the model of the tractor mower, it can work in tandem with the left-hand knife or be one of several knives that co-form a wide cutting unit. The offered model was designed for garden tractors of the series:
- OM90C
- OM91C
- OM91PLUS
- OM92C
- OM93
- OM93C
- GLX20-92
Proper fit is ensured by mounting holes of the correct diameter and proper spacing. As a result, knife replacement is quick, without the need for additional modifications, and after installation, the cutting unit retains its factory operating parameters.
Use of 460 mm right-hand blade - efficient mowing of large areas
Right blade 460 mm G182004345E1 is designed for intensive, regular mowing of large green areas. It is perfect for both home gardens and lawn care at commercial facilities such as guesthouses, hotels, resorts and sports facilities. Combined with the right tractor, it makes it possible to conveniently and quickly maintain areas numbering in the thousands of square meters.
The blade provides a clean, even cut - instead of tearing and shredding blades of grass. This translates not only into a better-looking turf, but also a healthier plant root system, less risk of disease and faster recovery after mowing. The knife is ideal for m.in. at:
- regular lawn mowing around the house, lot or residence,
- maintenance of green areas at companies, warehouses and industrial plants,
- grass maintenance in recreational areas, squares and parks.
Right blade 460 mm for OM90C-OM93C / GLX20-92 tractor - key advantages, durability and safety
The 460mm right-hand knife is designed to meet the needs of both individual users and professional landscaping companies. It is distinguished by:
- High wear resistance - the steel used in the production of the knife is characterized by high hardness and durability, so the blade retains its cutting properties for a long time. This reduces the frequency of replacement and sharpening, reducing operating costs.
- Stable operation and less vibration - proper blade balance reduces vibrations transmitted to gears, bearings and the entire tractor. This translates into greater operator comfort, lower noise levels and longer machine life.
- Safety of use - properly selected blade dimensions and geometry ensure predictable blade behavior during operation. Installation in accordance with the recommendations of the tractor manufacturer minimizes the risk of failure and uncontrolled damage to the mower deck.
For these reasons, the 460mm blade is a popular choice for users who want trouble-free, quality mowing and comfort for many seasons of use.
Technical specification of 460 mm right-hand knife G182004345E1
Accurate technical parameters of the knife are crucial for its correct selection and safe operation. Below is a summary of the basic data:
- Overall length: 460 mm
- Width: 55 mm
- Center hole diameter: 18 mm
- Side hole diameter: 8.5 mm
- Distance between holes: 65 mm
- Purpose: for OM90C/91C/91PLUS/92C/93/93C and GLX20-92 series tractor
- Product code / designation: G182004345E1
length: 460 mm, width: 55 mm, Ø center hole 18 mm, Ø side hole 8.5 mm, distance between holes 65 mm; for tractor series OM90C/91C/91PLUS/92C/93/93C ; GLX20-92
When selecting a blade for your tractor, it is a good idea to verify these parameters with the data found in the machine's manual or on the original, used blade. Only full conformity of dimensions and shape guarantees quiet, stable operation and user safety.
How to take care of a tractor blade so that it serves for many seasons?
To realize the full potential of the 460mm right-hand knife, it is worth taking care of its proper operation and maintenance. Regular maintenance of the blade allows you to maintain a high quality of cut and work safety. After the season is over, it is recommended that the blade be thoroughly cleaned of grass residue, soil and rust, and checked for cracks or severe deformation.
Periodic sharpening of the cutting edge restores its effectiveness, and balancing after sharpening prevents excessive vibration. Before installation, make sure that the contact surfaces of the blade and hub are clean and the mounting screws are undamaged. Combined with a quality knife such as G182004345E1, proper maintenance will ensure trouble-free operation of your garden tractor for years to come.
Why choose the 460 mm right-hand blade G182004345E1 for your tractor?
Choosing the right blade has a direct impact on the comfort of your work, the appearance of your lawn and the life of your entire tractor. Model G182004345E1 is an investment in proven technology. Precise workmanship, refined dimensions and high quality material translate into:
- sure fit with compatible OM90C-OM93C and GLX20-92 series models,
- stable operation of the cutting system even during prolonged mowing,
- excellent cutting quality - dense and aesthetically pleasing turf without jagged ends,
- reduced operating costs due to long blade life.
The 460mm right-hand knife will work well for users looking for convenience in daily garden maintenance, as well as for garden service companies that require reliable, heavy-duty accessories.
FAQ - Frequently asked questions about the 460 mm right-hand blade for OM90C/91C/91PLUS/92C/93/93C / GLX20-92 tractor
1. Will the 460 mm right-hand knife G182004345E1 fit my tractor?
The blade is designed for OM90C, OM91C, OM91PLUS, OM92C, OM93, OM93C and GLX20-92 series garden tractors. Before buying, it is a good idea to compare the blade length and the diameters and spacing of the mounting holes with the data of the original blade or the specifications of the machine manufacturer.
2. How often should you sharpen the blade in a garden tractor?
Sharpening frequency depends on work intensity and mowing conditions. For typical backyard use, it is a good idea to check the condition of the blade every few mowings and sharpen it at least once a season. For professional use - even several times a season, so that the cutting edge is always sharp.
3. Can I replace the blade in the tractor myself?
Yes, it is possible to replace the knife yourself, provided that safety rules are observed. Before disassembly, disconnect the power source (key, battery, spark plug wire), block the blade rotation and use the appropriate tools. The fixing screws must be tightened to the recommended torque. If you are inexperienced, it is worthwhile to outsource this activity to a service provider.
4. What is the difference between a right-hand knife and a left-hand knife?
The right-hand and left-hand knives differ in the direction of operation and the contouring. Many tractors are fitted with two or more blades that rotate in opposite directions, so it is important to choose exactly the type (right/left) that the manufacturer of the cutting unit has stipulated.
5. How to recognize that a knife is suitable for replacement, not just sharpening?
Replace the knife with a new one when it is visibly bent, cracked, has a large loss of material or the correct cutting edge can no longer be obtained during sharpening. Operating a defective blade puts the tractor at risk of failure and poses a danger to the operator and those in the vicinity.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.