LEFT-HAND KNIFE 525MM FOR KROSSER 92 SERIES TRACTOR C74204021A
- LEFT BLADE 525MM FOR KROSSER 92 SERIES TRACTOR C74204021A - original blade for tractor mowers. Durable steel, perfect fit, clean grass cutting and less aggregate vibration. Ideal for 92 cm decks.
LEFT BLADE 525MM FOR KROSSER 92 SERIES TRACTOR C74204021A is a high quality, dedicated cutting blade designed for KROSSER 92 series garden tractors. Provides even, clean mowing of large areas of lawn, guaranteeing a perfect visual effect and healthy-looking turf. The carefully designed profile of the blade improves air circulation in the cutting unit, which makes it easier to lift blades of grass and efficiently eject them or collect them in the garbage can.
The product is made of durable steel, resistant to wear and tear and mechanical damage resulting from intensive use in home gardens, orchards, recreational areas or company grounds. Precise finish and well-defined dimensions make the blade perfectly fit the corresponding models of KROSSER 92 series tractors, ensuring safe and stable operation of the machine.
length: 525 mm, width: 76 mm, Ø center hole ì 25x16.7 mm; for KROSSER92 series tractor
Manufacturer code: C74204021A
KROSSER 92 C74204021A left-hand knife 525 mm - what it is and why it is so important for mowing quality?
LEFT KNIFE 525MM FOR KROSSER 92 SERIES TRACTOR C74204021A is an original profiled working blade installed in the cutting unit of a garden tractor. This is the element directly responsible for cutting the grass - its quality, sharpness and geometry depend on it:
- accuracy and evenness of cut - The well-shaped blade minimizes fraying of the ends of grass blades, so the turf remains lusciously green without yellowing;
- efficiency of the tractor - The blade with the correct length of 525 mm and the right angle of inclination reduces cutting resistance, relieving the burden on the engine and power unit drive;
- safety of use - properly selected, factory-balanced blade reduces vibration, reduces the risk of damage to bearings, drive belt and the entire body of the unit.
In practice, this means that by choosing this model of blade, you are investing in stable and trouble-free operation of the tractor, as well as in the aesthetic, professional appearance of your lawn. It's ideal for users who regularly mow larger areas - from a backyard garden of a few hundred square meters to sprawling properties of more than 2,000-3,000 sq. ft.
Where the LEFT KNIFE 525MM FOR KROSSER SERIES TRAKTOR 92 C74204021A is mounted?
The left-hand knife with a length of 525 mm is designed for installation in the cutting unit of KROSSER 92 series tractors. This means that:
- fits cutting decks with a working width of approx. 92 cm, which use two opposite blades (left and right), working together to fully cover the mowing width;
- is mounted on the shaft (pin) of the knife by means of a central hole of 25 x 16.7 mm - this ensures secure seating and proper torque transfer;
- its line of work is adapted to the design of the aggregate - as a "left-hand knife" it rotates in a certain direction, so do not swap places with the right-hand knife.
When replacing, always pay attention to:
- Arrangement of the old knife before disassembly (direction and side of the blade).
- Thoroughly clean the attachment seat and check the condition of the pin and nut/bolt.
- Thoroughly tighten the new blade according to the recommended torque (information in the tractor manual).
Left-hand knife 525 mm C74204021A installs in such places as:
- garden tractors used in large home gardens,
- machines working in recreational and green areas at hotels, resorts,
- mowing tractors used by gardening companies as service lawn mowing equipment.
Use of left-hand blade 525 mm for KROSSER 92 series tractor - perfect lawn in all conditions
This model of knife is designed for intensive and regular work in various field conditions. Its applications include:
- mowing large, level lawns - It will be perfect for level plots, playing fields, areas in front of company headquarters or around public buildings;
- care of more demanding surfaces - It also does well on gently undulating terrain, in gardens with embankments, slopes or landscape obstacles (trees, shrubs, flowerbeds);
- mowing grass of different heights - with the right speed of the tractor and the height of the aggregate setting, it can cope with both regularly cut turf and slightly higher grass, for example, after a period of heavy rainfall.
Thanks to its sturdy construction and the corresponding 76mm width, the knife provides:
- stability of work - greater width means a stronger edge, more resistant to minor impacts on twigs or small stones;
- better grass lift and ejection - The appropriately contoured back of the blade acts as a fan blade, lifting the grass into the basket or directing it into the ejection channel;
- less load on the aggregate - Designed to reduce cutting resistance and strike the right balance between performance and component protection.
In everyday use, this translates into shorter mowing times for large areas and less operator fatigue - the tractor runs smoothly and the user can concentrate on driving the machine instead of worrying about the quality of the cut.
The most important features of LEFT KNIFE 525MM FOR KROSSER 92 series tractor C74204021A from the user's perspective
Creating an offer for discerning users of garden tractors, it is worth highlighting the key features of the left-hand knife 525 mm C74204021A, which realistically affect the comfort of work and the final result:
1. Perfect fit for the KROSSER 92 series
- Dedicated to a specific series of tractors - guarantees compatibility with the mounting, dimensions of the aggregate and the working geometry.
- Central hole 25 x 16.7 mm - Provides a secure grip on the drive shaft, eliminating the risk of rotation of the knife on the mandrel.
- Appropriate length 525 mm - allows you to achieve a full working width of approx. 92 cm when working with a right-hand knife.
Application example: the owner of a KROSSER 92 tractor, after a season of intensive mowing, replaces the worn out left-hand blade with a new, matching model C74204021A. This gives back an even mowing width and a smooth lawn with no gaps.
2. High durability and resistance to damage
- Extra strength steel - Adapted for use in harsh garden conditions;
- Abrasion resistance - The cutting edge maintains performance for a long time with proper use;
- Possibility of periodic sharpening - allows you to extend the life of the knife before replacing it with a new one.
Application example: a gardening company serving several large properties seasonally sharpens knives, maintaining their high efficiency. Thanks to its robust design, the C74204021A does not require frequent replacement despite frequent contact with sand or small pebbles.
3. Improve lawn quality and comfort
- Clean cut instead of uprooting the grass - Healthy, dense turf without ragged blade tips;
- Less dusting and scattering of dirt - Proper airflow reduces "grinding" of grass in the aggregate;
- Vibration reduction - A well-balanced blade means less vibration, which translates into operator comfort and longer tractor life.
Application example: when mowing the lawn around the house on a regular basis, the user notices that after replacing it with a new 525 mm left-hand blade, the tractor runs quieter, shakes less, and the grass looks more even and well-groomed - without clumps and shreds.
Technical specifications LEFT KNIFE 525MM FOR KROSSER 92 series tractor C74204021A
- Purpose: kROSSER 92 series garden tractors
- Type: left blade (cutting blade for mower unit)
- Overall length: 525 mm
- Width: 76 mm
- Diameter / shape of the center hole: 25 x 16.7 mm
- Material: hardened, abrasion-resistant steel
- Mounting position: left side of the cutting unit (in a two-blade system)
- Symbol/code: C74204021A
Configured in this way, the blade is fully compatible with dedicated models of tractors, and its replacement does not require modifications or matching mounts.
Customer benefits - why choose the original 525 mm left blade for KROSSER 92?
Deciding to purchase the left-hand knife 525 mm C74204021A, the customer receives a product that realistically affects:
- saving time - Wide, efficient mowing path; one pass of the tractor covers a larger area of lawn;
- lower operating costs - Stable operation without overloading the engine and cutting unit reduces fuel consumption and reduces the risk of failure;
- the aesthetics of the garden - An evenly trimmed lawn improves the appearance of the entire property and increases the comfort of outdoor recreation.
It is the ideal choice for both homeowners and professional garden service providers who need reliable, efficient attachments for their machines.
FAQ - Frequently Asked Questions about KROSSER 92 SERIES LEFT KNIFE 525MM C74204021A
1. Will this knife fit my tractor?
Left blade 525 mm C74204021A is designed for KROSSER 92 series garden tractors. To make sure it will fit, compare the old knife's length (525 mm), width (76 mm) and center hole dimensions (25 x 16.7 mm) with the data in your machine's manual or with the old knife.
2. Can I swap the left-hand knife for the right-hand knife or vice versa?
Not. The left and right knives are designed to work in a specific direction of rotation and position in the cutting unit. Swapping sides can degrade the quality of mowing, increase vibration and even damage the machine or create a safety hazard.
3. How often should you replace the blade in the tractor?
Frequency of replacement depends on the intensity of use and operating conditions. For typical mowing of a home garden, it is recommended to check the condition of the blade several times a season, and to replace it after noticeable wear, cracks, chipping, or after sharpening several times, when the correct profile of the cutting edge can no longer be maintained.
4. Can you sharpen the knife yourself?
Yes, the knife can be sharpened, but it should be done with safety and attention to the balance of the blade. Uneven collection of material may cause vibration during tractor operation. If you are inexperienced, it is worth using a professional service.
5. What to pay attention to when installing a new knife?
Before installation, disconnect the power (remove the key, disconnect the spark plug wire), block the blade from turning and use the appropriate tools. Always mount the blade according to the mounting direction markings, keeping the correct side of the blade. Tighten the bolt/nut to the recommended torque and inspect after the first few hours of operation.
6. Will this blade improve the quality of mowing compared to a worn blade?
Yes. The new balanced and sharp 525mm left-hand blade significantly improves the quality of mowing - the grass is cut more evenly and the turf recovers faster. In addition, vibration and noise are reduced, which affects user comfort and the durability of the machine.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.