RIGHT-HAND KNIFE 525MM FOR KROSSER 92 SERIES TRACTOR C74204020A
- Original right blade 525 mm for KROSSER 92 tractor (C74204020A). Hardened steel, perfect balance, hole 25 x 16.7 mm. Guarantees a clean, even cut and long, trouble-free operation of the mower.
RIGHT BLADE 525MM FOR KROSSER 92 SERIES TRACTOR C74204020A - PROFESSIONAL BLADE FOR LAWN TRACTORS
The right-hand 525 mm blade for KROSSER 92 series tractor C74204020A is a high-quality, heavy-duty cutting blade designed for professional and home lawn tractors with a 92 cm wide mower deck. Thanks to its precision manufacturing, perfect balance and tailored dimensions, it ensures a clean, even lawn cut, less strain on the gearbox and motor, and longer life for the entire machine.
length: 525 mm, width: 76 mm, Ø center hole 25x16.7 mm; for KROSSER92 series tractor
This is the original right-hand blade mounted on KROSSER 92 series tractors, designed for intensive use. High-hardness steel, properly shaped cutting edges and a special profile to improve the ejection or collection of grass make it a component that realistically increases the comfort and efficiency of mowing.
What is the right-hand knife 525 mm for KROSSER 92 series tractor C74204020A?
RIGHT BLADE 525MM FOR KROSSER 92 SERIES TREATER C74204020A is the working element (cutting blade) of the mower unit, responsible for precise cutting of grass blades at the set height. "Right" means the direction of its operation and installation on the right side of the aggregate (as seen from the position of the operator sitting on the tractor). The knife works together with the left-hand knife to form an effective cutting system for scythes with a working width of 92 cm.
The blade is made of hardened tool steel, resistant to hitting small stones or twigs, which minimizes the risk of chipping. A length of 525 mm and a width of 76 mm guarantee optimum cutting range, while a center hole measuring 25 x 16.7 mm allows an exact fit with the drive shaft and mounting system on KROSSER 92 series tractors.
The knife is factory sharpened and balanced, significantly reducing vibration during operation. As a result, the components of the cutting unit - bearings, belts, gears - are less stressed, which translates into longer trouble-free operation time. This is a key element for all users who want reliability and an aesthetically pleasing mowed lawn from their tractor.
Where the 525 mm KROSSER 92 C74204020A right-hand knife is installed and how it works in the mower deck?
The 525 mm right-hand knife is mounted on the right spindle (right shaft pivot) in the cutting unit of the KROSSER 92 series tractor. The 92 cm wide deck uses two knives - left and right - that overlap their cutting paths during operation, providing a uniform, even mowing width. The 25 x 16.7 mm center hole works with a dedicated mount to keep the knife firmly in place and prevent it from moving during operation.
While rotating at high speed, the blade not only cuts the grass, but also generates a jet of air that lifts the blades and directs them into the collection basket or tosses them aside (depending on the tractor configuration). Appropriately shaped wings and ribbing on the blade surface improve air circulation, resulting in more efficient filling of the garbage can and less clogging of the ejection channel.
In practice, the user installs the right-hand knife:
- in KROSSER 92 series tractor-mowers as the original working blade,
- as a spare part when replacing a worn, chipped or deformed knife,
- as an additional working set - for example, a second set of blades used interchangeably during the intensive mowing season.
Proper installation ensures quieter operation, less vibration and an even cutting line, which is especially important on large lawns, playing fields, recreational areas and around private properties where aesthetics matter.
Use of right-hand blade 525 mm for KROSSER 92 series tractors - precise cutting on large areas
KROSSER 92 C74204020A right-hand knife 525 mm is designed for:
- kROSSER 92 series tractor-mowers equipped with a 92 cm aggregate,
- home applications - large gardens, extensive lawns around single-family homes, recreational plots,
- semi-professional applications - residential areas, corporate areas, grass fields, campgrounds,
- maintenance of greenery in municipal areas - parks, squares, recreational areas.
In each of these applications, three features are key:
- Even cutting line - 525 mm long blade allows you to quickly cut a large area while maintaining an even grass height. This gives an aesthetically pleasing "carpet" effect, appreciated by garden owners and greenery managers.
- Durability for intensive work - hardened steel and reinforced construction withstand contact with small obstacles on the lawn (cones, twigs, gravel). This is important in areas where mowing is done frequently, such as company grounds or training fields.
- Efficient grass collection - the appropriate contouring of the blade improves air flow, so that the tractor basket fills evenly and the ejection channel is less likely to become clogged. This makes it easier to maintain order around residences or service facilities, for example.
Examples of daily use:
- Regular mowing of a lawn of 1500-3000 m² at a single-family house.
- Operating a tractor in a small gardening company maintaining several customer properties.
- Mowing of recreational areas at a guesthouse, hotel or resort.
Durability, reliability and cutting quality - KROSSER 92 C74204020A right-hand knife in daily use
The 525 mm right-hand knife is designed for years of heavy use. Thanks to its robust construction and high-quality materials, it provides:
- High resistance to wear and tear - the blade retains its cutting properties even with frequent mowing, which reduces the frequency of sharpening and replacing the blade.
- Stable operation of the unit - Precise balancing reduces vibrations that could lead to cracking of fasteners or excessive bearing wear.
- User security - the use of suitable material and matching the original mount minimizes the risk of damage during operation, as long as the manufacturer's installation rules are followed.
At home, the knife allows you to comfortably mow every few days during the peak season, while in gardening companies it works well for daily use on many sites. Longer life of the working element means real savings - you buy new blades less often and the tractor spends less time in service.
Technical parameters of the right-hand knife 525 mm for KROSSER 92 series tractor C74204020A
| Destination | Right blade for KROSSER 92 series tractor-mower |
| Overall length | 525 mm |
| Width | 76 mm |
| Center hole | 25 x 16.7 mm |
| Knife type | Right (mounted on the right side of the cutting unit) |
| Application | Mowing of home lawns, company grounds, recreational facilities |
| Product code | C74204020A |
The selection of a blade with exactly these parameters is crucial for the proper operation of the tractor. A blade that is too short or too long can not only degrade the quality of mowing, but also lead to mechanical damage to the unit. The 25 x 16.7 mm center hole must perfectly match the axle and mounting system - so by choosing this model you are assured of full compatibility with KROSSER 92 series tractors.
User benefits - why choose the original KROSSER 92 C74204020A right-hand knife?
When you choose the original 525 mm right blade for the KROSSER 92 series tractor, you get:
- Perfect fit - no need for alterations or making holes. The blade fits directly into dedicated tractors, reducing replacement time and eliminating the risk of incorrect installation.
- Better mowing quality - evenly cut grass and fewer "ragged" blades result in a healthier looking lawn, reducing the risk of fungal diseases and dryness.
- Higher equipment reliability - correct balance and blade adjustment reduces the mechanical load on the tractor, resulting in less wear and tear on drive components and lower service costs.
In practice, this means that:
- after one pass of the tractor, the lawn looks aesthetically pleasing, and any corrections are minimal,
- you spend less time on maintenance - sharpening and replacing the knife is done less often,
- your tractor stays in full working order longer, and the investment in a brand-name blade pays off quickly.
How to take care of the 525 mm KROSSER 92 right-hand knife to make it last as long as possible?
Proper operation and maintenance of the blade significantly extend its life and ensure high quality cutting throughout the season. Here are the most important recommendations:
- Regular cleaning - after finishing mowing, it is a good idea to remove the remains of grass, soil and mud from the surface of the blade. This prevents corrosion and the adhesion of subsequent layers of dirt.
- Periodic sharpening - depending on the intensity of use, the knife is worth sharpening every few hours of work. The dull blade "jerks" the grass instead of cutting it cleanly, which negatively affects the condition of the lawn.
- Damage control - after contact with a rock or hard obstacle, inspect the knife for cracks, excessive warping or chipping. In case of serious damage, the blade must be replaced with a new one.
At home, it is usually enough to inspect the knife every few mowings - checking for burrs on the cutting edge, cleaning and possibly rebalancing after sharpening. Such activities can be done by yourself or at a garden equipment service center.
FAQ - Frequently asked questions about the 525 mm right-hand knife for KROSSER 92 series tractor C74204020A
Question 1: Will this blade fit my KROSSER 92 tractor?
Yes, the right-hand knife 525 mm C74204020A is designed for KROSSER 92 series lawnmower tractors with a 92 cm wide cutting deck and a suitable mounting system (center hole 25 x 16.7 mm). Before you buy, it's a good idea to compare the dimensions with an old knife or check the markings in the manual.
Question 2: Do I need to replace both knives at the same time?
It is recommended to replace both blades (left and right) at the same time in order to maintain the perfect balance of the cutting unit and an even cutting quality across the 92 cm width. Replacing just one badly worn blade can cause differences in mowing height and more vibration.
Question 3: How often should I sharpen my knife?
Sharpening frequency depends on work intensity and lawn conditions. For standard backyard use, it is recommended to inspect and possibly sharpen every few mowings. In professional applications, this may be necessary even every dozen hours of operation. It is important to maintain the correct sharpening angle and rebalance the knife.
Question 4: Can I replace the blade in the tractor myself?
Yes, many users replace the knives themselves, following the manufacturer's instructions. It is essential to disconnect the ignition/blade clutch, secure the tractor against movement, use the appropriate wrenches, and check the mounting direction (right/left blade). If you don't feel confident, entrust the replacement to a service provider.
Question 5: How do I know when a knife needs to be replaced, not just sharpened?
Replace the knife when it is cracked, severely bent, has deep nicks that are difficult to grind, or when its width has significantly decreased after several sharpenings. A worn blade not only cuts worse, but can also be dangerous to the user and the tractor.
Question 6: Is this blade suitable for mulching?
KROSSER 92 right-hand blade 525 mm is designed primarily for classic mowing with grass ejection into the basket or to the side (depending on the tractor configuration). For professional mulching, special mulching knives are often used. If you plan to mainly mulch, check whether the tractor manufacturer has provided dedicated blades for this mode of operation.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.