520MM BLADE FOR LUX53/ LUX55 SERIES MOWER 8203141R
- Knife 520 mm 8203141R for LUX53 / LUX55 lawn mower - original, heavy-duty steel cutting blade. Perfect fit: length 520 mm, width 75 mm, central hole 24.5 mm, side holes 10 mm, spacing 95 mm. Ensures a clean cut and long, trouble-free mowing operation
520MM blade for LUX53 / LUX55 series mower 8203141R - precision mowing, durability and perfect fit
520 mm blade for LUX53 / LUX55 series lawn mower 8203141R is a high-quality cutting element for LUX series lawn mowers. It is responsible for efficient grass cutting, even distribution of the cut material and safety of the entire mowing process. Made of durable steel, it guarantees long life and stable operation of the device even with intensive regular use on large garden areas.
The presented blade is a spare part with precisely matched dimensions and diameters of mounting holes, which makes it ideal for LUX 53 and 55 series mowers. Proper cutting edge geometry ensures a clean, even cut, resulting in a healthier looking lawn and less susceptibility of blades to disease or dryness.
length: 520 mm, width: 75 mm, Ø central hole 24.5 mm, Ø side hole 10 mm, distance between holes 95 mm; for mower series LUX53/ LUX55
520 mm blade for LUX53 / LUX55 lawn mower 8203141R - what is this item and why is it so important?
520MM KNIFE BLADE FOR LUX53 / LUX55 SERIES MOWER 8203141R is an original-fit working component of the mower, which is directly responsible for the quality of mowing. During operation, it rotates at high speed, cutting the grass at a preset height and producing the appropriate airflow needed to eject or collect the grass into the basket. It is the condition and design of the blade that determines whether the lawn after mowing will look like an evenly trimmed carpet or a ragged surface in need of touch-up.
The blade was designed specifically for the LUX 53 and 55 series mowers - its dimensions, mounting holes and the shape of the cutting edge are matched to the rotational parameters of the machine, the engine power and the grass transport system (side discharge, rear discharge or collection into a basket - depending on the mower model). This gives the user the assurance of safe and trouble-free operation, without vibration or backlash.
In practice, this means that replacing a worn or damaged blade with the 8203141R model restores the mower to full working order, increases comfort and ensures that the engine and drive train are protected from excessive stress resulting from a dull or warped blade.
Where the 520 mm blade of the LUX53 / LUX55 8203141R is mounted and how it affects the operation of the mower?
The 520 mm blade LUX53 / LUX55 8203141R is mounted in the lower part of the mower, directly on the drive shaft coming out of the engine or transmission (depending on the design of the machine). The central hole with a diameter of 24.5 mm is used for seating the knife on the hub, while the side holes with a diameter of 10 mm are used for stable screwing with screws or bolts with a pressure washer, providing a rigid and secure connection. The distance between the holes is 95 mm, which guarantees a perfect fit for the LUX53 and LUX55 series mowers.
Properly installed knife:
- ensures an even load on the shaft and bearings - the mower runs quieter and without excessive vibration,
- enhances safety - a solid factory mount minimizes the risk of the knife coming loose or unscrewing during operation,
- allows you to maintain the correct cutting height - thanks to the appropriate length of 520 mm, the blade covers the entire working width of the machine.
Typical installation applications include:
- replacing a worn, dulled blade on a LUX53 or LUX55 mower after several seasons of intensive mowing,
- repairing the mower after hitting a rock, root, curb or other obstacles that may have twisted or chipped the existing blade,
- restoring full collection capacity to the basket - a damaged blade often does not create adequate vacuum and the grass remains on the lawn.
In daily use, the installation of a new blade translates into a noticeable reduction in mowing time, the ability to work in denser, taller grass and less strain on the engine - the machine tires less, uses less fuel and heats up more slowly.
Use of 520 mm blade for LUX53 / LUX55 mower - perfect lawn in the garden and around the house
520 mm blade for LUX53 / LUX55 series mower 8203141R was created for individual users and people taking care of backyard areas, recreational plots and small areas next to businesses. It will be perfect wherever you want an even, aesthetically pleasing turf and the convenience of mowing.
Example application areas:
- Home lawns - Regular mowing with a sharp blade keeps an even, soft lawn perfect for family recreation, playing with children or pets.
- Recreational plots and allotments - the blade will cope with mowing grass of varying heights and densities, typical of less groomed areas.
- Surrounding companies, workshops, warehouses - well-kept greenery in front of the building enhances the aesthetics of the space and demonstrates the company's professionalism; a new cutter will speed up cleanup work.
Thanks to its robust design and proper balance, the blade also allows you to mow at higher mower speeds, which is important for larger areas - you reduce the number of passes, save time and fuel, while maintaining a high quality cut.
Key technical features of the 520 mm blade 8203141R - a perfect match for the LUX53 / LUX55 series
Technical parameters of the blade play a key role in the safety and efficiency of mowing. Precisely dimensioned to ensure a perfect fit and optimal operation of the cutting unit.
Key specifications:
- Overall length: 520 mm - guarantees full coverage of the working width of the LUX53 / LUX55 series mower.
- Knife width: 75 mm - provides adequate rigidity and the right angle of attack on the grass.
- Center hole diameter: 24.5 mm - matched to the drive shaft/hub used on LUX mowers.
- Diameter of side holes: 10 mm - designed for mounting fixing screws, guarantee the stability of the connection.
- Distance between holes: 95 mm - compatible with the mounting system of LUX53 / LUX55 series mowers.
- Purpose: for LUX53 / LUX55 series mowers.
In practice, proper sizing translates into:
- safe operation without rubbing the blade against the mower housing,
- proper balancing - less vibration, more operator comfort,
- longer bearing and motor shaft life because they are not overloaded by an unbalanced or mismatched cutting element.
This gives the user the peace of mind that the product is fully compatible and safe to use - there is no need to add holes, spacers or other compromises that reduce durability and safety.
Quality, durability and reliability - benefits of choosing 520 mm blade for LUX53 / LUX55 mower
When you choose the 520mm blade 8203141R for your LUX53 / LUX55 mower, you're investing in a component designed for long-lasting, trouble-free use. Its design, material and precise workmanship ensure high resistance to mechanical damage and wear resulting from frequent contact with grass, sand or small stones.
Key user benefits:
- Longer blade life - high quality steel and proper hardening make the blade stay sharp longer and the need for sharpening occurs less often.
- Better looking lawn - Even, clean cutting instead of tugging the blades results in a healthier, intensely green lawn that recovers faster.
- Lower operating costs - you replace the blade less often, the engine runs lighter, and the mower uses less fuel and is less prone to breakdowns.
In everyday use, this means you can mow more often, faster and more comfortably, without worrying about damaging the mower or having to stop frequently for service. For owners of larger gardens or several plots of land, this is a particularly important advantage - a sturdy knife means fewer technical problems during the season.
How to take care of the 520 mm blade 8203141R on LUX53 / LUX55 mowers so that it will last as long as possible?
To realize the full potential of the 520 mm blade for the LUX53 / LUX55 series mower, it is worth following a few simple maintenance rules. They will allow you to maintain high quality cuts for many seasons and minimize the risk of failure.
Practical tips:
- Regular sharpening - depending on the intensity of mowing, it is recommended to sharpen at least once a season, and with frequent use even several times. The sharp blade tires the engine less and cuts the grass without tugging on it.
- Periodic balance check - after each sharpening, it is a good idea to check that the knife is properly balanced. An unbalanced component causes vibrations that can damage the shaft and bearings.
- Removal of contaminants - after you finish mowing, it is a good idea to clean the blade of grass and soil residue. This prevents corrosion and improves the aerodynamics of airflow under the housing.
- Safe installation - always install the cutter with the engine off and the spark plug disconnected. Use the correct screws and tighten them to the recommended torque.
Following the above recommendations will ensure that the 520 mm blade LUX53 / LUX55 8203141R will work reliably, and your mower will remain in great shape for many seasons of intensive use.
FAQ - the most common questions about the 520 mm blade for the LUX53 / LUX55 series mower 8203141R
Question 1: Does the 520 mm blade 8203141R fit any mower?
Answer: No. The blade was designed specifically for the LUX53 and LUX55 series mowers. Before buying, it is a good idea to compare the length of 520 mm, the width of 75 mm and the diameters of the holes (central 24.5 mm, side 10 mm, distance between holes 95 mm) with the parameters of the original blade on your mower.
Question 2: How often should I replace the blade on my mower?
Answer: The frequency of replacement depends on the intensity of use and operating conditions. For typical home use, it is recommended to check the condition of the knife every season. If the blade is badly chipped, crooked or significantly worn, replace it with a new one - such as model 8203141R dedicated to the LUX53 / LUX55 series.
Question 3: Can the 520 mm blade for the LUX53 / LUX55 be independently mounted?
Answer: Yes, you can do the installation yourself, as long as you follow the safety rules: the lawnmower must be turned off, the spark plug disconnected, and the blade firmly fastened with the appropriate screws. If you are inexperienced, it is always a good idea to seek the help of a service.
Question 4: How to recognize that a knife needs to be replaced, not just sharpened?
Answer: A knife is eligible for replacement if it is visibly bent, has deep chips, cracks or its cross-section has become too thin from repeated sharpening. In such a situation, further use may be dangerous - it is recommended to install a new 520 mm blade 8203141R.
Question 5: Does blade sharpness affect fuel consumption?
Answer: Yes. A dull blade creates more resistance, so the mower engine has to work harder, often resulting in higher fuel consumption and higher operating temperatures. Sharp, well-balanced 520 mm blade for LUX53 / LUX55 allows you to mow faster, lighter and more economically.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.