EJECTION CHANNEL CAP FOR MISTRAL 72/GRINDING 68132062
- Ejector channel plug for Mistral 72/12.5KH tractor (68132062) enables professional grass mulching. By closing the side ejection, it shreds the swath into natural fertilizer, improving lawn condition and reducing waste disposal costs. Ideal for Wednesday
Ejection channel plug for Mistral 72 tractor - professional grass grinding 68132062
Ejection channel plug for Mistral 72/grinding 68132062 is a specialized accessory for the Mistral 72/12.5KH garden tractor that turns a standard mower into a powerful system of mulching system. When the cap is installed, the side ejection channel is closed and the grass is repeatedly shredded in the blade housing, resulting in a fine, evenly distributed layer of natural fertilizer on the lawn.
The kit allows you to shred (grind) the cut grass and spread it evenly on the lawn until it decomposes on its own.. Additional equipment for garden tractor Mistral 72/12.5KH. Review photo.
This solution is ideal for owners of medium and large gardens who want to reduce the time spent emptying the trash, disposing of green waste, and at the same time improve the condition of the lawn by providing it with a natural dose of nutrients.
Ejection channel plug for Mistral 72 - what it is and how the grass grinding system works?
Ejection channel plug for Mistral 72/grinding 68132062 is a precision-fit piece mounted in place of the traditional grass ejection channel. Its main task is to to close the ejection path, so that the freshly cut grass remains under the mower housing and is repeatedly cut by the rotating blade.
This process produces very fine fragments - a kind of "green meal" that falls between the blades of grass and does not form visible deposits on the surface. This way of working is called mulching (grinding) and it is especially appreciated by professional gardeners because:
- irrigates and fertilizes the lawn - Shredded grass retains moisture and gradually releases nutrients;
- eliminates the need to collect the swath - no need to use the trash or take the waste to the compost or container;
- speeds up maintenance work - mowing takes less time, as it is limited to only driving the tractor over the lawn.
In practice, this means that one component - an appropriately designed plug - changes the function of the Mistral 72/12.5KH tractor from a classic grass-collecting mower into a an efficient mulching mower.
Where the Mistral 72/grinding ejection duct cap is installed 68132062?
The ejection channel plug 68132062 was designed specifically for the mistral 72/12.5KH garden tractor. It is installed in place of the standard ejection channel - in the side of the mower body, where the grass normally flies outwards.
Installation is done in a few simple steps:
- Tractor shutdown and security - before starting any work, turn off the engine, apply the parking brake and wait for the mower blade to come to a complete stop.
- Removing or opening the factory ejection duct - depending on the version of the equipment, the flap is tilted back or the original ejection tip is removed.
- Attachment of the ejection duct cap - the element is slipped into the guides/mounting holes and secured with appropriate hooks or screws (depending on the mounting version).
- Stability control - Before mowing, check that the cap is firmly seated and has no play.
Installed in this way, the cap forms a tight partition, which directs the airflow and swath back under the knife. This allows the grass to remain in the working cover for a long enough time to be thoroughly ground.
Examples of daily use:
- regular mowing of the lawn next to a single-family house, where there is no room for a composter;
- care of neighborhood greenbelts, where frequent emptying of garbage cans would be uneconomical;
- maintenance of large lawns at guesthouses, resorts or sports facilities.
Use of ejection channel plug for Mistral 72 - ideal for mulching
Ejection channel plug for Mistral 72/grinding 68132062 is used wherever the owner cares about a healthy, dense and aesthetically pleasing lawn, while at the same time on reducing the amount of maintenance work.
Key application areas:
- Mulching of home lawns - with regular mowing (e.g., once a week), the grass is short enough to leave no visible residue after milling. Over time, the lawn becomes greener and more resilient.
- Professional maintenance of green areas - Residential estates, hotels, resorts, recreational facilities, where speed of work and reduction of green waste disposal costs are important.
- Large grassy areas - Parks, recreational areas, auxiliary fields, where mowing with a basket would be too time-consuming.
Benefits of using a grass grinding kit:
- Saving time - No need to stop to empty the grass catcher;
- Lower garden maintenance costs - No grass disposal fees and less need for artificial fertilizers;
- Better lawn condition - The finely ground grass breaks down quickly, feeding the soil and improving its structure;
- Ecology - natural circulation of matter in the garden, without generating unnecessary waste.
Quality, durability and reliability - why choose the original Mistral 72/grinding cap 68132062?
The original ejection channel cap for the Mistral 72 was made of durable plastic, resistant to mechanical damage and moisture. As a result, the item retains its shape and functionality even under heavy use in harsh garden conditions.
Key quality features:
- Exact fit to the mower body - the product was designed specifically for the Mistral 72/12.5KH tractor, which ensures tight closure of the ejection channel and optimal air circulation in the housing.
- Stable mounting system - appropriately designed hooks and guides keep the cap in the correct position, minimizing the risk of its displacement during operation.
- Resistance to outdoor conditions - construction material is resistant to UV radiation, moisture and temperature fluctuations typical of the gardening season.
In daily use, this means that you can perform without worry:
- frequent mowing during the growing season, including on slightly taller grass,
- mulching after rain, when the swath is heavier and wetter,
- intensive use over large areas without the risk of rapid wear of the cap.
Parameters and fit - which devices the ejection duct cap fits 68132062?
The ejection channel plug for Mistral 72/grinding 68132062 is dedicated as a original accessory for a specific model of garden tractor:
- Purpose: mistral 72/12.5KH garden tractor
- Function: grinding (mulching) - closing the side ejection channel
- Product type: ejection channel cap (part of the mulching kit)
- Product code / symbol: 68132062
- EAN code: 8026619078126
- Color: black
- Material: durable construction material (resistant to external conditions)
By using an original component, you are assured:
- full compatibility with the Mistral 72/12.5KH tractor,
- maintain the device manufacturer's warranty (in accordance with the terms of the warranty),
- stable operation of the working system and safety while mowing.
How to take care of the Mistral 72 ejection duct cap so that it serves for years to come?
In order to maximize the life of the ejector channel cap and maintain the highest quality of mulching, it is worth remembering a few simple rules:
- Regular cleaning - after finishing mowing, remove lingering grass and mud from the surface of the cap and the mower channel. This is best done with a soft brush or water jet, avoiding very high pressure directly on the hooks.
- Inspection of fixings - from time to time, it is worth checking that all hooks and any screws remain well tightened and the component has no visible cracks.
- Storage - if you don't use the mulching function in the off-season, store the cap in a dry, shaded place to minimize prolonged exposure to sunlight.
Examples of a practical approach:
- after intensive mowing of damp grass, take a few minutes to remove the remaining swath - you will prevent the formation of a compacted layer and corrosion of metal components near the channel;
- before the start of the new gardening season, install the cap "dry" and check the stability of the fixings;
- if you notice cracks or deformation of the component, replace it to maintain full safety of operation.
Why you should have a grass grinding function in your garden on your Mistral 72 tractor?
Mulching is a modern way of lawn care that is gaining in popularity every year. With the ejection channel plug for Mistral 72/grinding 68132062 you can get the most out of your garden tractor.
The most important benefits from the user's point of view:
- Saving time and manual labor - No more stopping all the time, emptying the garbage can and taking the grass to the compost garbage can or green waste garbage can.
- Lower long-term costs - Less waste, less fertilizer, and less use of waste bags or fuel associated with waste disposal.
- A more beautiful, denser lawn - Regularly mulched grass is better nourished, more resistant to dryness and better able to withstand intensive use (such as children's play, dog traffic or recreational games).
The ejection channel plug is a small component that makes a real difference in the comfort of the garden. If you are serious about lawn care and want to get results similar to those you see on professionally maintained green spaces, grass Milling Kit for Mistral 72/12.5KH is the solution made for you.
FAQ - frequently asked questions about the ejection duct cap for the Mistral 72 / grinding 68132062
Question 1: Does the cap 68132062 fit any Mistral tractor?
No, the cap was designed as an accessory for a specific model Mistral 72/12.5KH. Before you buy, it's a good idea to compare the tractor model designations from the unit's nameplate.
Question 2: Can I still collect grass in the basket after installing the cap?
No, the function of the cap is to closing the discharge channel and mulching operation. To collect grass into the basket again, remove the cap and restore the standard grass ejection system.
Question 3: How often should you mulch your lawn?
The best results come from regular mowing - usually once a week during the period of intensive grass growth. The more often we mow, the finer the clippings are and the faster they decompose.
Question 4: Can mulching harm the lawn?
When used properly - not. It is important not to mulch very tall and wet grass and not to allow a thick layer of lingering debris to form. Finely ground grass breaks down quickly, moistens the soil and provides nutrients to the soil.
Question 5: Is the installation of the ejection duct cap complicated?
Installation is relatively simple and can be done on your own, according to the tractor manual. In most cases, it is limited to inserting the cap into the appropriate guides and securing the hooks. Always perform this operation with the engine off and the knife immobilized.
Question 6: Does the cap require special maintenance?
Just regularly remove grass and mud residues from it and periodically check the condition of the fixings. Storage in a dry place during the off-season will further extend its life.
Question 7: Is the product photo an accurate representation of the item?
The photo is for illustrative, however, shows the real shape and the way of making the ejection channel plug for Mistral 72/grinding 68132062.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.