RIGHT KNIFE 620MM FOR OM124/124J/124JH/124S SERIES TRACTOR 68120046
- Right blade 620 mm 68120046 for OM124/124J/124JH/124S tractors with aluminum mower deck. Durable steel, precise balance, perfect fit of holes. Guarantees an even, aesthetically pleasing cut of grass. Ideal for gardens and green spaces.
Right blade 620 mm for OM124/124J/124JH/124S series tractor 68120046 is a high-quality, precision-made working component of the mower deck, designed for professional and home lawn care. Appropriate shape, length of 620 mm and a set of mounting holes make the blade perfectly compatible with the aluminum mower unit, ensuring even cutting of grass and reliable operation of the garden tractor.
length: 620 mm, width: 55.5 mm, Ø central hole 16 mm, Ø side hole 6 mm, distance between holes 75 mm; for tractor series OM124/124J/124JH/124S - for aluminum aggregate
What is the right knife 620 mm 68120046 for OM124/124J/124JH/124S series tractor?
The 620MM right-hand knife 68120046 is an original or fully compatible mower deck cutting component designed for OM124, OM124J, OM124JH and OM124S series garden tractors. It is a massive steel blade with a length of 620 mm and a width of 55.5 mm, dedicated to work with an aluminum mowing unit. Proper blade profile and balance ensure stable operation, minimal vibration and very good grass shredding.
A central hole with a diameter of 16 mm and a side hole with a diameter of 6 mm, with a distance of 75 mm between them, make it possible to quickly and securely mount the blade on the shaft of the mower unit. The right-hand knife indicates the direction of operation and the way the cutting blades are turned up - it is designed for a specific side of the aggregate, so it is important to use the right model.
In practice, this is the component responsible not only for cutting, but also for lifting and ejecting the cut grass into the basket or into the rear/external ejection, depending on the design of the tractor. Properly shaped knife edges create a strong airstream that lifts the blades of grass and guarantees an even cut.
Application and installation location of the 620MM right-hand knife in OM124/124J/124JH/124S tractors
Right blade 620 mm 68120046 installs directly into the aluminum mower deck of OM124/124J/124JH/124S series tractors. This is the working element that works with the gearbox and drive shaft, responsible for the precise cutting of the grass at the set height. Proper seating of the blade-with respect for the direction of rotation and proper tightening of the mounting bolt-is crucial to the safe use and life of the entire cutting system.
Typical applications of the 620MM right-hand knife 68120046:
- Regular mowing of large home lawns - plots of several hundred to several thousand m², where even, fast and aesthetically pleasing mowing is important.
- Maintenance of green areas around companies and public facilities - Parking lots, company yards, playgrounds, squares, where the garden tractor works often and intensively.
- Work in orchards and recreational areas - mowing between rows of trees, near gazebos, in campgrounds or resorts.
The blade is designed for standard mowing conditions: dry or slightly damp grass, height adapted to the capabilities of the tractor. Thanks to its high-quality steel and properly prepared cutting edge, the blade can handle both fine, low turf and slightly taller grass in less regularly mowed areas.
Key advantages of 620MM right-hand knife 68120046 - quality, durability and safety
Choosing the right cutting blade for a garden tractor has a direct impact on the quality of the cut, the safety of the operation and the operating costs of the equipment. The 620MM right-hand knife 68120046 is distinguished by several key features that any user will appreciate:
- High-quality structural steel - the knife is made of durable material resistant to impacts with small stones, twigs or uneven terrain. This keeps its geometry longer and does not deform during operation.
- Precise balancing - properly balanced blade minimizes vibration of the entire mower deck, which translates into operator comfort (less vibration on the steering wheel and seat) and less wear on bearings and other drive components.
- Properly shaped cutting edge - The blade profile ensures efficient cutting and pick-up of grass blades, so the lawn is even after mowing, without jagged ends, which promotes healthy turf regrowth.
In everyday use, this means that the user can:
- mow faster and correct unmowed sections less often,
- reduce the risk of failures resulting from excessive vibration or improper balancing,
- maintain an aesthetically pleasing lawn with less time and effort.
Right knife 620MM for OM124/124J/124JH/124S aluminum unit - fit and compatibility
The 620MM right-hand knife 68120046 is designed specifically to work with the aluminum mowing unit in OM124/124J/124JH/124S series tractors. This means that its dimensions and hole layout are closely matched to the factory design of these models, ensuring trouble-free installation and proper operation.
Key technical parameters:
- Overall length: 620 mm
- Width: 55.5 mm
- Center hole diameter: 16 mm
- Side hole diameter: 6 mm
- Distance between holes: 75 mm
- Purpose: oM124/124J/124JH/124S series tractors - aluminum mower deck
- Direction: right-hand knife
The use of a blade with exactly these dimensions eliminates the problem of mismatch, mounting clearances or collision with the aggregate housing. This is especially important when the tractor is working frequently and intensively - every millimeter matters for safety and durability.
Examples of situations in which matching is critical:
- regular mowing on uneven terrain - proper attachment of the blade reduces the risk of it coming loose after hitting an obstacle,
- grass catcher operation - proper air circulation, generated by a properly shaped blade, ensures efficient filling of the catcher and minimizes clogging of the channels,
- mowing near curbs, fences and trees - a well-fitted blade cuts all the way to the edge of the working area, leaving no unsightly strips of uncut grass.
Why replace a worn-out knife with a new model 68120046?
The operation of a garden tractor causes each blade to dull, microcrack or deform over time. This results in poorer cut quality, greater strain on the engine and the entire drivetrain, and increased fuel or energy consumption. Replacing a worn blade with a new 620MM right-hand blade 68120046 restores the mower deck to full operation.
Benefits of the exchange:
- Better cut quality - the grass is evenly cut, without fraying or tearing out the blades, which has a positive effect on the health of the turf.
- Less load on the tractor - sharp, well-balanced blade requires less power to operate, making the motor and gearbox run lighter.
- Greater security - lack of cracks and deformation minimizes the risk of a blade fragment breaking off while mowing.
Examples of daily use:
- spring refreshment of the lawn after winter - a new blade will quickly clean up overgrown, weakened grass,
- regular mowing during the summer season - an even cut makes it easier to maintain a low, dense turf,
- preparation of the property for important events - such as family celebrations, outdoor events, corporate meetings.
How to properly operate and maintain the 620MM right-hand tractor blade?
In order for the 620MM right-hand knife 68120046 to serve for as long as possible, it is worthwhile to ensure proper operation and basic maintenance. This will ensure that you maintain high quality cutting and safe operation for many seasons to come.
- Regularly check the condition of the blade - before the season and every few mowings it is a good idea to inspect the cutting edge, check for any chips, cracks and the degree of dullness.
- Knife sharpening - if the edge is dull, it is recommended to professionally sharpen with the original angle of attack and rebalance the knife after the procedure.
- Maintenance of cleanliness - after finishing mowing, it's a good idea to remove grass and soil residue from the blade and the unit, which reduces corrosion and improves airflow during subsequent work.
In practice, by applying these principles, the user can extend the life of the blade while maintaining high quality mowing on large acreages, such as around single-family homes, residences, boarding houses or commercial buildings.
Technical data - 620MM right-hand knife for OM124/124J/124JH/124S tractor 68120046
| Overall length | 620 mm |
| Width | 55.5 mm |
| Central hole diameter | 16 mm |
| Side opening diameter | 6 mm |
| Distance between holes | 75 mm |
| Destination | OM124/124J/124JH/124S series garden tractors - aluminum mowing unit |
| Type | Right-hand knife |
| Product code | 68120046 |
FAQ - Frequently asked questions about 620MM right-hand knife 68120046
Question 1: Will the 620MM right-hand knife 68120046 fit my tractor?
The blade is designed for OM124, OM124J, OM124JH and OM124S series garden tractors equipped with an aluminum mower deck. Before buying, it is worth comparing the dimensions of the old blade (length 620 mm, width 55.5 mm, hole diameters 16 mm and 6 mm, distance between holes 75 mm) and the part number with the data in the tractor manual.
Question 2: Can I use this knife interchangeably with the left-hand knife?
Not. The right-hand blade has a different direction of blade shape and is designed for a specific side of the mower deck. Using it in place of the left-hand blade can cause improper grass ejection, excessive vibration and even damage to the unit. Always install the knife as intended (right/left).
Question 3: How often should the blade in the tractor be replaced?
Frequency of replacement depends on the intensity of use and operating conditions. With typical household use (a dozen or so mowings per season), the knife can serve for several seasons, provided that it is sharpened regularly and its condition checked. If you notice obvious chipping, cracks, severe deformation or a balancing problem - the knife should be replaced immediately.
Question 4: Is the new knife factory sharpened?
Yes, the knife is supplied with a prepared cutting edge, ready to use after proper installation. It is not recommended to additionally sharpen a new knife before first use - it is more important to make sure it is properly screwed and centered.
Question 5: How to safely replace the blade in the tractor?
Before proceeding with the replacement, you should:
- turn off the engine and disconnect the spark plug wire (or power on electric models),
- place the tractor on a stable surface,
- block the rotation of the knife (for example, with a wooden slat),
- unscrew the mounting screw, remembering the order of the washers and spacers,
- install the new right knife 620MM 68120046 in the same position, tightening the screw with the recommended torque.
After replacement, it is advisable to briefly test the operation on a small area to ensure that the unit operates evenly, without excessive vibration and noise.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.