ULTRASONIC SENSOR 67040043
- Ultrasonic sensor 67040043 Oleo-Mac for mowing robots - detects obstacles (10 cm wide., 15-20 cm high.), increases the safety of plants, children and animals, and reduces the need for a peripheral cable. Ideal for gardens with numerous dec
Ultrasonic sensor 67040043 for Oleo-Mac mowing robots - maximum safety and convenience in the garden
Ultrasonic (ultrasonic) sensor enables obstacle detection to enhance robot performance and safety. Detects obstacles 10 cm wide and 15-20 cm high in front of the machine.
Especially recommended for gardens with a lot of objects like flowers or shrubs.
An additional advantage will be the labor savings of installing the perimeter cable.
The sensor is an optional accessory for Oleo-Mac mowing robots. Below is an instructional video showing the easy installation and operation of the sensor-equipped mower.
What is the ultrasonic sensor 67040043 for Oleo-Mac mowing robots?
Ultrasonic sensor 67040043 is a state-of-the-art optional safety module for Oleo-Mac mowing robots. It uses ultrasonic waves to scan the space in front of the mower, so the robot "sees" obstacles before it reaches them and can safely avoid them. The device was designed specifically for users who expect the highest level of protection for ornamental plants, garden landscaping elements, and the safety of children and pets in the garden.
With precise distance measurement, the sensor detects obstacles as small as 10 cm wide and 15-20 cm high in front of the machine. This means that the mowing robot can effectively detect m.in. low pots, small shrubs, water bowls, decorative garden figures or trunks of young trees. The sensor actively "monitors" the mower's track and transmits information to its control unit, which automatically corrects the mowing route.
In practice, the ultrasonic sensor 67040043 becomes the electronic "sense of sight" of the Oleo-Mac robot - thanks to it, the device can work even more safely, intelligently and smoothly, without the risk of damage or unnecessary interruptions in mowing.
Where the Oleo-Mac ultrasonic sensor 67040043 is mounted and how the installation goes?
The ultrasonic sensor 67040043 is mounted on the housing of the Oleo-Mac mowing robot, in its front part, so that the ultrasonic heads have an unobstructed field of view. The manufacturer has provided special mounts that make installation quick and intuitive - without interfering with the design of the robot itself. In practice, this means that most users are able to install the sensor themselves, using simple pictorial instructions.
Installation usually involves firmly attaching the sensor bracket to the robot housing and connecting the cable to the appropriate socket on the control unit. The entire process is designed in a "plug & play" manner, which significantly reduces installation time. After installing the sensor, all you have to do is start the mowing robot - the system will automatically detect the new accessory and start using the data provided by the ultrasonic module.
In daily use, the sensor works completely unattended. No calibration or additional configuration required - just proper installation and regular cleaning of the housing from dust, grass and dirt to ensure full obstacle detection performance.
Application of ultrasonic sensor 67040043 in private gardens and green spaces
The ultrasonic sensor 67040043 was developed for gardens where standard mowing robot operation with a perimeter wire alone proves insufficient. It is perfect for irregularly shaped properties, with a large number of flower beds, ornamental shrubs, small trees, decorative elements and other obstacles that could be damaged during mowing.
Through the use of ultrasonic waves, the robot is able to react earlier to an emerging obstacle and change direction before physical contact occurs. This is ideal for owners of gardens full of valuable, delicate plants or show gardens, where every detail of the arrangement counts.
The sensor is used m.in.:
- in home gardens with dense plantings of shrubs and flowers,
- in recreational areas, where garden furniture or children's toys are frequently rearranged,
- on properties with numerous decorations - figurines, pots, solar lamps,
- in gardens with animals, where additional obstacle detection increases the overall safety of the mowing robot's operation.
Compared to the restraining wire alone, the ultrasonic sensor gives much more flexibility in the design and use of the garden. You can freely rearrange pots, lay out deck chairs or put up small pieces of landscaping - a robot with a sensor will definitely adapt better to the changing environment.
Oleo-Mac ultrasonic sensor 67040043 - key user benefits
When you choose the ultrasonic sensor 67040043 for your Oleo-Mac mowing robot, you gain a number of practical benefits that make a real difference in the comfort and safety of daily use:
- Greater security for the garden and surrounding area - obstacle detection with a width of 10 cm and a height of 15-20 cm allows you to effectively protect valuable plants, low shrubs, pots, water bowls and other elements of small garden architecture.
- Higher productivity of the mowing robot - thanks to earlier detection of obstacles, the robot stops less often and does not have to repeatedly try to avoid the same object. This translates into faster and more even mowing of the entire lawn area.
- Less need for extensive installation of perimeter cable - Ultrasonic sensor reduces the need for detailed "braiding" of each obstacle with a wire. This saves time and labor both in the initial installation and in any rearrangement of the garden.
- Comfort and full automation - once installed, the sensor works independently. You can forget about constantly supervising the work of the robot - the device itself will take care of avoiding obstacles and safely maneuvering between plants.
- Longer life of the mowing robot - fewer collisions with hard surrounding elements means less risk of damage to the housing, blades or suspension components. The sensor thus helps extend the trouble-free life of the robot.
In everyday use, this means that you can plan your watering, set up furniture or play with your children on the grass without worry, while the Oleo-Mac robot with ultrasonic sensor will do its job safely - without the risk of running into a water bowl, hitting a low pot or damaging plants you've just planted.
Quality, durability and reliability of ultrasonic sensor 67040043
Ultrasonic sensor 67040043 is designed for many years of intensive use in variable weather conditions. Robust housing and carefully selected materials provide high resistance to moisture, dirt and temperature changes that are inherent in the operation of garden equipment. The compact design makes the sensor blend harmoniously with the appearance of the mowing robot without disturbing its aesthetics or balance.
As an original accessory for Oleo-Mac mowing robots, the sensor is fully compatible with the device's electronic system. This ensures the user that all safety features are working as intended by the manufacturer. No need for additional programming or adapters translates into high reliability of the whole system.
The ultrasonic technology used is resistant to typical interference that can occur in a garden environment - such as wave reflections from uneven surfaces or changes in lighting conditions. Unlike simple mechanical bumpers, the sensor detects obstacles earlier before contact is made, significantly reducing the risk of accidental damage.
Key features of Oleo-Mac ultrasonic sensor 67040043 - summary
- Purpose: optional accessory for Oleo-Mac mowing robots.
- Function: obstacle detection to increase robot performance and safety.
- Detection range: obstacles with a width of approx. 10 cm and a height of 15-20 cm in front of the machine.
- Application: private gardens, recreational areas, properties with a lot of ornamental plants and decorations.
- Benefits: protection of plants and garden elements, higher mowing efficiency, less need for a perimeter wire around each obstacle.
- Installation: installation on the robot housing, easy and fast, without specialized tools.
- Maintenance-free operation: once installed, the sensor works automatically with the mowing robot.
- Designed for demanding users who value quality, precision and safety.
Additional product data
- Product name: ultrasonic sensor 67040043
- Type: ultrasonic (ultrasonic) sensor for mowing robot
- Compatibility: Oleo-Mac mowing robots (optional equipment)
- Manufacturer code / system code: 67040043
- EAN: 8026619110840
With a combination of advanced ultrasonic technology, clever design and full integration with Oleo-Mac mowing robots, the 67040043 sensor is the ideal solution for those who want to raise the standard of lawn care and enjoy maximum automated yet safe mower operation.
FAQ - frequently asked questions about the ultrasonic sensor 67040043
Question 1: For which mowing robots the ultrasonic sensor fits 67040043?
Ultrasonic sensor 67040043 is designed as an optional accessory for Oleo-Mac mowing robots. Before buying, it's a good idea to check in your model's manual to see if it supports mounting this type of accessory.
Question 2: Can I do the sensor installation myself?
Yes. The sensor is designed to be quick and intuitive to install. Just attach it to the robot housing and plug it into the appropriate socket. The instructional video and illustrations in the product documentation are helpful.
Question 3: What obstacles are detected by the ultrasonic sensor 67040043?
The sensor detects obstacles about 10 cm wide and 15-20 cm high in front of the machine. These may be m.in. pots, low shrubs, garden decorations, water bowls or other items standing on the lawn.
Question 4: Do I still need to use the perimeter cable after installing the sensor?
The perimeter wire still determines the robot's primary working area, but with the ultrasonic sensor, the detailed draping of each obstacle over the wire can be reduced. This saves time and gives you more flexibility in arranging your garden.
Question 5: Does the sensor require maintenance?
The sensor does not require complicated operation. It is recommended only to periodically clean the housing from dust, grass and other dirt to ensure uninterrupted operation of ultrasonic waves and full effectiveness of obstacle detection.
Question 6: Does the sensor affect the robot's runtime on a single charge?
The energy consumption of the ultrasonic sensor is small compared to the total energy consumption of the robot. In practice, its impact on operating time per charge is minimal, while the benefits in terms of better navigation and fewer collisions are far greater.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.