460MM BLADE FOR G48PE /G48TE SERIES MOWER 66130045R
- Blade 460mm for mower G48PE / G48TE 66130045R - original, hardened blade with a length of 460 mm, perfectly balanced, with a central hole of 20 mm and side holes of 10 mm, guarantees a clean cut of the lawn and less strain on the engine.
460 mm blade for G48PE / G48TE 66130045R series mower is a high quality, original working blade designed for G48 series electric and petrol mowers. It is designed to provide maximum mowing performance, even grass cutting and long, trouble-free operation of the machine. It's the ideal choice for users looking for reliability, safety and a perfect result on the lawn - both in home gardens and larger green spaces.
length: 460 mm, width: 50 mm, Ø center hole 20 mm, Ø side hole 10 mm, distance between holes 52 mm; for mower series G48PE
Often, a worn or chipped blade is the main cause of uneven mowing, fraying blades and excessive vibration of the mower. Replacing the blade with a new one dedicated to your G48PE / G48TE model instantly improves comfort, reduces mowing time and produces a dense, healthy lawn without discoloration at the grass tips.
460mm blade for G48PE / G48TE series mower 66130045R - perfect fit and safe installation
The 460mm blade for the G48PE / G48TE 66130045R series mower is designed to be fully compatible with the G48 series mowers. Precise mounting dimensions ensure that the blade is securely seated on the mower shaft, which minimizes vibration and increases user safety.
- Blade length 460 mm - Provides optimum working width, allowing efficient mowing of medium and larger lawn areas. This reduces your work time and makes fewer trips, which is important for regular garden maintenance.
- Width 50 mm - adequate blade width ensures stability and rigidity, while maintaining the proper aerodynamic profile needed for efficient lifting and grass ejection into the trash or for rear ejection.
- Mounting holes to match the G48 series - a central hole with a diameter of 20 mm and side holes with a diameter of 10 mm, with a distance between them of 52 mm, allow quick and secure installation in the original handle of the mower, without the need for modifications or additional adapters.
In practice, this means that when properly installed, the knife is stable, does not "throb" and does not cause unnecessary stress on the engine. The user can make full use of the mower's power, achieving an even cut line across the entire working width.
The product installs directly on the shaft of the G48PE / G48TE series mower, in place of a worn or damaged blade. Regular replacement of the blade is especially important when the mower works in more difficult conditions - in areas with uneven ground, stones or roots that can cause chipping and deformation of the cutting edge.
Durable steel, excellent sharpness - the durability of the 460mm G48PE / G48TE knife in daily use
The 460mm blade for the G48PE / G48TE 66130045R mower is made of high quality, hardened steel, which guarantees resistance to abrasion and mechanical damage. The right hardness of the material makes the blade stay sharp for a long time, while being flexible enough not to break when accidentally hitting small obstacles.
- Hardened structural steel - provides high wear resistance, making the knife suitable for multi-season gardening work. Even with frequent mowing, the blade only needs periodic sharpening instead of constant replacement.
- Optimized cutting edge profile - Factory sharpened edge gives a clean, even cut. The grass is not ragged, but cut, which translates into better condition, reduced tip drying and less risk of fungal diseases.
- Impact resistance - the design of the blade and the appropriate thickness of the steel minimize the risk of serious damage when coming into contact with small stones, cones or twigs, often found on lawns.
In everyday use, this means that the user can mow even dense and slightly taller grass without worry, without the risk of the blade becoming dull after a few passes. In a home garden, this translates into less frequent service interruptions, and on larger sites, real savings in time and operating costs.
Regular sharpening of the knife is easy - thanks to its simple shape and clearly marked cutting edge, it can be done in a home workshop or in a professional service center. With proper maintenance, one blade can last for many seasons.
Application of the 460mm blade 66130045R - perfect lawn mowing on G48PE / G48TE mowers
The 460mm blade for the G48PE / G48TE 66130045R series lawn mower is primarily designed for standard lawn mowing around the house, on recreational plots and small commercial areas. Thanks to its refined geometry and proper balance, it will work well for both frequent and periodic mowing.
- Home gardens - ideal for lawn care in front of the house, around the terrace or garden paths. Provides clean mowing and aesthetically pleasing turf, which is important when you want a presentable home environment.
- Recreational plots - will cope well with grass, which is sometimes a bit taller and denser, on ROD or summer plots. Adequate blade length allows you to quickly bring the area up to scratch after a prolonged period of mowing.
- Smaller company sites - it can be used for regular lawn care at offices, stores or service points, where neat appearance of the surroundings and reliable operation of equipment counts.
The knife also works well where the user requires repeatable results - consistent height and quality of cut. Thanks to the appropriate shape of the blades, the blade not only cuts, but also effectively lifts the blades of grass, which increases the uniformity of mowing even on gently uneven ground.
How and where to install the 460mm blade for the G48PE / G48TE 66130045R mower?
Blade 460mm 66130045R is mounted directly on the drive shaft of the mower, in the central part of the working body. Thanks to the precision-matched mounting holes, the replacement is quick and the blade itself is perfectly centered.
- Center hole Ø 20 mm - is used to seat the blade on the mower shaft. This is the main attachment point on which the stability of rotation, lack of runout and minimal vibration during operation depend.
- Side holes Ø 10 mm with 52 mm spacing - are used for additional screwing of the blade with screws or pressure plates, in accordance with the solution used in the particular model of mower G48PE / G48TE. Provide a secure and safe attachment.
- Cooperation with original accessories - The blade is engineered to work perfectly with the factory disc, transmission and guards. In this way, you do not change the operating characteristics of the mower, but only restore its original efficiency.
Before installation, always disconnect the mower from the power supply (for electric models) or remove the spark plug pipe (for internal combustion models) to eliminate the risk of accidentally starting the engine. Then the old mounting bolt is unscrewed, the used blade is removed and a new one is installed in the same place, making sure that the blade is properly aligned according to the direction of rotation.
In everyday use, replacing the blade is a simple service that significantly improves your mowing experience - you'll especially feel it if your existing blade is already dulled or damaged. New blade means less vibration, quieter operation and more evenly cut turf.
Benefits of replacing with a new 460mm blade G48PE / G48TE - better mowing effect and longer life of the mower
Replacing the blade with a new item dedicated to your G48PE / G48TE mower is an investment that pays for itself very quickly. Not only do you gain a better looking lawn, but you also realistically extend the life of the entire unit.
- Improved cut quality and lawn appearance - sharp, properly shaped blade ensures even trimming of stalks. After mowing, the lawn looks denser, takes on a healthy color, and the edges are aesthetically trimmed - no frayed ends.
- Less strain on the engine - A worn blade with chipped edges requires more effort from the engine to collect and cut the grass. The new blade cuts grass without resistance, so the engine runs lighter, uses less energy or fuel, and is less likely to overheat.
- Vibration and noise reduction - The balanced, straight 460mm blade reduces vibration on the mower's handles, resulting in greater comfort, especially during longer mowing sessions. At the same time, the mower can run quieter and smoother.
In practice, when we mow regularly - every week or every two weeks during the season - the difference between a used and a new knife is very clear. The mower drives lightly, does not "jerk" the grass, and the final effect is visible after just one pass. This is an easy way to restore the full capabilities of your equipment without having to buy a new mower.
Technical specifications of 460mm blade for G48PE / G48TE series mower 66130045R
Below is a summary of the most important technical parameters that will make it easier to check compatibility with your mower:
- Purpose: blade for mower series G48PE / G48TE
- Overall length: 460 mm
- Width: 50 mm
- Center hole: Ø 20 mm
- Side openings: Ø 10 mm
- Spacing of side openings: 52 mm
- Material: hardened steel
- Color: black
- Product code / symbol: 66130045R
Before you order a blade, it's a good idea to compare the above parameters with the data in your mower's manual or check the markings on your old blade. This will give you the assurance that the new component will be fully compatible - which is crucial for the safety and proper operation of the device.
FAQ - the most frequently asked questions about the 460mm blade for the G48PE / G48TE 66130045R series mower
1. Does this blade fit all G48 series mowers?
The 460mm 66130045R blade is designed for G48PE / G48TE series mowers. In most cases, it will fit all models in the series, but before buying it is worth comparing the dimensions of the holes and the length of the blade with the manufacturer's data or a disassembled knife.
2. How often should you replace the blade on your lawn mower?
Frequency of replacement depends on the intensity of use and operating conditions. With home use, with regular sharpening, the knife can last for several seasons. Replacement is necessary when the blade is visibly chipped, deformed or can no longer be properly balanced after sharpening.
3. Is the knife sharpened at the factory?
Yes, the knife is supplied with a factory cutting edge, ready to use immediately after installation. However, before using it for the first time, always make sure it is properly attached and tightened according to the mower manufacturer's recommendations.
4. Can I install a new blade on the mower myself?
Yes, you can install the blade yourself, as long as you follow basic safety precautions - disconnect the mower from the power supply or remove the pipe from the candle, immobilize the blade to loosen and turn the screws, and install the blade according to the direction of rotation. When in doubt, it's a good idea to get help from the service.
5. How to take care of a 460mm knife to make it last as long as possible?
After you finish mowing, it's a good idea to clean the blade of grass and soil, then store the mower in a dry place. From time to time, check the condition of the cutting edge and sharpen the blade if necessary, while taking care to maintain proper balance. Avoid mowing stones, thick branches and other hard objects that can damage stal.
6. What does it take to replace an old, worn-out knife with a new one?
The new blade is all about better mowing quality, less strain on the engine, less vibration and quieter mower operation. The lawn looks more even, is healthier, and the work itself becomes faster and more convenient. This is one of the easiest and most effective ways to refresh a used mower.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.