410MM BLADE FOR G44PE SERIES MOWER 66120026R
- Original 410mm blade for G44PE 66120026R series electric lawn mower. Made of durable steel, it provides precise cutting, less vibration, engine protection and a perfect lawn appearance. Ideal as a spare part.
410MM BLADE FOR G44PE SERIES MOWER 66120026R - PROFESSIONAL LAWN CUTTING AND RELIABLE PERFORMANCE
410mm blade for G44PE series mower
The 410mm blade for G44PE 66120026R series mower is a high quality work piece designed for G44PE series electric mowers. It is the blade that is the heart of any lawn mower - it is responsible for precise cutting, even grass height and the aesthetic appearance of the entire lawn. Original, well-balanced blade with a length of 410 mm ensures stable operation of the device, minimizes vibration, protects the engine and allows you to achieve a perfect mowing line on small and medium-sized home green spaces.
The blade is mounted directly on the working shaft of the G44PE series mower, at the bottom of the machine, under the working body. Mounting holes in the center of the blade allow it to be securely and accurately attached to the hub, ensuring safe use. This is ideal for those who want to restore their lawn mower to full performance after the factory blade has been damaged, or plan to replace the blade regularly as part of proper equipment maintenance.
Applications of the 410mm G44PE blade include mowing of home lawns, allotments, areas around single-family houses, as well as small green areas around businesses and service buildings. Thanks to the appropriate profile of the cutting edge and contoured tips, the blade not only cuts the grass, but also promotes its lifting and efficient transport to the mower basket (if used), resulting in a clean, even and neat appearance of the surface after one pass.
G44PE 66120026R lawn mower blade - precise lawn cutting thanks to its 410 mm length
The 410mm length was ideally suited to the design of the G44PE series mowers. This allows the blade to cover the optimal working width of the machine, which means that a larger area of lawn is mowed in one pass. For the user, this translates into shorter working hours, less energy consumption and more convenient garden maintenance - especially with regular mowing every few days.
Precisely shaped cutting edge guarantees an even and clean cutting result. Instead of tugging the blades of grass, the knife cuts them off precisely, reducing the risk of yellowing tips and drying out the turf. This is a key aspect for those who care about a healthy, dense, intensely green lawn that serves as a showcase for a home or business. Regular use of a sharp matching blade visibly improves the appearance of the lawn after just a few mowings.
Examples of daily applications:
- regular mowing of a home lawn of 300-600 m², where quick results and even grass height are important,
- care of small decorative gardens, where it is important to treat gently the turf surrounding flower beds, shrubs and paths,
- maintenance of a presentable lawn at the office, service showroom or guesthouse, where the aesthetics of the surroundings affect the perception of the company by customers.
Durable steel and solid workmanship - durability of 410mm blade for G44PE series mowers
The 410mm blade for G44PE 66120026R series mower is made of hard, wear-resistant steel. Properly selected material thickness and factory heat treatment guarantee high resistance to impact on small stones, twigs or uneven ground that may occur during daily mowing. Thus, it is not necessary to replace the blade after each season, and the user can enjoy high quality cutting for a long time.
Robust workmanship and properly shaped tips contribute to even weight distribution of the knife. This reduces the vibration and load transferred to the mower's engine, as well as to the handle that the operator is holding. In practice, this means greater comfort, especially when mowing for longer periods - hands get less tired, and the device runs quieter and more stable. A well-balanced blade also means less risk of damage to bearings and drive components.
Examples of daily use of the knife's durability:
- mowing the lawn after heavy rainfall, when there may be small twigs or cones carried by the wind in the grass,
- regular mowing of a recreational plot, where tougher weeds happen - a sturdy knife can cope with them better than a worn blade,
- seasonal cleaning work around the house in autumn or spring, when unseen obstacles hide under the grass, and the user expects the mower to work without failure.
Easy installation of 410mm G44PE 66120026R blade and safe operation of the mower
The centrally located mounting holes in the 410mm blade for the G44PE 66120026R series mower allow it to be quickly and seamlessly attached to the original mower hub. Simply unplug the device from the power supply, lay it on its side, unscrew the worn blade, and then install a new one in its place, paying attention to the correct direction of rotation and proper tightening of the screw. By fitting into the G44PE series, there is no need for additional modifications or adjustments.
A properly installed blade increases the safety level of working with the mower. Stable mounting and proper balance minimize the risk of the component coming loose during mowing, thereby protecting the user from dangerous situations. In addition, thanks to sharp cutting edges, the device consumes less energy during operation - the engine is not overloaded and the mower does not have to be driven with excessive force.
Examples of the practical benefits of easy installation:
- quickly replace the blade yourself before the mowing season, without having to return the mower to service,
- replacing a damaged blade after accidentally stepping on a larger stone - reducing downtime at work,
- the possibility of having a spare blade that can be installed immediately if the working edge becomes blunt or chipped.
Use of the 410mm 66120026R knife in daily garden maintenance
The 410mm blade for the G44PE 66120026R series lawn mower will prove useful wherever it is necessary to keep the turf at a constant height on a regular basis. It can be successfully used both by owners of single-family houses and by those who take care of greenery on corporate premises. Thanks to its compatibility with the G44PE series, it is an ideal choice as a spare part for periodic inspections or post-warranty repairs of the device.
Application in practice:
- regular mowing of the lawn every 5-7 days during the growing season to maintain an even turf height without jagged ends,
- care of recreational areas - playground, garden with gazebo, barbecue area, where guests move barefoot on soft grass,
- maintaining order on lawns at entrances, driveways, garden paths and along fences, where you can especially see the difference between a sharp and a worn knife.
Why replace the blade on your G44PE mower with the original 410mm model 66120026R?
The use of the original 410mm 66120026R blade for G44PE series mowers guarantees full compatibility with the design of the machine. The length, shape and spacing of the mounting holes have been designed specifically for this series of mowers, which translates into reliability and safe operation. Unlike universal replacements, there is no risk of collision with the housing or improper operation of the grass ejection mechanism.
Replacing a worn or damaged blade with an original model allows you to take full advantage of the technical parameters of the mower, such as engine power or the system of collecting grass into a basket. A well-chosen blade also improves the comfort of the operator - the mower drives lightly, does not "jerk" and does not require multiple passes over the same parts of the lawn.
Benefits of using the original knife:
- confidence of fit and simple installation without alterations,
- longer life of the mower by reducing vibration and engine overload,
- constant high quality of cutting - important for both private users and professionals taking care of green areas.
Basic technical information - 410MM blade for G44PE series mower 66120026R
- Purpose: G44PE series electric mowers,
- Total length of the knife: 410 mm,
- Material: high strength steel,
- Working element: grass cutting blade with contoured tips,
- Product code / manufacturer designation: 66120026R,
- Installation site: the working shaft (blade hub) at the bottom of the mower,
- Application: mowing and maintenance of lawns at home, allotments and at businesses.
FAQ - Frequently asked questions about the 410mm blade for the G44PE 66120026R series mower
Question 1: Will this blade fit any mower with a working width of about 41 cm?
Answer: The 410mm 66120026R blade is primarily designed for G44PE series mowers. On other models with similar mowing width, it may not fit due to different mounting hole spacing or hub design. Before you buy, it's a good idea to compare the blade markings and specifications of the mower.
Question 2: How often should you replace the blade on your lawn mower??
Answer: The frequency of replacement depends on the intensity of use and operating conditions. When typically mowing a home lawn, it is recommended to check the condition of the cutting edge at least once a season. If the blade is badly dulled, chipped or deformed after hitting an obstacle, it is best to replace it with a new one to maintain high cutting quality and safe operation.
Question 3: Can the 410mm G44PE knife be self-sharpened?
Answer: Yes, the knife can be sharpened carefully, remembering to keep the original sharpening angle and to grind both edges evenly, so as not to disturb the balance. However, if the blade is badly damaged or worn, it is safer to replace it with a new, original 66120026R blade.
Question 4: How to safely replace the blade on the G44PE series mower?
Answer: Disconnect the mower from the power source before starting work. Then lay the device on its side, secure it against accidental tipping and, holding the knife with a wooden block or thick glove, unscrew the mounting screw. After removing the old knife, we put on the new one in the same direction, tighten the screw according to the manufacturer's recommendations and make sure that the item is firmly fixed.
Question 5: What are the signs of wear or damage to the knife?
Answer: The most common symptoms are jagged grass tips after mowing, noticeable vibration of the mower, louder operation of the machine, and visible chipping or bending of the blade. If you notice any of these phenomena, it is worth inspecting the condition of the 410mm 66120026R blade and replacing it if necessary, so as not to damage the engine and deteriorate the appearance of the lawn.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.