BELT GUARD GV 44TK / G 44TK 66100288
- GV 44TK / G 44TK BELT GUARD 66100288 - original, heavy-duty belt and pulley guard for GV 44TK and G 44TK compactors. Increases operational safety, protects the drive from damage, dust and moisture. Ideal for paving and construction companies
BELT PROTECTION GV 44TK / G 44TK 66100288 - professional protection of the drive belt and pulleys in compactors
BELT GUARD GV 44TK / G 44TK 66100288 is a high-quality protective element designed for compactors with the designations GV 44TK and G 44TK. Protects the V-belt and pulleys from mechanical damage, dirt and moisture, which directly translates into operator safety and longer life of the entire machine drive.
GV 44TK / G 44TK wheel belt guard
Made of durable engineering plastic, the guard is resistant to stone impact, contact with sand, construction dust, and typical site operating conditions. Specially shaped geometry ensures stable installation and effective removal of debris outside the drive belt's working area.
What is and what is the GV 44TK / G 44TK belt guard used for 66100288?
Belt guard GV 44TK / G 44TK 66100288 is a dedicated, original part of the drive zone installation in plate compactors with the symbols GV 44TK and G 44TK. Its main task is:
- Operator safety - Physical separation of moving drive components (belt, pulleys) from the operator and other people in the vicinity of the machine.
- V-belt protection - Limit belt contact with sharp stones, debris, sand, mud and water that could accelerate wear or lead to belt breakage.
- Stable operation of the machine - thanks to drive protection, the risk of sudden breakdowns, downtime and a decrease in compactor performance during intensive construction tasks is reduced.
In practice, this means that a well-chosen and efficient belt guard is a key element in keeping a compactor in full working order - both on small home projects and on large construction sites when laying paving stones, compacting foundation layers or preparing the ground for foundations.
GV 44TK / G 44TK belt guard assembly 66100288 - quick replacement and perfect fit
The belt guard is designed specifically for models GV 44TK and G 44TK, so that its installation is intuitive and does not require specialized tools. The structure has properly shaped surfaces and mounting holes that allow:
- Precise seating on the frame of the compactor - the cover fits snugly against the drive housing, eliminating play and vibration that could cause noise or accelerated wear and tear.
- Maintaining the correct drive geometry - its shape does not interfere with the operation of the belt or pulleys, ensuring constant tension and optimal torque transmission.
- Easy service access - if the belt needs to be inspected or replaced, the guard can be quickly removed, serviced and then reinstalled without risk of damage.
In daily use of the compactor, replacing a damaged belt guard GV 44TK / G 44TK 66100288 usually takes a few minutes, and proper installation immediately improves comfort and safety - especially when the machine is used near pedestrians, fences, walls, terraces or building facades.
Use of belt guard GV 44TK / G 44TK 66100288 in daily operations
The belt guard is used in all work performed with GV 44TK / G 44TK compactors, in particular:
- Construction and upgrading of driveways and paved sidewalks - Protects the drive from the intense cement dust, sand and small pebbles created during the cutting of the pavers.
- Substrate preparation for foundations, screeds, terrace slabs - protects the belt and pulleys when compacting layers of aggregate, ballast or sand ballast.
- Work on access roads, maneuvering areas and parking lots - Reduces the risk of damage to the drivetrain in harsh conditions with sharp stones, asphalt residue or debris fragments on the ground.
By using this cover, you increase the reliability of your compactor, reduce downtime due to belt failures, and raise the safety standard when completing jobs for residential and business customers.
Durability, quality and reliability of the GV 44TK / G 44TK belt guard 66100288
The belt guard is made of strong, impact-resistant engineering plastic, optimized for construction conditions. Its design guarantees:
- Resistance to mechanical damage - wall thickness and internal stiffening ribs effectively cushion accidental impacts from stones, tools or structural elements.
- Resistant to dust, dirt and moisture - the surface of the plastic does not absorb water, is easy to clean and does not corrode, which increases the life of the entire drive structure.
- Dimensional stability - the shield retains its shape and parameters even with many hours of operation of the device and changing ambient temperatures.
For the user, this means multi-season operation without the need to frequently replace the cover. When you invest in an original GV 44TK / G 44TK belt guard 66100288, you are assured that the component is designed for the real-world loads encountered during soil compaction and paving work.
Why choose the original GV 44TK / G 44TK belt guard 66100288?
Choosing an original belt guard dedicated to specific models of compactors is crucial for trouble-free operation of the equipment. Original product with code 66100288 provides:
- Full dimensional compatibility - No reworking, cutting or fitting, which could weaken the structure or cause the drive to malfunction.
- Hassle-free service - model and part code designation facilitates identification in technical documentation and when ordering subsequent consumable components.
- High standard of security - the original protective components are designed to meet the health and safety requirements and standards of the compactor manufacturer.
In day-to-day use, this means less risk of unplanned breakdowns, safer working conditions for the operator, and the ability to seamlessly provide paving, construction or finishing services without delays or complaints from customers.
Parameters and performance features of the belt guard GV 44TK / G 44TK 66100288 - summary
- Purpose: belt and pulley guard for GV 44TK / G 44TK compactors.
- Function: v-belt and pulley protection, increase operator safety.
- Material: durable construction material resistant to impact and construction conditions.
- Color: black - aesthetically pleasing and practical, masking operational dirt.
- Mounting type: fits factory mounting points on GV 44TK / G 44TK compactors.
- Part code: 66100288 - facilitates clear product identification.
These features make the GV 44TK / G 44TK belt guard 66100288 an ideal choice for both paving and construction companies, as well as for individual users who want reliability, safety and long equipment life.
FAQ - frequently asked questions about the GV 44TK / G 44TK belt guard 66100288
Question 1: Does the belt guard GV 44TK / G 44TK 66100288 fit other models of compactors?
The cover was designed primarily for compactors with the designations GV 44TK and G 44TK. Using it on other models may require modifications, which is not recommended and may reduce safety levels. For full compatibility, it is always a good idea to choose parts dedicated to a specific model of the device.
Question 2: How often should you replace the belt guard on the compactor?
The belt guard is not a typical fast-wearing component, but it should be inspected regularly. Replacement is recommended in case of visible cracks, scratches that weaken the structure, missing pieces of plastic or deformations that may affect the safety and protection of the belt. With heavy use, it is a good idea to do a visual inspection every few weeks.
Question 3: Can the installation of the belt guard be done by yourself?
Yes, the installation of the belt guard GV 44TK / G 44TK 66100288 is simple and can be done by yourself by a user who knows the basic operation of the compactor. Simply unscrew the worn or damaged cover, clean the mounting location and screw the new part into the factory mounting points. For safety, always perform these operations with the engine off and the ignition disconnected.
Question 4: How to take care of the belt guard to make it last as long as possible?
When you're done, it's a good idea to remove accumulated sand, mud and stones from the cover, and wash it with water if necessary. Avoid hitting the guard directly with a hammer or other hard tools. Regular cleaning and inspection of the visual condition will allow you to use the shield for many seasons without losing its protective properties.
Question 5: What are the benefits of replacing a damaged shield with a new one?
The new undamaged belt guard is, above all, more safety for the operator, more effective protection of the V-belt, less risk of failure and downtime in operation. In addition, a well-maintained, complete compactor looks more professional in the eyes of customers, which can positively affect the image of your company.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.