BLADE 510MM FOR MAX53 SERIES MOWER 66060413R
- Knife 510mm for MAX53 series mower 66060413R - original balanced hardened steel blade. Guarantees an even cut, better airflow and safe operation of the MAX53 mower. An ideal replacement.
510MM BLADE FOR MAX53 SERIES MOWER 66060413R - PROFESSIONAL GRASS CUTTING AND SECURE FIT
The 510mm blade for MAX53 series mower 66060413R is a high-quality cutting element designed for MAX53 series mowers. Made of durable steel, ensures precise mowing, long life and safe operation. Thanks to carefully selected dimensions and arrangement of mounting holes, it perfectly fits the indicated models of lawn mowers, ensuring stable installation and optimal operation of the device in any garden conditions.
Manufacturer's description / catalog data: length: 510 mm, width: 55 mm, Ø central hole 20 mm, Ø side hole 8.5 mm, distance between holes 65 mm; for MAX53 series mowers.
What is the 510mm blade for the MAX53 66060413R series mower and why it is so important?
KNIFE 510MM FOR MAX53 SERIES MOWER 66060413R is a factory-fitted working element of the lawn mower responsible for cutting grass and properly producing airflow inside the body of the machine. Its job is not only to physically cut the stalks, but also to lift them and direct them into the basket or for side discharge, depending on the design of the mower.
In practice, this means that a properly selected knife has a huge impact:
- the quality and uniformity of lawn cutting,
- work efficiency - with a sharp blade, mowing is faster,
- engine load and fuel or electricity consumption,
- user safety - proper installation and balancing reduce the risk of vibration and damage.
By replacing a worn, chipped or crooked blade with a new 510mm model dedicated to the MAX53 series, you can refresh your mower's capabilities and restore its factory performance. This is one of the most effective upgrades you can do on your own in minutes.
Where the 510mm blade for the MAX53 series mower 66060413R is mounted?
Knife 510mm for MAX53 series mower 66060413R is mounted on the working shaft (axle) at the bottom of the mower, directly under the cutting body. A central hole with a diameter of 20 mm and two side holes with a diameter of 8.5 mm, 65 mm apart, allow the knife to be securely screwed in place using the original screws and spacers provided by the manufacturer.
Proper installation includes:
- remove the mower guard and lock the blade to avoid accidental rotation,
- unscrewing the old knife and thoroughly cleaning the contact surface with the shaft,
- insert the new knife with the cutting side facing the right way (according to the markings on the blade),
- tightening the mounting bolts with the appropriate force, according to the recommendations of the manufacturer of the mower.
Examples of practical applications:
- Domestic lawn next to a single-family house - quick replacement of the blade after winter before the first mowing makes it possible to achieve an even, aesthetic cut without frayed tips.
- Allotment and recreational gardens - the new blade reduces the risk of leaving uncut clumps, which is particularly important in representative areas.
- Professional care of green areas - Service technicians and gardeners install the new blade on MAX53 series mowers to maintain quality mowing on larger areas, such as at businesses and sports facilities.
Use of 510mm blade for MAX53 mower - ideal for heavy use
The 510mm blade for the MAX53 series mower 66060413R is designed for daily mowing during the season. It works well on both smaller home lawns and larger green spaces where the mower works many hours a week. The use of properly selected steel and the balance of the blade allows the blade to maintain stable rotation, reduce vibration and improve user comfort.
Example areas of use:
- Regular mowing once a week - for standard lawn care, the blade provides a fast and clean cut, reducing working time and fuel consumption due to lower resistance.
- Cleaning up a neglected lawn - replacing an old, dull blade before mowing for the first time after a long break makes it easier to deal with taller, dense grass.
- Intensive commercial operation - in gardening companies, where mowers operate almost daily, the 510 mm blade is replaced periodically to ensure repeatable quality and reduce the risk of failure due to strong vibrations.
Thanks to its precisely defined dimensions (length 510 mm, width 55 mm), the blade works perfectly with the cutting body of MAX53 mowers, ensuring proper coverage of the working width and optimal airflow necessary for efficient collection of grass clippings into the garbage can.
KNIFE 510MM FOR MAX53 SERIES MOWER 66060413R - durability, safety and comfort of use
One of the key features of the 510mm blade for the MAX53 series mower 66060413R is its durability and wear resistance. Made of high quality steel, it provides resistance to impacts with small stones or twigs, which often occur during mowing operations. Suitable thickness of material and thoughtful shape of cutting edge allow repeated sharpening without losing working properties.
Work safety is enhanced by:
- precisely made mounting holes - The central 20mm and lateral 8.5mm provide stable attachment without backlash,
- proper balance of the knife - reduces the transmission of vibrations to the mower housing and the operator's handle,
- adaptation to MAX53 series specifications - Reduces the risk of using non-original, randomly selected cutting elements.
From the user's point of view, the most important benefits are:
- an evenly mowed lawn without "clumps" or frayed leaves,
- less operator fatigue due to lower vibration and noise levels,
- less frequent need for replacement - with regular sharpening the knife serves for many seasons.
An example from daily practice: the owner of a garden of 800-1000 m², mowing the lawn once a week, after replacing with a new 510mm blade for the MAX53 series usually feels a marked improvement in the quality of the cut already on the first pass - the grass is cut more evenly, and the mower does not "choke" even with slightly taller vegetation.
Technical specifications of 510mm blade for MAX53 series mower 66060413R
- Overall length: 510 mm
- Width: 55 mm
- Center hole diameter: 20 mm
- Diameter of side holes: 8.5 mm
- Distance between side openings: 65 mm
- Purpose: mAX53 series mowers
- Material: hardened steel (multiple sharpening cutting element)
Carefully selected technical parameters make the 510mm blade for MAX53 66060413R lawn mower an ideal replacement for a worn out cutting element. Precision manufacturing avoids installation problems, and matching dimensions ensure compatibility with original lawnmower attachments.
How to take care of the 510mm blade for the MAX53 lawnmower so that it will serve for years to come?
To get the most out of the potential of the 510mm blade for the MAX53 series mower 66060413R, it is worth remembering some basic rules of operation and maintenance. With regular maintenance and proper storage, the blade maintains its sharpness and edge geometry, which translates into mowing quality and safe operation.
- Systematic sharpening - with frequent mowing, it is recommended to sharpen the blade every few weeks, or at least once a season. Sharpen symmetrically on both sides, maintaining the factory angle of attack.
- Balance control - after sharpening, it is a good idea to check the balance of the knife to avoid excessive vibration, which can damage the bearings and reduce the comfort of work.
- Cleaning up after mowing - removing grass and soil residue after each use prevents corrosion and adherence of dirt, which can weaken the material over time.
Everyday practical examples:
- after finishing mowing, the homeowner lifts the mower, gently cleans the blade with a brush and checks for deep nicks,
- before the start of the gardening season, the user disassembles the 510mm MAX53 knife, gives it to a service center for sharpening, or performs this operation on its own on a vise,
- after noticing stronger vibrations during operation, the gardener checks the attachment and the condition of the blade - if it is clearly bent, replace it with a new one to protect the engine and the body of the mower.
FAQ - Frequently asked questions about the 510mm blade for the MAX53 series mower 66060413R
1. Does the 510mm blade 66060413R fit all MAX53 mowers?
The blade was designed for MAX53 series mowers. In most cases, it will fit all models in the series, but it is always a good idea to compare the length, diameter of the center hole and spacing of the side holes with the specifications of a particular mower before you buy it.
2. How often should I replace the blade on my mower?
Frequency of replacement depends on the intensity of use and operating conditions. With regular sharpening and proper use, the 510mm blade for MAX53 mowers can last for several seasons. Replacement should be considered when deep chips, cracks, deformations appear, or the correct balance can no longer be maintained.
3. Is the new knife sharpened at the factory?
Yes, the knife is supplied with a prepared cutting edge suitable for first assembly. After prolonged use, it is recommended to sharpen it yourself or use a professional service to refresh the sharpness and extend the life of the product.
4. Can I replace the 510mm blade on the MAX53 mower myself?
Yes, replacing the blade is a simple service that most users do themselves. It is imperative to disconnect the power supply (in the case of electric or battery-powered mowers) or remove the ignition wire from the spark plug on internal combustion mowers, and then use the appropriate tools and follow the operating instructions of the machine.
5. What to do with a worn knife after replacement?
Return the used knife to a steel scrap collection point or to your local PSZOK (Selective Municipal Waste Collection Point). This way it will be recycled and you will take care of the environment.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.