325MM BLADE FOR K35 SERIES MOWER 66050018CR
- 325mm blade for K35 series mower 66050018CR - durable, hardened cutting blade for precise, even lawn mowing. Ideally suited for K35 mowers, reduces vibration, protects the drive and extends the life of the machine.
What is 325MM blade for K35 series mower 66050018CR?
K35 SERIES MOWER BLADE 325MM 66050018CR is a high quality work piece designed for K35 series garden mowers. It is responsible for precise grass cutting, even finishing of the lawn surface and safe and stable operation of the machine. Made of durable, hardened steel, it ensures a long service life and resistance to damage from contact with uneven surfaces.
Where the 325MM blade for the K35 series mower 66050018CR is mounted?
The blade is mounted on the working shaft of the mower at the bottom of the machine, directly under the cutting body housing. The central mounting hole and side locating holes match the mounting system used on K35 series mowers. Thanks to the appropriate dimensions and hole spacing, replacing a worn knife with a new one is quick and hassle-free, and when properly installed, the knife works stably, without vibration or excessive noise.
Application of 325MM blade for K35 series mower 66050018CR
The blade is designed for mowing home lawns, recreational plots, gardens at companies and green areas around public buildings. Particularly well suited for use wherever an even, aesthetic cut and repeatable work results are expected. With a compact length of 325 mm, it is ideal for mowers with smaller working widths, providing convenient maneuvering between flower beds, trees and other obstacles.
Manufacturer's description / catalog data:
length: 325 mm, width: 45 mm, Ø central hole 20.5 mm, Ø side hole 10.5 mm, distance between holes 52 mm; for K35 series mowers
Precision fit 325mm blade for K35 series mowers - safety and comfort
The 325MM blade for the K35 series mower 66050018CR is designed specifically for machines in this series, which means a perfect fit for the factory mounting system. The right dimensions - 325 mm in length and 45 mm in width - guarantee the right working width, while maintaining the right balance of the mower during operation.
The central mounting hole with a diameter of 20.5 mm and the side holes of 10.5 mm with a spacing of 52 mm allow the blade to be screwed securely and stably to the drive shaft. As a result:
- the mower does not vibrate and does not transmit vibrations to the handle, which reduces user fatigue,
- bearings and drive components are protected from excessive wear caused by the beating of an unbalanced blade,
- the entire cutting system runs quieter and more culturally, which is important especially in dense areas.
In everyday use, this means hassle-free mowing in the home garden, on the allotment or around the business - without having to service the mower frequently due to vibration and damage to the drive components.
K35 series mower blade 66050018CR - durable steel and blade longevity
One of the most important features of a mower blade is its resistance to wear and tear. K35 SERIES MOWER Knife 325MM 66050018CR is made of high quality structural steel with properly selected hardness. Hardening of the material provides:
- resistance to dulling with frequent mowing,
- greater resistance to impact against small stones, twigs and uneven ground,
- less risk of cracking or deformation even with heavy use.
In practice, this translates into a less frequent need for sharpening, which saves time and service costs. The user can enjoy a sharp, effective cut for a longer period of time. During typical use, such as regular lawn mowing every 7-10 days throughout the season, the blade maintains high quality work and does not require frequent replacement.
In gardens where the grass is sometimes dried out and mowing happens on unlevel ground, the durable steel of the blade minimizes the risk of chipping on the cutting edges. This ensures that your lawn is not "ragged" and the blades are evenly cut, reducing yellowing at the ends.
Accurate cutting and an aesthetically pleasing lawn - how the 325MM blade for the K35 series mower works
Properly designed blade profile directly affects the quality of the cut and the formation of the airflow inside the mower housing. The 325MM blade for the K35 series mower 66050018CR is designed to:
- cleanly and evenly cut blades of grass,
- assist in lifting the grass in front of the blade, resulting in an even mowing effect,
- facilitate the ejection of cut grass into the trash (depending on the design of the mower in question).
As a result:
- the lawn looks even and aesthetically pleasing after one pass, without "clumps" or undercut sections,
- the need for corrections is kept to a minimum,
- mowing large areas becomes faster and less tiring.
In practice, the user can efficiently mow a 400-600 sq. m. home garden in a single cycle, without having to go over the same areas repeatedly. This is especially important when mowing areas around single-family homes, row houses or small commercial buildings, where both time and visual effect are important.
Easy replacement and maintenance of the K35 mower blade - convenience for the user
The 325MM blade for the K35 series mower 66050018CR is designed to make its replacement as simple as possible and can be done by the user himself with basic tools. Standard mounting hole system allows you to quickly unscrew the old blade and install the new one.
When replacing, it's a good idea to follow a few simple rules:
- always disconnect the power supply to the mower (remove the plug from the socket or disconnect the spark plug wire on internal combustion engines),
- set the mower on its side so that the air filter and fuel system remain up (for internal combustion engines),
- use the appropriate wrench for the central screw, keeping in mind the direction of loosening and tightening.
Once a new blade is in place, regular inspection of the condition of the blades (e.g. once every few weeks during the season) and removal of accumulated grass from the cutting housing help to significantly extend its service life. Such a well-maintained blade will provide optimal mowing quality for a long time.
Use of 325MM blade for K35 series mower 66050018CR in daily garden maintenance
The 325mm blade for the K35 series mower is ideal for:
- single-family homeowners with a home lawn,
- users of allotment gardens,
- companies taking care of green areas around offices, warehouses or stores,
- managers of small common areas on housing estates.
In typical applications:
- allows you to quickly cut grass between flower beds and along fences,
- makes it easy to maneuver around trees and shrubs thanks to its compact working width,
- provides an even cutting height across the entire mowing width, which is of great importance when caring for representative front lawns.
Regular replacement of a worn blade with a new one, such as model 66050018CR, translates into a healthier lawn - evenly cut blades regenerate faster, are less susceptible to disease and do not yellow at the ends. This gives your garden a well-groomed, professional look without having to invest in expensive maintenance treatments.
Technical specifications of 325MM blade for K35 series mower 66050018CR
- Overall length: 325 mm
- Width: 45 mm
- Center hole diameter: 20.5 mm
- Diameter of side holes: 10.5 mm
- Distance between side openings: 52 mm
- Purpose: k35 series mowers
- Material: steel (hardened, suitable for use in garden conditions)
- Product type: cutting blade / mower working element
Such selected parameters guarantee compatibility with K35 series mowers and optimized operation of the entire cutting system. Replacing a blade that meets the above specifications is one of the easiest and most effective ways to restore the mower to full operation and improve the quality of mowing.
FAQ - Frequently asked questions about the 325MM knife for the K35 series mower 66050018CR
Question 1: Does this blade fit all K35 series mowers?
Yes, the 325MM K35 SERIES MOWER Knife 66050018CR is designed for mowers designated as the K35 series, which use a mounting system with a 20.5mm center hole and 10.5mm side holes at 52mm spacing. It's always a good idea to compare the dimensions of your old knife with the specifications before you buy it.
Question 2: Every how long should you replace the blade on the mower?
Frequency of replacement depends on the intensity of use and operating conditions. If you regularly mow your home lawn once a week, periodic sharpening is usually enough, and you may need to replace the blade with a new one every few seasons. However, if deep chips, cracks or severe deformation appear on the knife, it should be replaced immediately.
Question 3: Is the new knife factory balanced?
Yes, the blade is factory balanced to ensure stable operation of the mower and minimize vibration. When sharpening at home, it is a good idea to control its balance (for example, on a simple knife balancing device), so as not to lead to uneven weight distribution.
Question 4: Can I install the blade on the mower myself?
Yes, most users are able to replace the knife themselves with basic tools. However, it is crucial to follow safety precautions: unplug the power supply, position the mower steadily, and use the proper wrench for the center bolt. When in doubt, it's a good idea to enlist the help of a professional service.
Question 5: How to take care of a knife to make it last as long as possible?
After each mowing, it is a good idea to remove debris from the cutting housing and the blade itself. Every few weeks you can check the sharpness of the cutting edges and, if necessary, gently sharpen them, maintaining the original sharpening angle. Avoid mowing on very rocky terrain and watch out for hidden obstacles such as thick branches or roots.
Question 6: Is this blade suitable for mulching?
The 325MM blade for the K35 series mower 66050018CR is primarily a classic cutting blade for standard mowing and grass ejection/collection. It can partially shred the mowed material, but the full mulching function is provided by special mulching blades, if the manufacturer of the mower has provided for them. Before buying a mulching blade, it is a good idea to check the recommendations of the manufacturer of the device.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.