VEIN HEAD LONGLIFE 2.4 MM Ø130 MM 63129008
- Oleo-Mac LONGLIFE 2.4 mm Ø130 mm vein head 63129008 with Load & Go system. Quick change of line, 10x1.25 LW thread, ideal for petrol scythes and professional lawn mowing.
LONGLIFE 2.4 MM Ø130 MM HEAD OF BLADES 63129008 - professional head for Oleo-Mac petrol cutters with Load & Go system
VEIN HEAD LONGLIFE 2.4 MM Ø130 MM 63129008 is a high quality, universal cutting head of the type Load & Go, designed for Oleo-Mac brushcutters and other models equipped with threads 10x1.25 LW. Thanks to its special design, it allows instant replacement of the line without the need to dismantle the head, which significantly reduces downtime and increases the comfort of use.
The LONGLIFE model is designed for intensive use in home gardens, orchards, urban green spaces and around commercial buildings. Robust materials and a fine-tuned line ejection mechanism guarantee long life, precise mowing and reliability even in frequent operation in harsh conditions.
Load and Go universal vein head with 2.4 mm line to fit 10x threaded cutters1.25LW.
The head provides quick installation of the line, which only needs to be put through the holes and wound. When lightly bumped against the ground (with the device turned off), the line will automatically extend.
Head compatible with Oleo-Mac cutters : BCH 400 S / BCH 40 T / BCH 400 T / BCH 40 BP / BC 400 BP / SPARTA 25 / SPARTA 250 T / SPARTA 250 S / BC 241 S / BC241 T / BC 270 S / BC 270 T / BC 300 S / BC 300 T / BC 241 D / BC 300 D / BC 350 S / BC 350 T / BC 400 S / 741 / BCF 430 / BC 430 S / BC 430 TL / BC 360 4S / BC 360 4T
What is the LONGLIFE 2.4 mm Ø130 mm vein head 63129008?
LONGLIFE 2.4 mm Ø130 mm vein head 63129008 is the working element of a petrol scythe, in which the cutting line is attached. It is responsible for the effective trimming of grass, weeds and lower bushes. LONGLIFE version is a reinforced design for long-term use, made of impact- and abrasion-resistant plastics.
Head diameter Ø130 mm and the line used 2.4 mm represent an optimal compromise between mowing precision and cutting power. Such a set will work well for both the delicate finish of the lawn and more demanding work on the edges of the plot, around fences or trees.
Thanks to the system Load & Go the user can replace the line in seconds without the use of additional tools. Simply put a section of fishing line through the holes in the head, align its length on both sides, and then wind by turning the knob. When you start the scythe and lightly bump the head against the ground, the line will automatically extend to the correct length.
Where the LONGLIFE 2.4 mm Ø130 mm vein head is mounted 63129008?
The LONGLIFE head is designed for installation on petrol cutters and trimmers equipped with the appropriate working shaft thread - in this case 10x1.25 LW. This means that it fits a wide range of equipment, including many popular brand models Oleo-Mac.
Examples of Oleo-Mac lawnmower models compatible with the LONGLIFE head 63129008:
- BCH 400 S, BCH 40 T, BCH 400 T, BCH 40 BP, BC 400 BP, BC 400 S,
- SPARTA 25, SPARTA 250 T, SPARTA 250 S,
- BC 241 S, BC 241 T, BC 241 D,
- BC 270 S, BC 270 T, BC 300 S, BC 300 T, BC 300 D,
- BC 350 S, BC 350 T,
- 741, BCF 430, BC 430 S, BC 430 TL,
- BC 360 4S, BC 360 4T.
Installation of the head is done in a few simple steps:
- Disconnect the motor and protect the device from accidental startup.
- Lock the gearbox (usually with a factory bolt or screw) and unscrew the existing head.
- Put a new LONGLIFE head on the work shaft with a 10x1.25 LW thread.
- Screw carefully, making sure the head sits firmly and axially.
- Load the line according to the Load & Go scheme and get started.
Thanks to the clear pictograms on the packaging and the instructional video embedded above, even a less experienced user can easily handle the replacement of the head and line.
Use of LONGLIFE 2.4 mm Ø130 mm vein head 63129008 in daily work
The LONGLIFE head is designed for a wide range of applications. With a diameter of 130 mm and a 2.4 mm line, you can effectively mow both fine grass and tougher weeds.
Typical applications:
- Backyard work - finishing the edges of the lawn at walls, flowerbeds, paths, access to the house, at the garage and driveways. The head allows precise cutting of grass where a traditional mower cannot access.
- Maintenance of green areas - maintenance of areas around companies, institutions, playgrounds, parking lots, sports fields. The Load & Go system reduces downtime for the service team, resulting in real time and cost savings.
- Work in orchards and on plots of land - mowing between rows of trees, shrubs, around fence posts, gazebos, greenhouses or film tunnels. The 2.4mm filament is strong enough to effectively cut weeds, yet flexible enough to minimize the risk of damage to tree bark.
Thanks to the automatic extension of the line when the head lightly hits the ground, the user does not have to stop work and manually adjust the length of the line. That's especially important for longer mowing sessions - fewer interruptions mean faster job completion.
Oleo-Mac LONGLIFE 2.4 mm Ø130 mm vector head 63129008 - key features and user benefits
1. Load & Go system - express line replacement
Load & Go mechanism allows you to put on a new line in tens of seconds. No need to unscrew the case, remove the inserts or reach for additional tools. In practice, this means:
- less downtime when mowing large areas,
- convenience for the operator - no frustration when changing the line,
- the possibility of quick preparation of the device for work even just before going to the order.
2. Durable LongLife Construction
The head housing is made of durable plastics resistant to impacts with stones, curbs or tree trunks. This reduces the risk of breakage and premature wear, which is especially important for service companies and users who mow a lot and often.
3. Automatic line ejection after hitting the ground
Function tap & go (hit and run) makes the line eject automatically when the head is lightly tapped against the ground (after stopping rotation and turning the unit off for adjustment). It allows:
- maintaining optimal line length during operation,
- maintaining an even quality of cut,
- reducing line loss due to being too short or too long.
Why choose the LONGLIFE 2.4 mm Ø130 mm head 63129008 for your scythe?
By choosing a cutting head, you are directly investing in the comfort and efficiency of your work. The LONGLIFE model 63129008 distinguishes itself from standard heads primarily:
- versatility - Oleo-Mac's extensive list of compatible models and standard 10x1.25 LW thread make it compatible with many popular cutters,
- time saving - Fast insertion and rewinding of the line, minimizing technological interruptions,
- durability - Strong plastics, thoughtful design, optimized line guidance system,
- convenience of use - Simple installation procedure, clear pictograms, intuitive operation even for less experienced users,
- security - Stable mounting, properly balanced head, the ability to maintain the correct length of the line without dismantling the device.
It is the ideal choice for both the individual user who values trouble-free operation and long service life, and for professionals who maintain green spaces on a daily basis.
Technical data of LONGLIFE 2.4 mm Ø130 mm vein head 63129008
- Product type: vein head for brushcutters and trimmers
- Model: LONGLIFE Load & Go 63129008
- Head diameter: Ø130 mm
- Line diameter: 2.4 mm
- Line Rewinding System: Load & Go (fast charging from the outside)
- Method of line extension: automatic after lightly bumping the head against the ground
- Mounting threads: 10x1.25 LW
- Application: petrol scythes / trimmers Oleo-Mac and others with compatible threads
- Purpose: household and professional use
- Compatible Oleo-Mac models: BCH 400 S, BCH 40 T, BCH 400 T, BCH 40 BP, BC 400 BP, SPARTA 25, SPARTA 250 T, SPARTA 250 S, BC 241 S, BC 241 T, BC 270 S, BC 270 T, BC 300 S, BC 300 T, BC 241 D, BC 300 D, BC 350 S, BC 350 T, BC 400 S, 741, BCF 430, BC 430 S, BC 430 TL, BC 360 4S, BC 360 4T
- Manufacturer/System Code: 63129008
- EAN code: 8026619057169
FAQ - Frequently asked questions about LONGLIFE 2.4 mm Ø130 mm vein head 63129008
1. Will this head fit my scythe?
LONGLIFE head 63129008 is designed primarily for Oleo-Mac lawnmowers listed in the description (BCH, SPARTA, BC, etc.).). If you have another mower, check the manual to see if the work shaft has a 10x1.25 LW thread. If so - the chances of compatibility are very high.
2. What line can I use in this head?
The manufacturer has provided for the use of line with a diameter of 2.4 mm. You will get the best results by using high quality original line or replacements of the same diameter and purpose for petrol cutters.
3. Is replacing the fishing line complicated?
Not. System Load & Go was developed precisely to make line replacement as simple and quick as possible. Simply put a section of line through the holes in the head, align the lengths and wind by turning the knob as marked. The whole process usually takes less than a minute.
4. Is the head suitable for intensive, professional work?
Yes. LONGLIFE design, reinforced materials and automatic line extension make the head very suitable for landscaping companies, orchards or large properties, where the equipment is operated regularly and under demanding conditions.
5. How to care for the head to serve as long as possible?
After work, clean the head of grass and soil debris, check the condition of the cover and line guides, and avoid hitting hard obstacles at full speed. Using the right diameter and quality of line also affects the life of the mechanism.
6. Can I use this head to cut very dense brush?
The 2.4mm vein head is ideal for grass, weeds and lighter weeds. For thick, woody shoots and shrubs, it is recommended to use special cutting discs. However, the LONGLIFE head can significantly reduce the growth of young shoots around fences or trees, making it easier to keep things tidy.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.