REINFORCED KNOB FOR HEADS Ø130 MM 63120030AR
- Reinforced knob for heads Ø130 mm 63120030AR - a solid fastener for cutting and working heads. Durable construction (plastic + metal), stable head pressure, less vibration and high reliability in professional work.
Reinforced knob for Ø130 mm heads 63120030AR - professional adjustment and secure fixing of the cutting head
Reinforced knob for Ø130 mm heads
What is the reinforced knob for Ø130 mm heads 63120030AR?
Reinforced knob for Ø130 mm heads 63120030AR is a rugged, heavy-duty mounting component designed to attach and adjust 130 mm diameter work heads, most commonly used on professional gardening and municipal equipment. The design of the knob combines a sturdy plastic base with a metal working surface, which ensures high mechanical resistance and stable transmission of forces during operation of the device.
From the user's point of view, it is a key operating component - the quality of the knob determines the secure seating of the head, the smooth operation of the machine and the safety of the operator. Reinforced construction increases the life of the whole set and reduces the need for frequent replacement of parts. With a standard diameter of 130mm, the knob fits a wide range of heads for easy fitting and service.
In practice, this means that when you invest in the 63120030AR knob, you get a durable, precision-made component that provides a stable mount even under heavy use, harsh field conditions and high dynamic loads.
Where the reinforced knob for Ø130 mm heads is mounted 63120030AR?
Reinforced knob Ø130 mm 63120030AR is mounted directly in the working head assembly - at the point where the clamping element presses the head against the shaft or drive plate of the device. It is mainly used in:
- cutting and mowing heads of garden equipment (e.g., mowers, trimmers, line trimmers),
- the working heads of municipal machines used for maintenance of green areas,
- specialized heads for cutting, mulching or tending roadsides and wastelands.
Installation of the knob is usually done using standard screws or pins provided by the head manufacturer. Thanks to its precise diameter adjustment, the knob ensures proper head alignment and even force distribution, which is crucial for vibration-free and comfortable use. Replacement is most often limited to removing the worn-out component and inserting a new knob in the same place - without interfering with other machine components.
In daily use, the installation of the knob takes place wherever the device works intensively: on farms, gardening companies, municipal utilities and home gardens, where the operator expects reliability and safety of operation.
Use of reinforced knob for Ø130 mm heads 63120030AR in daily operation
Reinforced knob for Ø130 mm heads 63120030AR is designed for intensive professional use. It works well wherever the head is exposed to frequent impacts, heavy loads and contact with hard obstacles (stones, roots, curbs). Typical applications include:
- Maintenance of lawns and green areas - secure attachment of the cutting head translates into an even mowing height and no play that could cause run-out or dangerous vibration.
- Work on roads and roadsides - When mowing ditches, slopes and wastelands, the head often works in difficult conditions. A reinforced knob stabilizes its position and protects it from accidental loosening.
- Operation in service companies - with frequent transportation of machines, daily assembly and disassembly of heads, a solid knob is a guarantee that the fastening elements will withstand hundreds of cycles without damage.
Garden owners will appreciate durability and safety above all, while professionals will appreciate reduced downtime and service costs. Thanks to its reinforced design, the knob allows you to work continuously without worry, which is especially important during the season of intensive gardening and municipal work.
Reinforced knob for Ø130 mm heads 63120030AR - quality, durability and reliability
One of the key features of the 63120030AR knob is its reinforced design. Sturdy, ribbed base made of shatterproof plastic and a metal work surface ensure long component life - even when working in dusty, humid environments and varying temperatures. This is especially important for users who operate the equipment for many seasons and expect minimal maintenance.
The strength of the knob also translates into safety. Securely pressing the head against the drive shaft reduces the risk of it coming loose or breaking off during operation. This allows the operator to focus on the task at hand - whether it's mowing the lawn next to the house or caring for extensive landscaping - without worrying about sudden attachment failures.
Product reliability has a direct impact on operating costs. Less frequently replaced parts mean less downtime and lower service expenses. For gardening and municipal companies it is a measurable saving of time and money, and for individual users - the comfort of work and the certainty that the device will be ready for action whenever it is needed.
Key benefits of using the Ø130 mm 63120030AR knob on your device
When you decide to install a reinforced knob for Ø130 mm heads 63120030AR, you gain a number of practical advantages that you will feel in your daily work:
- Stable head operation - properly adjusted diameter and reinforced construction eliminate unwanted backlash, and thus vibration and noise. This is important both for precision mowing of representative lawns and for working in terrain with obstacles.
- Easy replacement and service - simple design of the knob makes its installation and removal do not require specialized tools. In practice, the replacement can be carried out directly in the field, reducing equipment downtime.
- Universal application - diameter of 130 mm allows the knob to be used in many head models. This allows you to standardize wear parts in your machinery fleet and reduce the number of different items in stock.
These features make the 63120030AR dial an attractive proposition for both individual users and companies that want reliable solutions with optimal equipment maintenance costs.
Technical highlights of the reinforced knob for Ø130 mm heads 63120030AR
- Working diameter: Ø130 mm
- Intended use: reinforced knob for cutting / working heads
- Construction: base made of durable plastic + metal clamping surface
- Type: head fixing/adjusting element
- Product code: 63120030AR
- EAN code: 8026619056605
Configured in this way, the dial is compatible with a wide range of heads with a standard diameter of 130 mm. Combined with high quality workmanship, this creates a product ideal for professional use in demanding work environments.
FAQ - Frequently asked questions about reinforced knob for Ø130 mm heads 63120030AR
To which devices the reinforced knob Ø130 mm 63120030AR fits?
The knob is designed for heads with a diameter of 130 mm used in garden and municipal equipment, such as mowers, trimmers, trimmers or specialized machinery for green maintenance. Before buying, it is a good idea to compare the diameter and method of attachment with the technical documentation of your machine.
Can the 63120030AR knob be installed by itself?
Yes, installation of the knob is generally simple and can be done by yourself with basic tools. However, it is important to follow the instructions of the manufacturer of the device, observing the correct order of installation and tightening torque of the fasteners.
What are the benefits of using a reinforced knob instead of a standard one?
Reinforced knob provides greater load resistance, longer life, and better head stability. As a result, it reduces the risk of failure, improves working comfort (less vibration, stable machine guidance) and reduces operating costs associated with the replacement of worn components.
Is the dial weatherproof?
The use of durable plastic and a metal clamping surface ensures high resistance to typical garden and outdoor conditions - moisture, temperature changes and dust. Regular cleaning and inspection of the component's condition will further extend its life.
What to look for when replacing a knob with a new one?
First of all, you need to make sure that the new knob has the right diameter (in this case 130 mm) and is compatible with the type of head and the way it is attached to your device. During installation, it is a good idea to check that the adhesion surfaces are clean and the components are tightened with sufficient force - this ensures stable and safe operation of the machine.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.