BOOM EXTENSION FOR BCH250D/BCI35D 61469210
- Oleo-Mac professional boom extension 61469210 for BCH250D and BCi35D (40V) systems. Lightweight (0.9 kg), 100 cm in length - extends the reach of the trimmers and hedge trimmers, allowing you to work safely from the ground.
Offered only the extension that fits the BCH250D system (diesel model) and BCi35D (40V battery model). WELCOME TO THE LIST OF RELATED PRODUCTS BELOW AND CHOOSE THE OPTIMAL OFFER.
By installing a 100 cm long boom, the length of the drive shaft can be increased to reach hedges and branches at a greater height. Recommended for trimmers and hedge trimmers.
Technical specifications:
| Weight | 0.9 kg |
| Length | 100 cm |
What is a boom extension for the BCH250D/BCi35D 61469210 and why you should have one?
Boom extension for BCH250D/BCi35D 61469210 is a sturdy aluminum drive shaft extension module for BCH250D (diesel) and BCi35D (40V battery operated) compatible MFPs. This element was designed for professional users and demanding garden owners who need safe and convenient access to hard-to-reach places - high hedges, tree crowns or dense shrubs.
With a length of 100 cm, the extension significantly increases the working range of the tool, without the need for ladders or platforms. This not only saves time, but most importantly, it means greater work safety and greater comfort in the operation of gardening equipment.
Where and how to mount the boom extension for BCH250D/BCi35D?
The boom extension 61469210 has been designed as a system component - it mounts between the drive unit (BCH250D internal combustion engine or BCi35D 40V battery drive) and the actual work attachment, such as a trimmer or hedge trimmer.
Installation is done with factory quick-action couplings and pressure screws, which provide a rigid, secure connection without backlash. The user does not need specialized tools - just disconnect the existing attachment, plug the extension into the shaft connection point, and then reattach the working tip. Well-profiled clamp and matched diameters ensure precise fit of components and maintenance of drive alignment.
The extension also has an ergonomic, non-slip grip section that improves the comfort of the machine when an additional shaft section is installed. This is especially important when working at maximum reach, when any additional grip support increases the certainty of movement.
Oleo-Mac boom extension 61469210 - maximum reach and work safety
The most important advantage of the Oleo-Mac boom extension 61469210 is that it realistically increases the working range by an additional 100 cm, without losing stability and control of the tool. In practice, this means that the user can freely work at a height of several meters while standing safely on the ground.
Three key user benefits:
- More reach without a ladder - reach higher branches, the tops of hedges or branches over garden paths without having to balance on a ladder. This significantly reduces the risk of falls and injury.
- Greater precision cutting at height - The rigid, well-fitted boom provides stable guidance for the tool, making hedge cutting even and tree treatments accurate.
- Saving time and energy - not having to constantly reposition the ladder or search for additional supports makes the work go smoother, faster and with less operator fatigue.
In practice, the extension will work well, for example, during:
- forming a tall hedge surrounding the property,
- trimming branches over a driveway or garden path,
- care of fruit trees without entering the crown,
- removal of dry, dangerous branches over children's play area or terrace.
Robust, lightweight design - comfort regardless of user experience
The boom extension 61469210 is made of lightweight yet durable metal alloy. Low weight - only 0.9 kg - makes the total weight of the kit still comfortable for the operator after it is installed, even for longer work sessions.
Three important design features:
- Low weight 0.9 kg - Reduces the load on shoulders and back, which will be appreciated by both professionals and hobby users. So you can work longer without getting too tired.
- Length 100 cm - The ideal compromise between significantly increasing range and maintaining maneuverability. The tool remains well balanced and easy to handle.
- Durable joints - Robust mechanical couplings and metal clamps provide high resistance to vibration and torsional loads that occur when cutting branches or pruning a dense wall of greenery.
In everyday use, this translates into comfortable, stable handling of the machine, even when you're working with thick protective gloves. The extension is recommended both for short, quick corrections in the home garden and for intensive work in orchards, nurseries or urban green spaces.
The use of the extension 61469210 with the lopper and hedge trimmer
The manufacturer explicitly recommends using the boom extension 61469210 with attachments such as trimmer and hedge trimmers. It is with these tools that the extra meter of length makes the biggest difference in comfort and efficiency of work.
Example application scenarios:
- Trimmer - Quick removal of single, protruding branches in tree crowns, pruning of branches over access roads or paths in orchards. No need to drive a hoist or set up a ladder in unstable terrain.
- Hedge trimmers - Forming tall decorative hedges, leveling the upper edges of green walls at fences, and pruning shrubs growing on slopes or embankments where it is difficult to stand steadily.
- Seasonal work - Early spring tree clearance, summer ornamental greenery shaping, or autumn cleanup before the winter season - in each of these tasks, the extender realistically increases the capabilities of your tool kit.
Thanks to the modular design of the system, you can adapt the machine to your current tasks in a few moments. When you need more range - you mount an extension 61469210. When you work with low bushes - you quickly return to the standard configuration, maintaining full ergonomics.
Key advantages of boom extension for BCH250D/BCi35D 61469210 from the customer's point of view
In summary, purchasing a boom extension 61469210 is an investment that quickly pays for itself in the form of convenience, safety and time savings.
- Compatibility with BCH250D and BCi35D 40V system - you are assured that the component fits your machine perfectly and retains the full functionality of the drive.
- Professional quality workmanship - high resistance to wear, vibration and weather conditions, which is especially important for intensive use.
- User security - The ability to work from the ground, without balancing on ladders, reduces the risk of accidents and injuries.
- Ergonomics and low weight - Only 0.9 kg of additional weight while gaining as much as 100 cm of working reach.
- Versatile application - From home gardens, to fruit orchards, to professional urban landscaping companies.
Technical specifications of the boom extension 61469210
| Destination | System BCH250D (diesel model) and BCi35D (40V battery model) |
| Product type | Boom / drive shaft extension |
| Overall length | 100 cm |
| Weight | 0.9 kg |
| Recommended use | Trimmer, hedge trimmer, working at height |
| Material | Light metal alloy (boom shaft), metal fasteners |
| Assembly | Between the drive unit and the work attachment, using factory quick-release couplings |
FAQ - Frequently asked questions about boom extension for BCH250D/BCi35D 61469210
Question 1: What devices does the boom extension work with 61469210?
The extension is designed exclusively for the BCH250D (diesel model) and BCi35D (40V battery model) system. Fits the drive units of these series and compatible work attachments, such as a trimmer or hedge trimmer.
Question 2: Is it complicated to install the extension?
Not. Installation is done by disconnecting the drive shaft, plugging an extension between the drive unit and the attachment, and tightening the factory clamps. The entire operation usually takes a few minutes and does not require specialized tools.
Question 3: By how much does the working range increase after applying the extension?
The extension has a length of 100 cm, which in practice translates into an additional meter of working range of the tool. This allows comfortable work at a height of several meters, depending on the height of the operator and the length of the mounted attachment.
Question 4: Does the extra weight of the extension weigh heavily on the hands?
The extension weighs only 0.9 kg, so with the correct adjustment of the carrying strap and handles, the tool remains well balanced. For most users, the difference in perceived weight is small compared to the benefits of greater range.
Question 5: For which jobs will the boom extension work best?
You'll experience the greatest benefits when trimming tall hedges, limbing trees, removing dry branches over paths or driveways, and anywhere you've previously had to use a ladder. Extension 61469210 allows most such tasks to be done safely from ground level.
Question 6: Does the extension affect the life of the drive train?
The extension is a system component designed to work with BCH250D and BCi35D units. When properly installed and using original accessories, it does not adversely affect the life of the drivetrain. However, it is important to regularly check the condition of the joints and periodically lubricate the shaft, according to the guidelines of the manufacturer of the device.
Question 7: Can I use the extension with tools other than the trimmer and shears?
The extension has been specifically recommended for use with the trimmers and hedge trimmers, but can also work with other attachments compatible with the BCH250D/BCi35D shaft system, as long as the manufacturer allows such use. It's always a good idea to check the recommendations in the instruction manual for a particular accessory.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.