AIR FILTER FOR LAWNMOWERS BCH400 61450061R
- Air filter for BCH400 61450061R lawnmowers - sponge filter element to protect the engine from dust, grass and dirt. Provides full power, stable operation, reduced fuel consumption and easy, quick installation. Ideal for BCH400 series 1 cutters.
AIR FILTER FOR BCH400 61450061R SCYTHES - PROFESSIONAL ENGINE PROTECTION FOR YOUR PETROL SCYTHE
Air filter for BCH400 series 1 lawnmowers - sponge
AIR FILTER FOR LAWNMOWERS BCH400 61450061R is a high-quality filter cartridge made of durable sponge, designed for BCH400 series petrol cutters. Its task is to effectively purify the air sucked into the carburetor and cylinder so that a mixture free of dust, dust, grass residue and other particles that can accelerate the wear of components enters the engine.
The filter is precisely shaped to fit the air filter housing of the BCH400 series lawnmowers, which ensures the tightness of the intake system and stable seating of the cartridge even during intensive operation in difficult terrain conditions.
What is the air filter for BCH400 61450061R lawnmowers and how does it work?
Air filter 61450061R is a replaceable consumable made of properly selected porous technical sponge. The material is:
- Multi-layered and porous - Traps dust particles, sand and grass clippings while allowing air to flow freely to the engine.
- Damage-resistant - retains its shape and elasticity despite vibrations and temperature changes typical of the operation of combustion scythes.
- Adapted for periodic cleaning - in many cases it is possible to gently rinse and reuse (in accordance with the recommendations of the manufacturer of the device), but in case of heavy soiling it is recommended to replace with a new cartridge.
During operation, the scythe draws air through a filter. Dirt from the garden, roadside or meadow is retained on the surface of the sponge, and only clean air enters the engine, resulting in proper combustion of the fuel-air mixture, lower fuel consumption and longer life of the entire drive.
Where to install the air filter for the BCH400 61450061R lawnmowers?
Air filter 61450061R is mounted in the air filter housing, usually located on the side or rear of the BCH400 scythe engine. In practice, the replacement process is as follows (illustrative description):
- Disconnect the cutter from the fuel supply (protect yourself from accidental starting).
- Open the air filter housing - usually by tilting back the latch or removing a few screws.
- Remove the old, dirty sponge cartridge.
- Clean the inside of the case of dust and grass residues.
- Place new sponge filter BCH400 61450061R in the guides/dent, carefully adjusting its shape.
- Close and secure the case.
Proper installation and fit of the cartridge are key - leaks in the housing can cause unfiltered air to be drawn in, resulting in accelerated wear of the cylinder, piston and rings.
Application of the BCH400 61450061R filter - why it is so important?
This model of filter is designed primarily for brushcutters of the series BCH400. It is used wherever the device works in dusty, dirty environments:
- Care of home lawns - Grass mowing, trimming around flower beds, trees and fences.
- Cleanup work on roads and sidewalks - Grass cutting at curbs, where rising sand and dust place a heavy load on the intake system.
- Maintenance of green areas - Parks, recreational areas, ROD plots and industrial areas, where the scythe often works several hours a day.
Regular replacement of the air filter:
- Protects the engine from seizure and excessive wear.
- Ensures full power and stable operation of the scythe even at high speeds.
- Reduces fuel consumption and the amount of smoke from the exhaust system.
Sponge air filter for BCH400 61450061R lawnmowers - quality, durability and reliability in daily use
By selecting sponge air filter for scythe BCH400 61450061R, you are investing in a proven and easy-to-use consumable that realistically extends the life of your machine. The most important benefits from the user's point of view are:
- High filtration efficiency - porous structure of the sponge retains a wide range of dirt present during mowing. In practice, this means less risk of carburetor seizure, less deposits in the combustion chamber and less frequent servicing.
- Stable engine operation - clean air is the optimal fuel-air mixture. The scythe fires more easily in the cold, does not throttle when adding gas, and maintains even operation at high rpm, which is especially important when cutting tall, wet grass or weeds with woody stems.
- Easy installation and operation - replacement of the filter does not require specialized tools or a visit to the service center. It's an activity that most users will perform on their own in a few minutes, which significantly reduces the cost of ongoing operation of the scythe.
In everyday applications - such as mowing a recreational plot once a week or doing regular cleaning around the house - a properly selected air filter can keep the mower in good shape for many seasons. With intensive use (such as in gardening companies), frequent inspection and replacement of the filter becomes the basis for trouble-free operation of the equipment during the season.
Comfort of use and economy - how the 61450061R filter translates into daily operation?
A properly selected and regularly replaced air filter has a direct impact on the working comfort and operating costs of the BCH400 scythe:
- Lower fuel consumption - reduction of pollutants in the intake promotes more efficient combustion of the mixture, which translates into real savings, especially in intensive operation.
- Lower noise and vibration levels - Stable engine operation reduces annoying vibrations and irregular revolutions, making mowing less tiring for the operator.
- Less frequent service required - A clean intake system means slower fouling of the carburetor and spark plug, so breaks for adjustment and cleaning are less frequent, and the equipment spends more time on the job than in the workshop.
In practice, using the right filter, the garden owner feels the difference not only in the culture of the device, but also in the cost of the entire mowing season - less fuel, fewer service parts and longer intervals between failures.
Example of technical data and performance features of air filter BCH400 61450061R*
*Parameters may vary slightly depending on the specific production run.
- Purpose: bCH400 petrol scythe (series 1).
- Cartridge type: filter sponge.
- Color: black.
- Material: foam with open-cell structure, resistant to dirt and vibration.
- Mounting type: replacement cartridge for factory air filter housing.
- Function: protection of the engine from dust, dust, grass particles and other contaminants from the environment.
With simple installation and high filtration efficiency, the air filter BCH400 61450061R is one of the key items to take care of when planning the seasonal maintenance of your petrol scythe.
FAQ - Frequently asked questions about air filter for BCH400 61450061R scythes
1. How often should you change the air filter on the BCH400 lawnmower?
Frequency of replacement depends on the intensity and conditions of operation. For typical amateur use, it is recommended to check the filter every few hours of operation and replace it at least once a season. In very dusty environments (e.g., along roads, in dry grasslands), the filter may need to be replaced even more frequently.
2. Can the sponge filter be washed and reused?
In many cases, a lightly soiled sponge filter can be gently rinsed in clean water with a small amount of mild detergent, dried thoroughly and reinstalled. However, if the sponge is hard, scarred or heavily contaminated, it is recommended to replace it with a new cartridge so as not to risk damaging the engine.
3. How to recognize that the filter is suitable for replacement?
Replacement of the filter is evidenced by a visibly dirty surface (dark discoloration, compacted texture), a decrease in engine power, difficulty firing or unstable revs. If after removal the filter is mechanically damaged (tears, cavities), it is absolutely necessary to replace it with a new one.
4. Will this filter fit any other model of scythe than BCH400?
The filter 61450061R is dedicated to the cutters of the series BCH400 series 1. Its use on other models is not recommended unless the device manufacturer clearly indicates compatibility. It's always a good idea to check your scythe manual or the markings on your old filter.
5. Does replacing the filter affect the warranty of the device?
Regular replacement of the air filter according to the manufacturer's recommendations is usually one of the conditions for maintaining the warranty. Using an inadequate, damaged or excessively dirty filter can lead to engine damage that will not be covered by the warranty.
6. Does filter installation require specialized tools?
No, in most cases basic tools or even just unfastening the filter housing latch will suffice. The process itself is simple and intuitive, allowing the user to take care of the proper air filtration of his BCH400 lawnmower on his own.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.