AIR FILTER FOR BC430/ BC431/ BC431TL LAWNMOWERS 61350078R
- Original Oleo-Mac air filter 61350078R for BC430, BC431, BC431TL and BCF430 lawnmowers. Effectively protects the engine from dust and grass, improves power, running stability and reduces fuel consumption. Ideal for intensive garden work.
Air filter for BC430/ BC431/ BC431TL scythes - what is the part and what is it responsible for?
Air filter for Oleo-Mac BC430, BC431 and BC431TL lawnmowers, part number 61350078R, is a high-quality component of the intake system of a two-stroke engine. Its primary task is to effectively clean the air drawn into the combustion chamber from dust, dust, grass particles and other contaminants that occur during work in the garden, at the allotment or in green areas. As a result, the engine of the petrol scythe works under optimal conditions, it obtains adequate power, and the risk of seizure and premature wear of mechanical components is significantly reduced.
The filter cartridge is made of high quality pleated filter material, embedded in a flexible frame. This design allows for a large filtration area with compact dimensions, while ensuring proper sealing in the filter housing. Changing the air filter regularly is one of the easiest yet most effective ways to keep Oleo-Mac petrol scythes in top shape for many seasons to come.
Where does the air filter 61350078R mount on Oleo-Mac BC430 / BC431 / BC431TL lawnmowers?
Air filter 61350078R is mounted in the air filter housing, located directly at the carburetor of the engine of the internal combustion scythe. This is where the air drawn in by the engine first goes before it is mixed with the fuel. In practice, this means that the filter:
- constitutes the first line of protection for the cylinder, piston, rings and bearings against dust and grass particles,
- prevents larger contaminants from entering the carburetor, reducing the risk of upsetting the carburetor or clogging the jets,
- affects stability of the fuel-air mixture, and therefore for ease of starting and even operation at all speeds.
Filter replacement is quick and intuitive. In most cases, this is enough:
- Disconnect the ignition cable from the spark plug (for safety reasons).
- Unscrew or unfasten the air filter housing cover.
- Remove the used filter and clean the inside of the housing of loose debris.
- Insert the new filter 61350078R, taking care to ensure proper alignment in the socket.
- Close the case and reconnect the wire to the plug.
With the proper installation of a new filter, Oleo-Mac BC430, BC431 and BC431TL scythes regain full efficiency, respond better to gas and use less fuel.
Oleo-Mac air filter 61350078R - application and compatibility with lawnmower models
The offered air filter is an original Oleo-Mac spare part, specially designed for selected models of the brand's petrol scythes. The use of a matched, dedicated filter ensures full dimensional compliance and a tight fit in the housing, which translates into safety and engine performance.
Filter 61350078R fits m.in. for the following models of Oleo-Mac petrol cutters:
- BC 430 S
- BC 430 T
- BC 430 TL
- BC 431 TL
- BC 431 - versions according to the manufacturer's designation
- BCF 430
Thanks to such wide compatibility, the filter will find application in equipment used by demanding individual users, as well as in garden service companies or in the maintenance of green areas around industrial plants.
Examples of daily applications:
- regular mowing of home lawns and plot edges,
- cleanup work on fences, slopes and ditches, where a lot of dust floats,
- maintenance of greenery in the areas of companies, housing estates or playing fields, where the scythe works for a long time at high speed.
The most important benefits of the air filter for BC430/BC431/BC431TL 61350078R scythes
Choosing the right air filter is an investment in longer engine life and the comfort of everyday work. The 61350078R cartridge offers a number of practical advantages that any Oleo-Mac lawnmower user will quickly experience:
- Effective filtration of contaminants - dense, pleated material traps particles of dust, sand and plant debris, keeping the interior of the engine clean and working surfaces free of excessive wear.
- Stable engine operation - Uniform air flow ensures proper fuel-air mixture, which reduces stalling, "throttling" at high rpm and starting problems.
- Fuel savings - Optimum combustion means lower mixture consumption and less smoke and exhaust emissions, which is especially important for long-lasting work.
- Protection from costly repairs - Regular replacement of the air filter reduces the risk of cylinder seizure, wear of piston rings and bearings, thus avoiding expensive service visits.
- Simple and quick installation - replacement can be carried out by the user himself, without specialized tools and a visit to the service center.
In practice, this means more reliable mowing, less downtime and the confidence that the machine will be ready to go whenever you need it - whether for short weekend mowing or intensive professional applications.
Quality, durability and reliability - why choose the original Oleo-Mac filter 61350078R?
Selection of original air filter is critical to the safety and longevity of the engine. The product with the number 61350078R is made in accordance with the rigorous standards of the manufacturer of Oleo-Mac lawnmowers, which translates into:
- precise matching of dimensions to the filter housing of the BC430, BC431 and BC431TL models - no leaks to allow dust "in the shortcut",
- resistance of the filter material for working conditions in dusty environments - the filter retains its properties throughout the preset service life,
- durable, flexible frame, which resists the vibration and oscillation generated by the two-stroke engine,
- consistent workmanship - each batch of product meets the same requirements, which makes it easier to conduct regular maintenance of the machinery fleet.
For the user, this means certainty of compatibility and no need to fit or modify replacements. The original air filter works with the carburetor and the rest of the intake system exactly as the machine manufacturer intended.
Service recommendations and best practices for using the air filter on Oleo-Mac lawnmowers
To get the most out of your 61350078R air filter, it's a good idea to follow a few proven operating principles:
- Regularly check the condition of the filter - especially after working in very dusty environments (dry grasses, roadsides, sandy areas). Replace the cartridge with a new one if it is visibly dirty.
- Do not use aggressive cleaning - blowing with low-force compressed air or gently shaking it off can help on an ad hoc basis, but is no substitute for periodic filter replacement.
- Use only filters according to the manufacturer's recommendations - Using elements with incorrect dimensions or too small a filter area can lead to rapid wear of the engine.
- Combine filter replacement with other maintenance activities - candle inspection, fuel line check and carburetor cleanliness will keep the machine in perfect shape for the entire season.
Applying these simple rules, the user prolongs the life of Oleo-Mac lawnmowers and gets stable performance regardless of field conditions.
Technical specifications of the air filter for Oleo-Mac BC430 / BC431 / BC431TL 61350078R lawnmowers
- Product type: air filter for brushcutters
- Purpose: oleo-Mac scythes from the BC 430, BC 431, BC 431 TL, BCF 430 series (and related models according to the manufacturer's designations)
- Part number: 61350078R
- Brand: Oleo-Mac
- Type of parts: original spare part (OEM)
- Construction: pleated filter cartridge embedded in a flexible frame
- Function: cleaning the air sucked into the combustion chamber, protecting the engine from dust, dust and plant particles
- Indicative width: about. 6.4 cm (according to catalog data for code 61350078R)
- Application: garden work, lawn mowing, maintenance of roadsides, green areas, areas around residential and industrial buildings
FAQ - Frequently asked questions about the air filter for BC430/BC431/BC431TL 61350078R scythes
Question 1: How often should you change the air filter on the Oleo-Mac BC430 / BC431 lawnmower??
Answer: Frequency of replacement depends on the intensity and conditions of operation. For typical domestic use, it is recommended to check the condition of the filter every few hours of operation and replacement at least once a season. In very dusty conditions (dry, dusty grasses, sandy areas), it is worth changing the filter more often - even several times a season.
Question 2: Does the filter 61350078R fit all Oleo-Mac lawnmowers?
Answer: No, the filter 61350078R is mainly for selected models in the series BC 430, BC 431, BC 431 TL and BCF 430. Before buying, it's a good idea to compare the model designation on the unit's nameplate with the compatibility list and check the part number in the manual.
Question 3: Can I clean this filter and reuse it instead of replacing it?
Answer: It is permissible to gently clean the filter of loose debris (e.g., light shaking or blowing with compressed air with a little force). However, the filter is a consumable item and once it becomes visibly dirty or the performance of the scythe decreases, it should be replaced with a new one to ensure full filtration efficiency.
Question 4: What are the symptoms of a worn or dirty air filter?
Answer: The most common symptoms are: difficult starting, stalling after adding gas, loss of power in dense grass, increased smoke, and significantly higher fuel consumption. If the symptoms persist after cleaning the filter, it is worth installing a new cartridge 61350078R.
Question 5: Can I do the installation of the 61350078R filter myself?
Answer: Yes, replacing the air filter is a simple service that most users can do themselves in a few minutes. Simply disconnect the ignition cable, open the filter housing, replace the cartridge with a new one and close the housing again, taking care to close it properly.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.