BLOWER FOR BC 241D/BC300D AND BCI530D 56V 61289130
- Universal blower attachment for BC 241D, BC 300D and 56V cordless BCi530D scythes. Lightweight (1.5 kg), powerful (600 m³/h, 60 m/s), ideal for quickly removing leaves, grass and dirt from the garden and driveways.
BLOWER FOR BC 241D/BC300D AND BCI530D 56V 61289130 is a high-quality attachment for multifunctional scythes and trimmers, designed for users who value speed of work, convenience and perfect order in the garden. It allows you to use one motor for several tasks - after mowing the lawn or trimming the hedge, you can turn the device into a powerful leaf blower in seconds.
It is a efficient garden blower attachment, compatible with models BC 241D, BC 300D and BCi530D 56V. Combines low weight with high airflow rate and speed, resulting in effective cleaning of even larger areas. It is ideal for both home gardens and work around the company, workshop or leisure property.
DMUCHAWA PROVIDER FOR BC 241D/BC 300D AND BCi530D 56V - WHAT IT IS AND HOW IT WORKS?
Blower attachment for BC 241D/BC 300D and BCi530D 56V is a dedicated work module mounted on the drive shaft of the BC and BCi series of scythes or trimmers. It harnesses the power and torque of the main engine, turning it into a powerful device for blowing away leaves, grass and light debris.
OFFER APPLIES TO BLOWER ATTACHMENT ONLY. DMUCHAWA COOPERATES WITH BC241D/BC300d. WE INVITE YOU TO OPEN THE TAB RECOMMENDED PRODUCTS AND SEE THE OFFER OF OTHER STARTERS.
After mowing the lawn, trimming the hedge and trimming the trees, the "no tools" quick-connect system allows you to connect a blower to the engine: the perfect tool for removing leaves, shrubs or debris from the garden.
In practice, this means that instead of buying a separate blower, you can simply buy this attachment and replace the working tool in one move. The motor remains the same, only the tip changes, which significantly reduces equipment costs and makes it easier to store the equipment.
How the blower works? The attachment housing contains an impeller that draws in air, which is then compressed and directed to a long outlet nozzle. The concentrated high-velocity air stream (up to 60 m/s) easily lifts leaves, dry branches, small stones or debris, allowing them to be collected in one place or blown away from the work area.
Where do you mount the DMUV for BC 241D/BC300D AND BCI530D 56V 61289130?
The blower attachment is designed for quick installation on the common drive unit cutters and trimmers compatible with the manufacturer's system. Thanks to the system "no tools" no additional tools needed - no need for wrenches, screwdrivers or Allen keys.
Installation location:
- the drive shaft end of the scythe/multifunctional mower,
- standard system connector provided for other attachments (e.g., chainsaws, hedge trimmers, pruners),
- fastening points for a secure and stable connection to the gearbox.
This allows a user who already owns a BC 241D, BC 300D or a 56V battery-powered BCi530D cutter to get the job done in a matter of moments:
- disconnect the attachment currently in use (e.g., grass cutting head),
- slide in and lock the blower attachment,
- start working right away without any additional adjustment.
Examples of daily applications:
- after mowing the lawn - a quick blowout of paving stones and paths,
- around the house - removing leaves along the fence and from the corners of the building,
- at the garage and workshop - cleaning the driveway from sand, sawdust and dust.
Application of blower attachment for BC 241D/BC 300D and BCi530D 56V
BLOWER FOR BC 241D/BC300D AND BCI530D 56V 61289130 is a versatile tool that will work for most of the year. Its main task is to maintaining order on green areas and paved surfaces.
Key applications:
- Leaf removal from lawns, driveways, patios and sidewalks - instead of raking by hand, you quickly blow the entire layer of leaves into one place.
- Cleaning the lawn after mowing - Grass residue from paving stones, edging, paths and stairs is blown away in an instant.
- Cleaning up after hedge and branch trimming - fine shoots, needles and shavings do not linger in beds or paths.
- Tidying up around outbuildings - blowing off dust, sawdust or small dirt from a workshop, garage or shed.
- Pre-season and post-season cleanup work - cleaning alleys, playgrounds, backyard parking lots.
High airflow rate - 600 m³/hour. - Makes work fast and efficient. Even with larger areas, cleaning time is significantly reduced compared to traditional raking or sweeping.
BLOWER FOR BC 241D/BC300D AND BCI530D 56V - TECHNICAL SPECIFICATIONS AND KEY PARAMETERS
Carefully selected technical parameters guarantee high productivity while maintaining user comfort.
Technical specifications:
| Weight of tool / whole machine | 1.5 kg / 5.5 kg |
| Air flow rate | 600 m3/hour. |
| Air velocity | 60 m/s |
Low weight of the attachment - only 1.5 kg - makes the whole machine, including the engine, weigh approx. 5.5 kg. This makes work less tiring, even during longer sessions. The blower can be comfortably operated with one or two hands, maneuvering the nozzle exactly where a strong stream of air is needed.
Air velocity 60 m/s allows you to effectively move not only dry leaves, but also heavier, wet debris or small pebbles. In practice, this means that the device copes with different weather conditions and types of pollution.
Flow rate of 600 m³/hour. is optimal for home and semi-professional use - from small gardens to larger properties or areas around businesses.
Convenience, speed and economy - key benefits for the user
Purchase blower attachment DMUCHAWA for BC 241D/BC300D AND BCI530D 56V 61289130 is an investment in work comfort and time savings.
Key benefits:
- One engine - many functions: instead of buying several separate units, you use one drive unit for mowing, trimming and cleaning.
- Very fast changeover: the "no tools" system allows you to change the attachment in seconds - ideal for people who frequently change the type of work in the garden.
- Noticeably shorter cleaning time: powerful air stream allows you to blow away leaves and debris from a large area in a short time.
- Comfortable work without excessive effort: lightweight design and ergonomic placement of handles reduce strain on hands, shoulders and back.
- Order throughout the year: from spring cleaning to winter cleaning around your home or business.
For the owner of a BC 241D, BC 300D or BCi530D 56V cutter, the purchase of this attachment is a logical step - it expands the capabilities of the equipment you already have and allows you to better utilize the potential of the drive unit.
DMUCHAWA PROVIDER for BC 241D/BC 300D AND BCi530D 56V - DURABILITY AND RELIABILITY IN ANY CONDITION
The attachment was made of high quality, durable materials, resistant to intensive use in garden conditions. The fan housing and long discharge pipe are resistant to mechanical damage typical of working near stones, branches and hard surfaces.
What sets this blower apart in terms of durability?
- Robust housing design protects the mechanism from accidental knocks and vibrations.
- Precise fit of components minimizes air loss and risk of damage from backlash.
- High quality workmanship translates into trouble-free operation for many seasons.
This type of solution will be especially appreciated by people who do cleaning work regularly - not just twice a year, but practically every weekend or after heavy leaf fall.
FAQ - Frequently Asked Questions about the DMHUNTER for BC 241D/BC300D AND BCI530D 56V 61289130
Question 1: Does the kit include a motor or scythe?
Not. Offer applies to blower attachment only. A compatible BC 241D, BC 300D or BCi530D 56V scythe/multifunctional drive unit is required for operation.
Question 2: Do you need special tools to install the attachment?
Not. Quick connect system "no tools" allows installation and removal of the attachment without additional tools. Simply unlock the connector, slide out the previous attachment and insert the blower.
Question 3: What kind of work is this blower best suited for??
The attachment is ideal for blowing off leaves, grass clippings, small twigs, sand and light debris from lawns, sidewalks, driveways, patios and areas around buildings.
Question 4: What are the most important technical parameters of the device?
The blower is characterized by an attachment weight of approx. 1.5 kg, total weight of the machine approx. 5.5 kg, air flow rate 600 m³/hour. and the speed of the air stream 60 m/s.
Question 5: Can the blower handle wet leaves?
Yes, thanks to its high air speed (up to 60 m/s), the blower can also effectively deal with heavier, moist leaves and grass debris, although in some cases a longer air stream may be required.
Question 6: Is the attachment suitable for professional use?
The device's parameters and robust design make the blower suitable for both home gardens and semi-professional cleaning work - for example, around guesthouses, service companies or housing estates.
Question 7: How to take care of the starter to make it last as long as possible?
When you're done, it's a good idea to remove any leftover leaves, dust and other debris from the housing and nozzle. Also, store the device in a dry place, protected from frost and direct sunlight.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.