BOOM EXTENSION FOR BC241D/BC300D AND BCI530D 56V 61289110
- Original Oleo-Mac boom extension 61289110 (75 cm, 0.7 kg) for BC241D, BC300D and BCi530D 56V. Increases working range, safety and comfort for cutting tall hedges and branches. Ideal for trimmers and shears.
Extension arm for BC241D/BC300D and BCi530D 56V 61289110 is a professional attachment that increases the working range of Oleo-Mac scythes and multifunction devices. With a length of 75 cm and a low weight of only 0.7 kg, it significantly increases the comfort and safety of work when trimming high hedges, treetops and hard-to-reach branches - without the need for a ladder.
OFFER APPLIES TO BOOM EXTENSION ATTACHMENT ONLY. PRE-ORDERED FOR BC241D/BC300D and BCi530D 56V. WE INVITE YOU TO OPEN THE TAB RECOMMENDED PRODUCTS AND SEE THE OFFER OF OTHER STARTERS.
By installing a 75 cm long boom, the length of the drive shaft can be increased to reach hedges and branches at a greater height. Recommended for trimmers and hedge trimmers.
Technical specifications:
| Weight | 0.7 kg |
| Length | 75 cm |
Oleo-Mac boom extension 61289110 - what it is and how it works?
Oleo-Mac boom extension 61289110 is a solid aluminum drive tube that is mounted between the drive unit and the work attachment. It is part of the original Oleo-Mac modular system, designed for intensive, long-term use. Thanks to the precise fit and dedicated quick-action connector, installation is quick without the use of specialized tools.
Inside the extension is a drive shaft that transmits power from the engine to the working tool. The design is optimized so that there is no torque drop or vibration - so you are assured that the trimmer or hedge trimmer is operating at full capacity even at maximum extension.
The 75 cm length is a compromise between significantly increasing the working range and maintaining the rigidity and balance of the set. As a result, the tool remains stable and the operator has full control over the cut.
Where do you mount the boom extension for BC241D/BC300D and BCi530D 56V?
The boom extension is designed to work perfectly with drive units Oleo-Mac:
- BC241D
- BC300D
- BCi530D 56V (rechargeable version)
The component is mounted in place of the standard connection between the engine and the work attachment. In practice, this means that:
- you remove the current attachment (such as a trimmer or hedge trimmer),
- in its place you introduce boom extension 61289110,
- then at the end of the extension, you mount the work attachment of your choice.
Such a modular system allows you to change the working range of the device in a few moments to match the current tasks. Latching locking mechanisms and pressure bolts ensure a secure, rigid connection, minimizing the risk of backlash or skewing. This allows the operator to work safely and precisely even at high altitude.
In practice, this means that with a single Oleo-Mac MFP you can handle both ground work and activities that require reaching higher up trees and hedges - simply attach or detach the boom extension.
Use of 75 cm extension arm - convenience and safety in any garden
The 75 cm extension arm is particularly recommended for use with the limbing machine and hedge trimmers. It is these tools that most often require a greater working range to effectively reach higher vegetation.
Typical applications include m.in.:
- Crown pruning - without reaching for ladders or work platforms. An operator standing firmly on the ground can safely reach the branches above, significantly reducing the risk of falling.
- Forming tall hedges - Evenly cut the top and front of the hedge without having to move the ladder every day. In practice, it saves time and reduces fatigue.
- Removal of dead and dangerous branches over paths, entrances or playgrounds. Thanks to the extended range, you can quickly eliminate potential hazards without calling a team with a lift truck.
This solution is perfect for both home gardens, as well as in orchards, farms, horticultural companies and in communal areas. Professionals will especially appreciate the high durability of the component and its resistance to overloading during intensive use.
Key benefits of using the Oleo-Mac boom extension 61289110
By choosing the original boom extension for BC241D/BC300D and BCi530D 56V, you gain a number of tangible benefits that translate into comfort and efficiency:
- Increased working range by 75 cm - is often exactly what it takes to reach the tops of hedges or higher tree branches pohodnie. Example: with a hedge of 3 m in height, you can in many cases make the cut while standing firmly on the ground.
- Improving security - Eliminating the need to balance on a ladder minimizes the risk of falling. The operator maintains a natural position, which is especially important during longer tasks.
- Saving time and energy - fewer adjustments of the ladder, faster access to the next fragments of the hedge or tree crown, shorter time of the entire maintenance operation.
- Full compatibility with Oleo-Mac system - The original component ensures a perfect fit with BC241D, BC300D and BCi530D 56V units, which translates into reliability and long life of the whole set.
- Light weight (0.7 kg) - The extension does not put undue strain on the operator's hands or spine, and the entire tool remains well balanced. Even when working for hours, fatigue is noticeably reduced.
- Solid construction - boom is made of durable materials resistant to corrosion and mechanical damage. This is an investment for years, especially in professional applications.
In everyday use, this means that regular maintenance work - such as seasonal pruning of fruit trees or correcting the shape of a hedge - goes more smoothly, with less effort and without the need for additional people.
Technical specifications of Oleo-Mac 75 cm boom extension
The most relevant technical parameters are collected below to help select a product for specific applications:
- Purpose: oleo-Mac BC241D, BC300D, BCi530D 56V drive units
- Product type: boom extension / drive shaft - system attachment
- Extension length: 75 cm
- Weight: 0.7 kg
- Recommended use: trimming machine, hedge trimmer, work at height
- Mounting method: quick-action coupling with locking device and clamping screw
- Powering the set: depends on the drive unit (diesel BC241D/BC300D or battery BCi530D 56V)
Thanks to its compact size, the extension can be easily stored and transported with other attachments. This is especially important for gardening companies that need mobile, yet comprehensive equipment.
Why choose the original boom extension for BC241D/BC300D and BCi530D 56V?
By opting for original Oleo-Mac attachments, you are investing in reliability, safety and full compatibility. Unlike replacements, which often have inferior fit and lower quality materials, the 61289110 extension is specifically designed for BC241D, BC300D and BCi530D 56V units.
This translates into:
- reliable transmission - No backlash or unwanted vibration that can lead to accelerated gear wear,
- longer life of the whole set - All components work together as intended by the manufacturer,
- retention of warranty - The use of original accessories is often a condition for full warranty protection,
- a coherent, professional system of tools - One drive platform, multiple attachments and flexibility in work scheduling.
If you expect your gardening equipment to work smoothly and safely for years to come, boom extension 61289110 will be a natural choice, allowing you to take full advantage of the potential of your drive units.
FAQ - frequently asked questions about boom extension 61289110
Question 1: Does the boom extension fit all models of Oleo-Mac mowers and trimmers?
Not. The extension is designed exclusively for use with drive units BC241D, BC300D and BCi530D 56V. Installation on other models is not recommended, as it may result in improper operation or void the warranty.
Question 2: For which attachments is it best to use the 75 cm extension?
The manufacturer particularly recommends using the extension with a pruning shear and hedge trimmer. It is with these tools that the extra reach is most noticeable and allows you to work comfortably at height.
Question 3: Is it complicated to install the extension?
Not. Boom extension installs in place of standard connection between engine and work attachment. The entire operation usually takes several tens of seconds and does not require special tools - just unlock the connector, slide the extension in and lock the mechanism again.
Question 4: Doesn't the extra boom length cause the tool to lose power?
The 61289110 extension is designed to provide a stable and efficient power transmission. When properly installed and using the original attachments, you will not experience significant power loss compared to operation without the extension.
Question 5: Does the extension significantly increase the weight of the entire set?
At a weight of only 0.7 kg extension does not cause undue strain on the operator's hands. The proper balance of the set ensures that work remains comfortable even during longer tasks.
Question 6: Can the extension be used when working in rain or wet conditions?
The boom itself is made of corrosion-resistant materials, but the general rules for using combustion and battery-powered equipment outdoors should be followed. Working in heavy rainfall is not recommended; after cutting, it is worth drying the metal parts to keep them in impeccable condition for years to come.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.