AIR FILTER BC380-420T SCYTHE 61170016R
- BC380-420T Scythe air filter 61170016R is an original Emak/Oleo-Mac cartridge for BC 250, 270, 300, 320, 380, 420T, HC 265 XP, PPX 270-271 models. Provides engine power, lower combustion and extends the life of the scythe.
What is the BC380-420T 61170016R scythe air filter and why is it so important?
Scythe BC380-420T 61170016R air filter is an original, high-quality consumable component designed for Emak / Oleo-Mac brand scythes and combustion equipment. Its task is to effectively clean the air sucked into the combustion chamber from dust, dust, fine plant debris and sand. As a result, the engine runs clean, maintains full power, uses less fuel and is better protected from premature wear and tear.
Replacing the air filter is one of the simplest yet most important maintenance tasks - neglecting this element leads to a loss of power, increased smoke, trouble firing, and even serious engine failure. The use of the air filter of the BC380-420T 61170016R scythe is therefore an investment in the reliability and longer life of your machine.
Scythe BC380-420T air filter 61170016R - application, compatibility and installation
The presented filter was designed specifically for selected models of petrol scythes and multifunction devices. Below is the full list of models it fits:
Scythe BC380-420T air filter
For models:
BC 250
BC 270
BC 300
BC 320
BC 380
BC 420 T
HC 265 XP
PPX 270-271
The filter is mounted in a dedicated air filter housing, usually located on the side or rear of the engine. Replacement is very simple and does not require specialized tools - just unscrew or detach the housing cover, remove the old filter, clean the chamber of loose debris, and then insert the new cartridge in the same place and close the housing. The entire operation usually takes only a few minutes, and significantly affects the comfort and safety of the engine.
In practice, this means that you can use the same filter both in lawnmowers used for home lawn work and in machines used in service companies, in the care of green areas, roadsides or orchards. One-size-fits-all solution simplifies service and spare parts purchases.
Key features of the BC380-420T 61170016R scythe air filter and user benefits
1. High filtration efficiency
Specially corrugated filter material with a large working area captures even very fine dust and dust particles. This ensures that the engine of your scythe draws in air free of contaminants, resulting in stable operation, even running and protection against seizure. Even when working in dry, dusty areas - such as when mowing roadsides, wastelands or meadows - the filter maintains its effectiveness for a long time.
2. Secure fit to original enclosures
The shape and dimensions of the filter are matched to the factory housings on the listed models of scythes and equipment. Flexible sealing frame fits tightly to the body, minimizing the risk of unfiltered air blowing in. This is especially important when you're working in dense grass, among clippings, pollen and seeds that get into the engine area very easily.
3. Durability and resistance to heavy use
The cartridge is made of materials resistant to vibration, temperature changes and contact with oil and fuel microparticles that naturally occur in the environment of a two-stroke engine. With proper operation and regular purging/cleaning, the filter retains its properties for a long time, reducing the frequency of replacement and lowering equipment maintenance costs.
In practice, this means that seasonal mowing of the entire property, regular maintenance of green areas around the company or utility work is no problem for the filter. Even with intensive daily use, it maintains stable filtration parameters.
Air filter for scythe BC380-420T 61170016R - fuel savings, longer engine life and convenient operation
1. Stable power and easy firing
Clean air is the right fuel-air mixture. The engine with the new filter comes up to speed more easily, does not "choke" when adding gas and maintains an even operation even during long mowing in hot weather. In practice, you gain smoother operation of the machine, the ability to precisely dose power and less operator fatigue.
2. Lower fuel consumption
A clogged, dirty filter causes an enrichment of the mixture, resulting in higher combustion and a decrease in power. By replacing the filter with a new one, you restore proper airflow and optimal combustion. With regular replacement, especially during the busy season, the difference in fuel consumption can be noticeable after just a few hours of equipment operation.
3. Less risk of costly repairs
Dust and sand particles act as an abrasive in the engine - accelerating the wear of the cylinder, piston and rings. The use of a proven filter significantly reduces the amount of contaminants entering the drive unit, which extends its service life. That's real savings: less frequent repairs, less equipment downtime, and higher reliability during the hottest part of the season.
Technical parameters and practical operating tips
- Purpose: air filter for petrol scythes and multifunctional devices
- Designation / Product Code: 61170016R
- Filter type: air cartridge in rectangular housing with flexible frame
- Compatible models: BC 250, BC 270, BC 300, BC 320, BC 380, BC 420 T, HC 265 XP, PPX 270-271
- Filtering material: paper / non-woven fabric with increased working surface (corrugated)
- Installation location: air filter housing at the engine (under the protective cover)
- Application: household work, professional gardening services, municipal and forestry work
For best results, it is recommended to check the condition of the filter every few hours of operation in dusty conditions and to replace it at least once a season (or more often for professional, intensive use). Regularly blowing the filter with compressed air or gently tapping it helps extend its life, but visible damage or significant dirt is a signal for immediate replacement.
FAQ - Frequently asked questions about the BC380-420T 61170016R scythe air filter
Question 1: How often should I change the air filter on the BC380-420T lawnmower?
Answer: The frequency of replacement depends on the intensity of work and environmental conditions. For backyard applications, it is recommended to replace at least once a season. For professional work, in high dust (roadsides, meadows, wasteland), the filter is worth checking every few hours and replacing even several times a season when it is visibly dirty or damaged.
Question 2: How do I know that the filter is already to be replaced?
Answer: Symptoms of a worn or clogged filter are a decrease in power, difficulty firing, uneven operation at high revs, increased smoke plume, and visible dirt that cannot be removed with a simple blowout. If the filter is rubbed, crumpled or the seal is damaged - replace it immediately.
Question 3: Does the installation of air filter 61170016R require special tools?
Answer: No. On most models, simply unscrew or unfasten the filter housing cover, remove the old cartridge, clean the chamber of loose debris and insert the new filter in the same place. The entire process takes a few minutes and can be done by any user, following the device's instruction manual.
Question 4: Can I clean this filter and use it again?
Answer: It is acceptable to gently blow the filter with compressed air from the outside to the inside, or to lightly tap it to remove loose dirt. It is not recommended to wash the filter in water or use aggressive chemicals. If the filter is heavily soiled or damaged, it should be replaced with a new one.
Question 5: Will this filter fit other models than those listed?
Answer: Scythe BC380-420T 61170016R air filter is designed for specific models: BC 250, BC 270, BC 300, BC 320, BC 380, BC 420 T, HC 265 XP, PPX 270-271. Installation in other devices is possible only if their manufacturer has provided for an identical cartridge. For engine safety, it is always a good idea to check the markings in the owner's manual or on the old filter.
Question 6: What benefits will I get by using the original filter instead of a cheaper substitute?
Answer: The original filter guarantees a proper fit in the housing, high filtration efficiency and durability of the material. As a result, the engine is better protected, runs more evenly, there are fewer firing problems, and the risk of a costly overhaul of the drive unit is significantly reduced. This is an investment that realistically extends the life of the equipment and increases its reliability in operation.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.