AIR FILTER KIT SPARTA 25/250 61162017A
- Original SPARTA 25/250 61162017A air filter kit for Oleo-Mac Sparta lawnmowers. Provides effective filtration, engine protection, easy installation and full compatibility with Sparta 25/250/26TR models.
SPARTA 25/250 AIR FILTER KIT 61162017A is a complete, original set of air filter housing and attachment parts for popular Sparta series lawnmowers and trimmers. It is responsible for the effective cleaning of the air supplied to the carburetor and the tight, secure attachment of the filter, which directly contributes to the life and reliability of the two-stroke engine. The use of a suitable dedicated air filter set minimizes the risk of contaminants entering the cylinder, reduces fuel consumption and allows stable operation of the device in both domestic and professional conditions.
Air filter set for Sparta models of petrol cutters
Air filter set for models:
- Sparta 25
- Sparta 25S
- Sparta 25TR
- Sparta 250S
- Sparta 250TR
- Sparta 250T
- Sparta 26TR
The SPARTA 25/250 air filter kit was designed specifically for the above models of petrol cutters, so you are assured of full compatibility and easy installation. Dedication to specific models means perfect fit of plastic parts, proper air routing, and seamless compatibility with the original filter and carburetor. Whether you use your scythe occasionally on a small plot of land or daily in a service job, the right air filter kit ensures that your engine runs safely and maintains operating power at a consistently high level.
What is and what does the SPARTA 25/250 61162017A air filter kit consist of??
SPARTA 25/250 AIR FILTER KIT 61162017A is a complete housing with fasteners and control lever, designed to attach the air filter to the Sparta series lawnmowers. This is the operating part that is responsible not only for holding the sponge or filter cartridge itself, but also for precisely directing the airflow to the carburetor and switching the starting modes (suction, start, run) depending on the design of the device.
The set includes m.in.:
- half of the filter housing - stabilizing the filter and shielding it from mechanical damage,
- the inner element with an airflow socket - with an inlet hole matching the carburetor stub,
- adjustment lever - used to set the suction/start/run position (RUN, START, CHOKE markings),
- mounting sockets and mounting points - for quick installation on the engine.
For example, in daily use when mowing dense, dusty grass or weeds near a dirt road, it is the kit that keeps the filter in position, preventing unfiltered air from being drawn in, and the lever allows you to start a cold engine smoothly, reducing the number of starter pulls.
Where the SPARTA 25/250 61162017A air filter kit is installed?
The SPARTA 25/250 61162017A air filter kit is mounted directly on the engine body, in the place provided by the manufacturer of the combustion cutter at the factory - between the carburetor and the outer part of the machine housing. This is the air intake zone, which is why it is so important to precisely fit the components and keep the whole system airtight.
Installation is usually done in a few simple steps:
- Removal of old, damaged or worn out filter housing.
- Cleaning the adhesion surfaces on the carburetor and engine body.
- Installing a new SPARTA 25/250 61162017A air filter kit according to the factory mounting points.
- Placing the filter cartridge (sponge or other filter) inside the new housing.
- Checking the correct operation of the suction lever and the RUN/START/CHOKE position.
In practice, this means that even a user without a lot of service experience is able to replace this component on his own in the conditions of a home workshop. For example, after the mowing season, you can replace the damaged housing in a few minutes, so that your scythe will be ready to work at the first spring garden cleanup.
Use of SPARTA 25/250 air filter set in daily operation
The use of SPARTA 25/250 AIR FILTER KIT 61162017A is closely related to the protection and efficiency of two-stroke engines in Oleo-Mac/Sparta lawnmowers. Its main tasks are:
- maintaining the purity of the air drawn into the combustion chamber,
- protecting the interior of the engine from dust, dust, fine grass and sand,
- ensuring proper airflow and proper fuel-air mixture,
- facilitate starting by proper operation of the suction lever.
In practice, this means stable speeds, less risk of the machine going out while mowing, and lower fuel consumption. When mowing overgrown ditches by the roadside, caring for large green spaces around the house or regular maintenance of green spaces by service companies, a well-functioning air filtration system allows you to work long hours without interruption for unplanned repairs.
The most important benefits of using the original Sparta 25/250 61162017A air filter kit
By choosing an original SPARTA 25/250 61162017A air filter kit, you are investing in the durability and reliability of your equipment. From the end user's point of view, there are several key benefits:
- Higher engine life - Effective air filtration minimizes the entry of contaminants into the cylinder, which reduces wear on piston rings and cylinder faces.
- Stable operation in demanding conditions - When mowing wet grass, dirt or near curbs, a well-functioning filter helps keep the speed even and prevents the engine from throttling up.
- Saving time and service costs - simple, do-it-yourself replacement of the filter housing reduces equipment downtime and service visits.
This gives the private user the confidence that his or her scythe can handle any seasonal challenge, while the professional gardener gets a reliable tool for the daily, intensive work of maintaining green spaces, roadsides or parks.
Why choose an original air filter kit for Sparta scythes?
Original air filter set SPARTA 25/250 61162017A is a product tailored to specific models of scythes, with all the technical parameters provided by the manufacturer. This means that the geometry of the air ducts, wall thickness, type of plastic and precision of manufacture meet the factory requirements. Using substitutes of uncertain origin can lead to leaks, poor fit and deterioration of the combustion process.
Using original parts:
- you maintain the manufacturer's guaranteed level of safety in the operation of the device,
- you minimize the risk of damage from inadequate air supply,
- you provide easy access to the next consumable parts (filter, candle, cables, heads).
This is especially important if you are using a scythe in gainful employment - downtime during the season can mean real financial losses. Replacing the filter housing with an original one is a small cost compared to the potential engine overhaul that might be necessary after prolonged operation with a leaking or damaged filtration system.
Summary of the advantages of the SPARTA 25/250 61162017A air filter kit in daily use
SPARTA 25/250 AIR FILTER KIT 61162017A is an inconspicuous but crucial part of any Sparta series petrol scythe. It provides:
- full compatibility with Sparta 25, 25S, 25TR, 250S, 250TR, 250T, 26TR models,
- easy, intuitive installation possible to do it yourself,
- some protection for the engine from dust, grass and fine dirt,
- stable engine performance and less risk of failure,
- high durability due to the use of high quality materials.
If you want your petrol lawnmower to start without problems, run evenly and serve for many seasons, replacing a worn or damaged air filter housing with a SPARTA 25/250 61162017A kit is one of the easiest, yet most effective service actions you can take.
Key technical and identification information
- Product: Air filter kit
- Purpose: scythes and trimmers of the Sparta series of petrol-driven lawnmowers and trimmers
- Models: Sparta 25, Sparta 25S, Sparta 25TR, Sparta 250S, Sparta 250TR, Sparta 250T, Sparta 26TR
- Product code / external system code: 61162017A
- Functional purpose: air filter housing and mount, suction control element
- Application: garden work, greenery maintenance, municipal work, domestic and professional mowing
FAQ - Frequently asked questions about SPARTA 25/250 61162017A air filter kit
Question 1: Does air filter kit 61162017A fit all Sparta lawnmower models?
No, the kit is for selected models: Sparta 25, Sparta 25S, Sparta 25TR, Sparta 250S, Sparta 250TR, Sparta 250T and Sparta 26TR. Before you buy, it's a good idea to compare the model designation on the unit's nameplate with the list above.
Question 2: Does the kit also include a sponge or filter cartridge?
SPARTA 25/250 61162017A kit is primarily a complete air filter housing and fasteners. The filter cartridge (e.g. sponge) is most often a consumable part sold separately - it is worth buying a new filter if the existing one is worn out or damaged.
Question 3: Is it possible to replace the air filter kit yourself?
Yes, in most cases the replacement is simple and can be done in a home workshop with basic tools. All you need to do is remove the old housing, clean the mounting location, and attach the new kit according to the placement of the factory screws and hooks.
Question 4: How often should you check the condition of the air filter kit?
It is a good idea to check the condition of the filter housing and attachment every time the filter cartridge is inspected or cleaned - at least several times a season. If you notice cracks, deformations or problems with the operation of the suction lever, it is recommended to immediately replace it with a new set.
Question 5: What are the symptoms of damaged air filter housing?
Typical symptoms include: difficulty starting, loss of engine power, rough idling, increased fuel consumption, and visible dirt inside the filter chamber. A damaged or leaking housing can allow unfiltered air to be drawn in, leading to serious engine damage in the long run.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.