AIR FILTER FOR SPARTA 25/250 SCYTHES 61160014AR
- Original air filter Oleo-Mac SPARTA 25/250 61160014AR (replacement. 61160014) for Oleo-Mac / EFCO cutters and trimmers. Effectively traps dust and dirt, protects the engine, provides full power and lower fuel consumption. Perfect fit, quick installation.
Air filter for Oleo-Mac SPARTA 25/250 lawnmowers 61160014AR - maximum engine protection and longer equipment life
SPARTA 25/250 61160014AR air filter is an original filter cartridge designed for Oleo-Mac professional lawnmowers and trimmers and related Emak/EFCO equipment. Its task is to effectively clean the air sucked into the engine from dust, dust, grass and fine debris that arise during intensive work in the garden, orchard or home green spaces. As a result, the engine runs stably, retains full power, uses less fuel and is effectively protected against accelerated wear and tear.
Air filter for Sparta 25/250 lawnmowers
The offered air filter 61160014AR was created from high-quality filter material, resistant to contaminants typical of heavy work in mowing grass, weeds and brush. It was designed specifically for Oleo-Mac's SPARTA series of lawnmowers and trimmers and selected related models, ensuring a perfect fit and quick and trouble-free installation in the original air filter housing.
What is the air filter for Oleo-Mac SPARTA 25/250 61160014AR lawnmowers?
Air filter 61160014AR is an original operating component installed in the intake system of lawnmowers and grass trimmers. Its main function is to stop dust particles, dust, sand, shredded grass and other contaminants before they enter the cylinder and combustion chamber. Made of dense, specially selected filter foam, it is the first line of protection for a two-stroke engine, usually operating in extremely dusty environments.
With the right pore structure, the filter allows air to flow freely while effectively capturing contaminants. This translates into stable RPMs, easy cold and hot firing, and full utilization of the machine's power - important for both amateur users and professional landscaping companies.
Where the SPARTA 25/250 61160014AR air filter is installed?
Air filter 61160014AR is installed in the factory filter housing located on the side of the engine of the Oleo-Mac/EFCO petrol scythe or trimmer. After removing the cover (usually fixed with a single screw or latch), the cartridge is placed directly on the air intake duct, according to the profile of the opening.
A properly installed filter fits snugly into the socket, preventing the intake air from bypassing it. Replacement is quick and uncomplicated - you can do it yourself, without specialized tools, which encourages regular servicing of the equipment. For safety, it is recommended to work with clean gloves and avoid crushing the filter foam to avoid disturbing its structure.
Application - to which models the filter 61160014AR fits?
Air filter 61160014AR is designed specifically for a wide range of lawnmowers and trimmers from Oleo-Mac, EFCO and Emak Group brands. Distinguished by a perfect match to the original case and full structural compatibility. It can be used m.in. in the following models of scythes and devices:
- Oleo-Mac / EFCO 720, 722 S, 726 D, 726 S, 726 T,
- OS 255 (scrubber / rake head unit),
- SPARTA 25, SPARTA 25 D, SPARTA 25 S, SPARTA 25 TR,
- SPARTA 250 S, SPARTA 250 T, SPARTA 250 TR,
- SPARTA 26, SPARTA 26 S, SPARTA 26 TR.
Thanks to such wide compatibility, one type of filter will work well on both the popular, domestic SPARTA 25 lawnmowers and the more powerful, more frequently used SPARTA 250 or 26 models, working, for example, in gardening companies, farms and municipal services.
Oleo-Mac SPARTA 25/250 61160014AR air filter - key user benefits
Using the right original air filter is critical to engine life and reliability. By choosing the 61160014AR model, you gain a number of tangible benefits:
- Effective engine protection - dense filter foam traps even fine dust, protecting the cylinder, piston and rings from scratching and premature wear. This has a direct impact on service costs over the life cycle of the device.
- Stable operation and full power - clean filter ensures even air flow, which translates into correct combustion of the fuel-air mixture, easier starting and even engine operation under load.
- Lower fuel consumption - An efficient intake system allows the engine to run more efficiently, so you use less fuel mixture to do the same job.
- Simple installation and quick replacement - The ideally matched shape of the cartridge allows the filter to be changed in no time, even in field conditions - for example, in the middle of a day's work while mowing vast plots of land or wasteland.
- High durability - the original product designed by the manufacturer of gardening equipment is characterized by tear-resistant material and stable foam structure that can withstand repeated cleaning (depending on the manufacturer's recommendations and working conditions).
In practice, this means that regular replacement of the 61160014AR air filter will keep your lawnmower in excellent condition for seasons to come. This works especially well in intensive applications: mowing home lawns, company grounds, recreational plots, slopes, road lanes, orchards or plantations.
Daily applications of the SPARTA 25/250 filter - comfort in all conditions
The SPARTA 25/250 61160014AR air filter is designed for use in harsh environments where the scythe is exposed to large amounts of dirt. During intensive grass cutting in dry, hot weather, there is a lot of dust and soil particles in the air. In such situations, a suitable filter becomes absolutely essential.
Examples of daily applications:
- regular mowing of the lawn next to the house or on a recreational plot,
- cleaning up overgrown roadsides, slopes and edges,
- maintenance work in orchards, vineyards and plantations,
- maintaining order in green belts between buildings or on company grounds,
- mowing with a hexagonal vein head or cutting disc in high weeds and dense thickets.
In any of these situations, the 61160014AR filter minimizes the risk of engine contamination, so the device remains a reliable tool for both individual users and professionals.
Quality, durability and reliability - original Oleo-Mac / Emak filter 61160014AR
When you choose air filter 61160014AR, you are investing in a part developed directly by the equipment manufacturer, which guarantees:
- full compliance with the design requirements of the engine - adequate permeability, material thickness and shape ensure optimal air supply without the risk of "choking" the drive unit,
- tested materials - The filter foam is resistant to the fuel-oil mixture and typical operating conditions (high temperature, contact with oil, vibration),
- long-term operation - With regular cleaning and replacement according to the manufacturer's recommendations, the filter maintains high efficiency throughout the operating season,
- trouble-free service - by using original parts, you maintain full compliance with service documentation and manufacturer's recommendations, which is important especially for commercially used equipment.
The original filter part number is 61160014AR (also found as 61160014). Choosing the correct number avoids confusion and gives you the assurance that the part will fit 100% on your scythe or trimmer model.
Technical data of air filter for SPARTA 25/250 61160014AR lawnmowers
- Purpose: scythes and petrol trimmers Oleo-Mac / EFCO / Emak
- Product type: air filter (filter cartridge)
- Material: high quality filter foam
- Catalog number / manufacturer code: 61160014AR (interchangeably 61160014)
- Part type: original manufacturer's part
- Compatibility - sample models: 720, 722 S, 726 D, 726 S, 726 T, OS 255, SPARTA 25 D, SPARTA 25, SPARTA 25 S, SPARTA 25 TR, SPARTA 250 S, SPARTA 250 T, SPARTA 250 TR, SPARTA 26, SPARTA 26 S, SPARTA 26 TR
Changing the filter regularly - preferably at the beginning of the season and additionally during intensive work - is one of the easiest and cheapest ways to extend the life of your engine and keep your petrol scythe in full working order.
FAQ - frequently asked questions about SPARTA 25/250 61160014AR air filter
How often to change the air filter in the SPARTA 25/250 lawnmower?
Frequency of replacement depends on the intensity and conditions of operation. For typical amateur use, it is recommended to check the filter every few hours of operation and replace it at least once a season. In very dusty environments (e.g., mowing dry wastelands, roadsides), the filter may need to be replaced or cleaned more often - even several times a season.
Can the filter 61160014AR be cleaned or does it need to be replaced right away?
Many foam filters can be gently cleaned - for example, by blowing with compressed air from a safe distance or by lightly rinsing in the manufacturer's recommended agent. However, if the filter is heavily soiled, deformed or damaged, it is definitely better to replace it with a new original 61160014AR cartridge for the safety of the engine.
How do I know that the filter is suitable for my scythe?
The easiest way is to compare the model of your scythe with the list of compatible devices and check the part number in the manual. If you have an Oleo-Mac lawnmower from the SPARTA 25 series, SPARTA 26 series, SPARTA 250 series or 720/722/726 model, the air filter 61160014AR is provided as a standard original consumable part.
Does using a non-original filter make a difference?
Using a replacement of unknown quality may result in inferior air filtration or reduced air flow. In practice, this means a greater risk of engine damage or a drop in power and starting problems. Original filter 61160014AR guarantees full compliance with the manufacturer's requirements and confident protection of the drive unit.
Does replacing the air filter require a service visit?
Not. Replacing the air filter on SPARTA 25/250 lawnmowers is a simple service that you can easily do yourself. Simply remove the filter housing cover, remove the old cartridge, clean the inside of the housing of loose debris and insert the new 61160014AR filter, then reattach the cover.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.