BLADE 460MM FOR GI48P / GI48T SERIES MOWER 54110015R
- BLADE 460MM FOR GI48P / GI48T series mower 54110015R - original steel cutting blade for garden mowers. Guarantees precise mowing, better grass collection in the basket, less vibration and longer mower life. Ideal for Gi48P and Gi48T models.
460MM BLADE FOR GI48P / GI48T SERIES LAWN MOWER 54110015R - PROFESSIONAL GRASS CUTTING, MAXIMUM LAWN MOWER PERFORMANCE
BLADE 460MM FOR GI48P / GI48T SERIES MOWER 54110015R is a high quality, steel cutting blade designed specifically for the mower series Gi48P and Gi48T. Properly sized and spaced mounting holes guarantee a perfect fit to the device, ensuring even, aesthetic cutting and reliable operation for a long time. This is a key component of any lawn mower - it is responsible for the precision of mowing, the air flow in the housing and the efficient collection of grass into the basket.
The product is mounted in the central part of the mower body, on the working shaft of the engine. With its properly contoured geometry and balance, the blade ensures smooth operation, minimizes vibration and protects the engine and bearings from excessive wear and tear. It is the ideal choice for both home users and for more intensive use in the care of larger green spaces.
Application: replacement of worn, dulled or damaged blade on Gi48P / Gi48T series mowers. The new blade significantly improves the quality of mowing, reduces working time, reduces fuel or energy consumption and reduces the risk of damage to the mower caused by the uneven operation of the old cutting element.
length: 460 mm, width: 51 mm, Ø center hole 10 mm, Ø side hole 8 mm, distance between holes 65 mm; for mower series Gi48P / Gi48T
GI48P / GI48T lawn mower blade 54110015R - precision cutting and greater efficiency for your lawn mower
The key function of the blade on the mower is to precise cutting of blades of grass, and not ripping or tugging them out. The 460mm blade for the Gi48P / Gi48T series is designed so that the cutting edge runs perfectly parallel to the ground, guaranteeing an even lawn height across the entire working width. A length of 460 mm provides an optimal compromise between the width of the mowing belt and the stability of operation and safety.
Thanks to the appropriate hardness of the steel and the possibility of resharpening, the knife retains its sharpness for many mowing cycles. Sharp knife:
- prevents fraying of grass tips, which reduces yellowing and disease,
- reduces mowing time because the mower does not have to pass the same section repeatedly,
- reduces the load on the engine - the mower runs lighter, quieter and more economically.
In daily use, this translates into a an even, well-maintained lawn around the house, on the recreational plot, at the summer house or on the grounds near the company. One pass of the mower is often enough to achieve the effect of an aesthetically pleasing, uniform carpet of grass.
Perfect fit - technical parameters of 460 mm blade for Gi48P / Gi48T series mowers
| Overall length | 460 mm |
| Width | 51 mm |
| Central hole diameter | 10 mm |
| Diameter of side openings | 8 mm |
| Distance between holes | 65 mm |
| Destination | gi48P / Gi48T series mowers |
Such precisely defined parameters minimize the risk of improper installation. Appropriate hole spacing and diameters guarantee that the blade fits tightly to the attachment on the mower shaft, eliminating play and vibration during operation. For the user, this means:
- safer mowing even at higher speeds,
- less wear and tear on transmission components,
- better balance of the entire cutting system.
In practice, when mowing on uneven terrain next to a single-family house or on an allotment, a well-fitted and balanced blade translates into less vibration on the handles, which means greater comfort, especially when using the mower for longer periods of time.
Installation of 460MM blade for GI48P / GI48T mower - quick replacement and safe operation
The blade is mounted directly on the drive shaft of the mower, in the central part of the cutting body. The 10mm center hole works with the main mounting bolt, while the 8mm side holes work with additional pins or set screws, depending on the version of the mower. Such a solution significantly improves the stability of the attachment.
While following basic safety rules, knife replacement is easy and can be made independently in a home garage:
- Disconnect the power supply to the mower (spark plug / power cord).
- Set the mower on its side according to the manufacturer's recommendations.
- Secure the old knife against rotation and unscrew the central screw.
- Remove the worn knife, clean the attachment socket.
- Install a new 460 mm blade according to the mounting direction marking.
- Tighten the fixing screw to the correct torque and check the stability.
Regular inspection of the condition of the blade (cracks, chipping, severe dulling) and its replacement has a direct bearing on the operator safety. For example, when mowing in the garden, where rocks or branches occur, a worn or damaged blade can break and its fragments can be a hazard. A new, full-quality knife minimizes such risks.
Application of the 460MM blade 54110015R - a perfect lawn in every garden
The 460MM blade for the GI48P / GI48T 54110015R series lawn mower will prove its worth wherever it counts aesthetics and even lawn mowing. It is an ideal choice for:
- home gardens ranging from a few hundred to several thousand square meters,
- recreational areas at cottages and ROD plots,
- small corporate areas, around offices, warehouses and service outlets,
- maintenance of green belts at driveways, sidewalks and garden paths.
Thanks to its precise profile, the blade also helps to efficient collection of grass clippings into the basket - a strong air stream is created in the mower housing, which directs the cut blades straight into the basket. In practice, this reduces the need to rake and clean up after mowing, which will be especially appreciated by those mowing large, dense lawns after heavy rainfall or when the grass is growing rapidly.
The new blade also comes in handy when we need to bring a neglected lawn to order before the season. The sharp cutting element handles taller and denser grass faster, reducing the number of passes and saving the user time.
Durability, safety and cost-effectiveness of buying a Gi48P / Gi48T mower blade
By investing in an original knife with the right parameters, you care not only for the aesthetics of the lawn, but also for the life of the mower itself. Robust steel resistant to the impact of stones or branches, proper balance and the possibility of multiple sharpening make the 460MM 54110015R knife a purchase for many seasons.
Compared to cheap, non-original replacements with uncertain dimensions, a dedicated knife:
- reduces the risk of damage to the motor shaft and mower housing,
- ensures stable operation even when mowing for long periods,
- is safer for the user and the environment.
For garden owners, this means lower lawnmower maintenance costs and longer, trouble-free operation of the equipment. In practice, this is one of the most cost-effective investments in garden accessories - a small expense significantly improves the comfort and final appearance of the lawn.
FAQ - Frequently asked questions about 460MM blade for GI48P / GI48T series mower 54110015R
Question 1: Does this blade fit all models of Gi48P and Gi48T mowers?
Yes, the blade was designed for the mower series Gi48P and Gi48T and its dimensions (length 460 mm, corresponding diameters and hole spacing) are adapted to the standard mounting on these models. Before buying, however, it is a good idea to compare the parameters with a previously used knife.
Question 2: How often should you replace the blade on your lawn mower?
Frequency of replacement depends on the intensity of use and operating conditions. When typically mowing a home lawn, it is recommended to checking the condition of the blade at least once a season. If the knife is badly chipped, bent or repeatedly sharpened and has lost its original shape, replace it with a new one.
Question 3: Can the knife be sharpened?
Yes, the 460MM knife can be repeatedly sharpened, remembering to maintain symmetry and balance. It is best to have it done by a professional service or use the right tools. Avoid excessive collection of material so as not to weaken the structure of the knife.
Question 4: How to recognize that a knife needs to be replaced, not just sharpened?
The knife is worth replacing if it has deep nicks, cracks, visible bends or has already been sharpened several times and has lost the original shape of the blades. Symptoms during operation are m.in. strong vibration, louder operation, uneven mowing and jagged grass tips.
Question 5: Can I do the installation of a new knife myself?
Yes, with safety precautions, most users are able to replace the knife themselves. It is crucial to disconnect the power supply to the mower, prevent the old blade from rotating when removing the screws, and tighten the new blade thoroughly. When in doubt, it's a good idea to get help from the service.
Question 6: Will this knife improve the collection of grass in the basket?
Yes, a properly shaped and sharp knife affects the stronger airflow in the mower housing, which greatly improves the transport of grass to the basket. As a result, mowing is more efficient and the lawn remains clean and evenly trimmed.
By selecting 460MM BLADE FOR GI48P / GI48T SERIES MOWER 54110015R, you are investing in reliable, safe and efficient operation of your lawn mower and a perfect looking lawn for many seasons to come.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.