TECOMEC TAP&GO VEIN HEAD BC 32-52 109 MM 50729081
- TECOMEC TAP&GO BC 32-52 109 mm cord head 50729081 - heavy-duty, semi-automatic head for brushcutters. Tap&Go system ensures fast line ejection, high impact resistance and universal M8/M10 threads guarantee comfort, precision and long
TECOMEC TAP&GO BC 32-52 109 MM VEIN HEAD 50729081 - PROFESSIONAL SEMI-AUTOMATIC HEAD FOR PETROL CUTTERS
TECOMEC TAP&GO VEIN HEAD BC 32-52 109 MM 50729081 is a high-quality, semi-automatic cutting head designed for brushcutters and trimmers. Thanks to the system Tap & Go (Bump-N-Work) a light bump of the head against the ground is all it takes to automatically eject a new section of line, without having to turn off the engine or stop working. The 109mm diameter, sturdy housing and the ability to use a variety of line diameters make it an excellent choice for both discerning home users and professional gardening companies.
What is the TECOMEC TAP&GO BC 32-52 109 MM filament head 50729081?
It is interchangeable semi-automatic vein head for petrol scythes, designed for cutting grass, weeds and medium-hard vegetation. A product of the Italian brand Tecomec is characterized by precision workmanship and very good mechanical strength. Thanks to high-quality materials, the drum retains full functionality for many seasons of intensive use.
Where is this vein head mounted?
The TECOMEC TAP&GO BC 32-52 head is mounted on the end of the working shaft of a petrol scythe or trimmer, in place of a standard cutting tool (such as an old head, disc or knife). It is equipped with popular threads M8 M - M10 F x 1.25, which ensures wide compatibility with many models of petrol scythes from different manufacturers. Proper installation consists of placing the head on the shaft and tightening it with the appropriate nut or bolt, according to the device's instruction manual.
Application of TECOMEC TAP&GO BC 32-52 109 MM head 50729081
The head is designed for:
- mowing grass on home lawns, near fences, walls and flowerbeds,
- trimming weeds around trees, posts, paths and curbs,
- maintain order in recreational plots and areas around buildings,
- maintenance work in gardens, orchards and urban green spaces,
- semi-professional and professional applications in gardening, municipal and service companies.
Product description available:
SEMI-AUTOMATIC VEIN HEAD
M8 M - M10 F x1.25
The quality of the material allows it to cut for many seasons. The drum features a very sturdy housing, strong threads and strong plastic and rubber hooks. Ability to use multiple line diameters so that the operator of the petrol scythe can properly select the tool to suit the needs.
Tecomec Tap&Go BC 32-52 vein head - quality and durability for many seasons
Vein head Tecomec Tap&Go BC 32-52 has been designed for users who expect the equipment to be maximum durability and reliability. The body is made of impact-resistant plastic that withstands accidental contact with stones, curbs or tree trunks well. This ensures that the head does not break easily and you can work confidently in demanding terrain.
It features a strong, precision-made thread, which guarantees a secure fit on the shaft of the petrol scythe. This reduces the risk of the head unscrewing during operation and increases the safety of use. Robust plastic and rubber hooks keep the line in the right position, which translates into stable tool operation and even line wear.
The durability of the head means that by investing in this product, you will gain savings of time and money - you don't have to buy new, cheap heads of poor quality every season. This is especially important for professionals and those with large areas to mow.
- Application example: regular mowing of the lawn around the house for several seasons without frequent replacement of the head.
- Application example: cleaning work on a plot with numerous stones - the housing stands up well to accidental impacts.
- Application example: intensive use in a gardening company, where trouble-free operation throughout the season is important.
Semi-automatic Tap & Go system - quick ejection of the line without interruption of work
The biggest advantage of the head Tecomec Tap&Go is semi-automatic line ejection system. When the ends of the line shorten during operation, simply bang the rotating head lightly on the ground. The internal mechanism will automatically eject the correct length of line, and you continue mowing without stopping the engine.
This course of action ensures:
- significant reduction in working time - No need to constantly stop the scythe, put it down and manually extend the line,
- greater comfort - operation is intuitive, so even less experienced users can handle it,
- high cutting capacity - you always work with the optimal line length, which translates into an even and aesthetically pleasing mowing experience.
The Tap & Go system will be especially appreciated by mowing users:
- extensive lawns - Where frequent breaks for line adjustment would significantly increase operating time,
- roadsides, slopes, ditches - difficult, long stretches of terrain that require uninterrupted operation,
- gardens with a large number of obstacles - trees, shrubs, walls, where the line shortens faster than on a level lawn.
Tecomec Tap&Go BC 32-52 109 mm vein head - versatility and convenience of use
Head diameter 109 mm (4 ¼") is the optimal compromise between precision and performance. It allows efficient mowing in both narrow corners and open spaces. The head has been designed for use with internal combustion scythe engines with capacities up to approx. 35 cm³, which includes most of the popular models used in home gardens and small businesses.
Possibility to use different diameters of monofilament (According to the manufacturer's recommendations - typically in the range of approx. 2.0-3.5 mm) makes it easy for you to adapt the tool to the type of work you are doing:
- thin line (e.g. 2.0-2.4 mm) - Ideal for fine grass and precise edge finishing,
- medium line (e.g. 2.4-2.7 mm) - A versatile solution for most backyard applications,
- thicker line (e.g. 3.0-3.5 mm) - for more demanding vegetation, taller weeds and brush.
As a result, one head works well in many everyday scenarios:
- care of the home garden - change the line to a thinner one when you want a delicate finish at flowerbeds and flowerbeds,
- mowing grass on a recreational plot - use a universal line, which can cope with different types of vegetation,
- cleaning up wasteland and overgrown areas - put on a thicker line to more efficiently remove taller weeds and soft volunteer plants.
Technical specifications of TECOMEC TAP&GO BC 32-52 109 MM vein head 50729081
Below is a summary of key product specifications:
- Product type: semi-automatic vein head (Tap & Go / Bump-N-Work)
- Brand: Tecomec
- Model: BC 32-52 BNW 109
- Head diameter: 109 mm (4 ¼")
- Mounting/Thread: M8 M - M10 F x 1.25
- Purpose: lawnmowers and trimmers (recommended for engines up to approx. 35 cm³)
- Type of cutting: cutting line, grass and vegetation of medium hardiness (medium grass)
- Housing: reinforced impact-resistant plastic
- Attachments: plastic-rubber, ensuring secure attachment of the fishing line
- Line advance system: semi-automatic, by banging the head against the ground
- Multiple line diameters can be used: flexible adjustment to the type of work (according to the recommendations of the manufacturer of the scythe and head)
- Anticipated use: home users, gardeners, green maintenance companies, municipal utilities.
User benefits - why choose the Tecomec Tap&Go head?
Choosing a vee head Tecomec Tap&Go BC 32-52 109 mm, you gain a number of specific benefits:
- Time savings: semi-automatic Tap & Go system allows you to eject the line instantly without turning off the engine or putting down the scythe.
- Lower operating costs: durable housing and strong thread guarantee long life of the head, reducing the need for frequent replacements.
- Versatility of application: the possibility of using different line diameters and standard mounting threads make the head fit many models of petrol cutters.
- Convenience and security: stable mounting, sturdy line attachments and a reputable brand ensure safe, predictable operation in all conditions.
- Aesthetic mowing effect: constant, optimum line length allows for an even cutting line and a neat lawn appearance.
The product will work well for people who mow a small garden several times a season, as well as for users who regularly maintain larger green areas. If you want reliability, convenience and speed from your equipment, this vee head will be the right choice.
FAQ - Frequently asked questions about TECOMEC TAP&GO BC 32-52 109 MM filament head 50729081
1. What kind of petrol scythes this head fits to?
The head has popular mounting threads M8 M - M10 F x 1.25, therefore, it is compatible with many models of cutters and petrol trimmers of different brands. Before you buy, it's a good idea to check the manual of the scythe for the type of attachment of the cutting tool.
2. Whether the head is intended for home or professional use?
The TECOMEC TAP&GO BC 32-52 109 mm model will perform well in both domestic applications, as well as in semi-professional and professional. Sturdy construction and high-quality materials make it suitable for gardening companies and municipal utilities.
3. What diameter of fishing line can I use?
The head has been adapted for multiple line diameters (usually in the range of approx. 2.0-3.5 mm - exact values should be adjusted according to the recommendations of the scythe and head manufacturer). This allows you to use a thin line for fine grass or a thicker line for taller weeds and bushes.
4. On what principle does the Tap & Go system work?
The Tap & Go (Bump-N-Work) system is a a semi-automatic line ejection mechanism. During operation, all you have to do is lightly bump the rotating head against the ground - a clutch inside the reel will release the lock and eject a new section of line, which will then be cut to the correct length by the cutter on the cutter guard.
5. Is the head assembly complicated?
Assembly is simple and takes only a few minutes. Just remove the old head, place the new one on the working shaft and tighten it with the appropriate thread (M8 or M10 according to your scythe model). Always perform this operation with the engine off and the spark plug disconnected.
6. Can the head cope with very dense thickets?
The head is mainly designed for grass and vegetation of medium hardiness. For very dense, tough overgrowth, it is recommended to use a metal disc or knife. However, with a thicker line in place, the head copes well with taller weeds, nettles and soft self-seeders.
7. Can the head be used with cordless mowers?
If the battery-powered cutter has a suitable mount (M8/M10 thread) and operating parameters compatible with the head, it is possible to use it. However, be sure to check the device manufacturer's recommendations - most cordless cutters are designed for lighter heads and thinner lines.
8. How to care for the head to serve as long as possible?
After finishing work, it is worth clean the head from grass and soil residues, periodically check the condition of the line hooks and housing and use line of the diameters recommended by the manufacturer. As a result, the head will serve reliably for many seasons.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.