TECOMEC LOAD&GO 2.4 MM Ø109 MM VEIN HEAD 50729004
- TECOMEC LOAD&GO 2.4 mm Ø109 mm 50729004 line head for Oleo-Mac lawnmowers - a professional, durable head with a fast line winding system, ideal for grass and weeds in the garden and around the house.
TECOMEC LOAD&GO 2.4 MM Ø109 MM filament head 50729004 - professional head for Oleo-Mac lawnmowers for fast and comfortable mowing
The Tecomec LOAD&GO 2.4 mm Ø109 mm vein head 50729004 is a high-end, professional cutting head designed for Oleo-Mac petrol cutters. Designed for quick changeover, efficient mowing and maximum durability, it's perfect for both the home garden and intensive work around the house or on the allotment. The LOAD&GO system allows you to instantly wind a new line without dismantling the head - so you save time, work more comfortably and without unnecessary interruptions.
Tecomec LOAD&GO head Ø109 mm
line diameter: 2.40 mm
M8x1.25 LHM
M10x1.25 LHF
Head compatible with Oleo-Mac cutters : BCH 25 S / BCH 250 S / BCH 25 T / BCH 250 T / BCH 25 D / BCH 250 D / BC 241 S / BC 241 T / BC270 S / BC 270 T / BC 300 S / BC 300 T / BC 241
What is Tecomec LOAD&GO 2.4 mm Ø109 mm vein head 50729004?
TECOMEC LOAD&GO 2.4 MM Ø109 MM filament head 50729004 is a complete cutting head mounted on the end of the working shaft of a petrol scythe or brushcutter. Inside it is a drum on which a 2.40 mm diameter cutting line is wound. During operation, the head rotates at high speed, and the extended line cuts grass, weeds and delicate volunteer seeds at curbs, fences or around trees.
This model belongs to the LOAD&GO series - this means that the replacement of the line is done externally, without the need to remove and disassemble the head. Simply pull a section of line through the holes, align the ends, and turn the knob to wind it onto the reel in seconds. This solution will be especially appreciated by users who often mow large areas and do not want to waste time on complicated maintenance operations.
Where the Tecomec LOAD&GO line head is mounted 50729004?
Tecomec LOAD&GO 2.4 mm Ø109 mm head 50729004 is designed to be mounted on Oleo-Mac brushcutters and trimmers. It attaches directly to the unit's bevel gear with threaded ends:
- M8 x 1.25 LHM - left M8 thread,
- M10 x 1.25 LHF - left-hand thread M10.
Thanks to the two most popular types of attachment, the head successfully fits many models of Oleo-Mac cutters, m.in.: BCH 25 S, BCH 250 S, BCH 25 T, BCH 250 T, BCH 25 D, BCH 250 D, BC 241 S, BC 241 T, BC 270 S, BC 270 T, BC 300 S, BC 300 T, BC 241. It is an ideal choice both as a primary head and as a replacement for the factory accessory when the previous head has worn out or become damaged.
The most important advantages and applications of the Tecomec LOAD&GO 2.4 mm Ø109 mm vein head
Tecomec LOAD&GO vein head was developed for heavy daily use. The line diameter of 2.40 mm used provides a very good compromise between cutting performance and durability, allowing comfortable work in home areas, allotments, roadside lanes and around buildings.
Typical head applications:
- grass cutting on home lawns and around flower beds,
- trimming of overgrowth near fences, walls, curbs and paths,
- maintain order around trees, shrubs, posts, gazebos and small garden architecture,
- trimming hard-to-reach places that a mower can't reach - slopes, ditches, spaces near fences, corners of buildings,
- cleaning work at summer houses, recreational areas or rented properties.
Thanks to its sturdy construction and efficient line feeding system, the head will be perfect for the discerning private user as well as smaller landscaping companies.
Tecomec LOAD&GO 2.4 mm Ø109 mm vector head 50729004 - quality, durability and reliability for everyday work
Tecomec brand is an established manufacturer of attachments for scythes, chainsaws and garden equipment. LOAD&GO 2.4 mm Ø109 mm head 50729004 is made of high quality plastic resistant to impact, abrasion and changing weather conditions. As a result, it retains its shape and functionality even during heavy use in tall grass and dense weeds.
Durable M8x1.25 LHM and M10x1.25 LHF threaded mounting reduces the risk of the head coming loose on the gearbox - even at high speeds and prolonged mowing. Stable operation translates into greater user comfort, less vibration transmitted to the hands, and more accurate cutting of plants. This is especially important if you regularly maintain presentable lawns or greenbelts around the house and want to maintain an even, aesthetically pleasing edge.
In practice, this means that the Tecomec LOAD&GO head becomes a reliable tool for many seasons - you do not need to invest in new accessories every year, you just need to replenish the line regularly to enjoy the full functionality of the scythe.
Convenience of use - fast line change and comfort with Tecomec LOAD&GO head
The LOAD&GO system has been developed to make the operation of the line head as simple as possible. In classic designs, replacing the line requires disassembling the head, removing the drum and reassembling all the components, which is often cumbersome. With the Tecomec LOAD&GO 2.4 mm Ø109 mm 50729004, this process has been shortened to a few simple steps performed from the outside.
Such functionality brings real benefits:
- Saving time - During the mowing season, when the grass grows rapidly, any downtime is a nuisance. With LOAD&GO, you gain precious minutes with each changeover.
- No frustration - simple winding mechanism eliminates the problem of misplaced line that wedges inside the head. Even less experienced people can handle the replacement without the help of a service center.
- Greater security - shorter handling time and no need to disassemble the head reduces the risk of losing small parts or misassembling the mechanism, which could cause damage during operation.
In everyday use, this means you can finish mowing around the house, around the garage, along the fence or at the playground more quickly - without unnecessary interruptions for attachment service.
Application in practice - where the Tecomec LOAD&GO head will work best?
Tecomec LOAD&GO 2.4 mm Ø109 mm vein head 50729004 was developed primarily for cutting grass and medium hard weeds. It is perfect for areas where a classic mower has limited access or where there is a risk of damaging the steel blade.
Example applications:
- finishing the edges of lawns after the mower passes,
- mowing along metal fences, nets, clinker walls and concrete edges - the line minimizes the risk of damage to the elements,
- pruning plants against tree trunks, around shrubs, arbors and pergolas, where a metal blade could damage the bark or structural elements,
- maintaining order on recreational plots, around summer houses and service facilities,
- cleaning work on narrow green belts along roads, sidewalks and driveways.
Thanks to its compatibility with popular models of Oleo-Mac lawnmowers, the head will be a suitable solution for both owners of small gardens and users who regularly cultivate larger areas of greenery.
Technical data of Tecomec LOAD&GO 2.4 mm Ø109 mm vein head 50729004
- Manufacturer: Tecomec
- Model: LOAD&GO Ø109 mm, code 50729004
- Type of accessory: vein head for brushcutters and trimmers
- Head diameter: 109 mm
- Line diameter: 2.40 mm
- Type of attachment: thread M8x1.25 LHM and M10x1.25 LHF (left-hand thread)
- Compatibility: oleo-Mac scythes BCH 25 S / BCH 250 S / BCH 25 T / BCH 250 T / BCH 25 D / BCH 250 D / BC 241 S / BC 241 T / BC 270 S / BC 270 T / BC 300 S / BC 300 T / BC 241
- Purpose: cutting grass and medium-hard weeds, backyard work, allotment and light professional applications
- Line winding system: LOAD&GO - fast, external winding without taking the head apart
FAQ - Frequently asked questions about Tecomec LOAD&GO 2.4 mm Ø109 mm vein head 50729004
Question 1: Will the Tecomec LOAD&GO head 50729004 fit my Oleo-Mac lawnmower?
The head is compatible with many Oleo-Mac models: BCH 25 S, BCH 250 S, BCH 25 T, BCH 250 T, BCH 25 D, BCH 250 D, BC 241 S, BC 241 T, BC 270 S, BC 270 T, BC 300 S, BC 300 T, BC 241. If your scythe is on this list and has the appropriate left M8x1.25 or M10x1.25 thread, the head will be suitable. If in doubt, it's a good idea to check the thread designation in the device manual.
Question 2: What line can I use in this head?
Recommended and optimal is a line with a diameter of 2.40 mm. This diameter provides the best compromise between durability and cutting performance. Using a much thicker line can put a strain on the scythe's transmission, while a thinner one will wear out faster when working in thicker grass.
Question 3: Is it complicated to replace the line in the LOAD&GO system?
Not. The LOAD&GO system is designed to make changing the line as easy as possible. Simply measure the appropriate length of line, pull it through the holes in the head, align the ends, and then turn the knob that winds the line onto the drum. The entire operation takes just tens of seconds and does not require removing the head from the scythe.
Question 4: What work is this head best suited for?
Tecomec LOAD&GO 2.4 mm Ø109 mm head 50729004 will work best for mowing grass, medium-hard weeds and trimming in hard-to-reach areas: near fences, walls, around trees and shrubs, and around buildings. It is ideal for home gardens, recreational plots and light cleaning work on service facilities.
Question 5: Is the head durable and resistant to damage?
Yes. The head is made of durable plastic resistant to the impact of pebbles, soil and other debris thrown up during mowing. Robust design and quality workmanship characteristic of the Tecomec brand ensure a long life even with intensive use, provided it is used as intended and the correct diameter of the line is used.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.