4-TOOTH DISC Ø 8"/200 MM 4095681R
- Ø 8"/200 mm 4-tooth blade 4095681R for Oleo-Mac lawnmowers - heavy-duty steel blade for dense grass, weeds and light overgrowth. Ideal for BCH, SPARTA, BC 241 models.
4-tooth disc Ø 8"/200 mm 4095681R is a high quality, steel cutting blade designed for professional and amateur household, agricultural and municipal work. Specifically designed for Oleo-Mac lawnmowers and trimmers, it provides precise, aggressive cutting of dense grass, weeds, young regrowth and light brush where a classic vee head is no longer effective.
The disc is mounted in place of a standard cutting head on the drive shaft of a petrol mower/lawnmower. The center mounting hole allows it to be quickly and stably seated in the machine's handle, guaranteeing secure torque transfer and safe operation even at high speeds.
Application of 4-tooth disc Ø 8"/200 mm includes intensive mowing in backyard areas, recreational plots, gardens, orchards, urban green spaces, along roads and around farm buildings. It is ideal for special tasks - where vegetation is too tall, tough or compacted for the cutting line alone to handle.
4-tooth disc Ø 8"/200 mm
Fits Oleo-Mac lawnmower models: BCH 25 S / BCG 250 S / BCH 25 T / BCH 250 T / BCH 25 D / BCH 250 D / BCH 400 S / BCH 40 T / BCH 400 T / BCH 40 BP / BCH 400 BP / BCH 500 S / SPARTA 250 S / SPARTA 25 / SPARTA 250 T BC 241 S / BC 241 T
Thanks to its robust construction, balance and properly designed four teeth, the 4095681R 4-tooth disc significantly increases comfort and productivity, reducing mowing time and operator fatigue.
Precise cutting and high working efficiency - 4-tooth disc Ø 8"/200 mm 4095681R for Oleo-Mac scythes
The most important advantage of the Ø 8"/200 mm 4-tooth blade is its ability to quickly, cleanly cut even difficult vegetation. Four evenly spaced teeth provide an optimal compromise between aggressiveness and smoothness of operation. In practice, this means that the user can efficiently remove both tall grass and tougher weeds or young offshoots of trees and shrubs.
The disc diameter of 200 mm (8") guarantees a sufficiently wide working belt, which translates into fewer passes over the same terrain. In large areas - such as on meadows, slopes or near fences - the difference in working time can be very noticeable. Sharp cutting edges reduce the phenomenon of "tugging" vegetation, making the cut more even and aesthetically pleasing.
In everyday use, the dial will be great for example:
- tidying up household wasteland before establishing a lawn,
- mowing weeds and volunteer plants along fences, outbuildings or in the orchard,
- cleaning drainage ditches and roadsides from high vegetation.
Compatible with popular models - Oleo-Mac 4-tooth blade for BCH, SPARTA and BC 241 scythes
A great advantage of the presented disc is its wide compatibility with popular models of Oleo-Mac cutters and trimmers. The product fits m.in. for series BCH,SPARTA and BC 241, which makes it a universal choice for many users who own various devices of the brand.
Ø 8"/200 mm 4-tooth disc is designed for installation in the following models:
- Oleo-Mac BCH 25 S, BCG 250 S, BCH 25 T, BCH 250 T, BCH 25 D, BCH 250 D, BCH 400 S, BCH 40 T, BCH 400 T, BCH 40 BP, BCH 400 BP, BCH 500 S,
- Oleo-Mac SPARTA 250 S, SPARTA 25, SPARTA 250 T,
- Oleo-Mac BC 241 S, BC 241 T.
This allows owners of several Oleo-Mac trimmers to use one proven solution on different machines, reducing the need to purchase many different types of blades. The unification of accessories also makes it easier to store, service and plan work in the garden or service company.
In practice, such compatibility works well, for example, in small gardening companies, where one set of discs supports several machines used in rotation by different employees. On farms or orchards, in turn, this allows equipment to be quickly rearmed depending on whether more gentle grass cutting or more aggressive brush removal is needed.
Easy installation, safety and durability - advantages of the Ø 8"/200 mm 4-tooth disc in daily use
The Ø 8"/200 mm 4-tooth disc is designed to make installation as simple and intuitive as possible. The standard mounting hole works with Oleo-Mac's factory cutter gears, and the replacement procedure itself is limited to removing the cutter head and inserting the disc along with the appropriate washers and nut. When properly tightened, this ensures stable operation without vibration or backlash.
Made of robust tool steel, it guarantees high resistance to abrasion and impact, such as against stones, hard branches or ground elements. Proper balancing minimizes vibrations transmitted to the handle, so the operator is less fatigued, and machine components (bearings, gearbox, shaft) work under more favorable conditions.
In terms of safety, the user gains the ability to work in difficult terrain without the risk of rapid wear and tear as in the case of a fishing line. The durable blade reduces the need to frequently replace cutting elements during a single day's work, reducing downtime and making it easier to stay focused when mowing large areas.
Examples of daily use:
- regular mowing around the farm - fewer interruptions for changing the line,
- cleaning up plots after winter - quick cutting of woody weeds and undergrowth,
- site preparation for fencing, plantings, garden paths or small architecture.
How and where to mount the 4-tooth disc Ø 8"/200 mm - practical tips for the user
Proper installation of the cutting blade is critical for both safety and productivity. 4-tooth disc Ø 8"/200 mm 4095681R is mounted on the angular gearbox of the cutter, in place of the standard vein head. After removing the guard and unlocking the shaft, remove the existing cutting tool, and then put the disc on the shaft, remembering the correct order of shims and pressure plates provided by the manufacturer of the device.
After tightening the mounting nut, make sure that the disc rotates freely without rubbing against the shield and that there is no perceptible play. Before starting work, it is advisable to carry out a short test in the open air at low speed to check for unusual vibrations.
The blade should always be used with a factory shield suitable for use with metal blades. It is imperative to use personal protective equipment: goggles or visor, gloves, work shoes and leg protection clothing. When working in the vicinity of other people, it is advisable to have an additional cover and to keep an appropriate distance.
In practice, a properly installed and used shield will work well:
- in seasonal work - spring cleanup, summer roadside mowing,
- in intervention work - quick removal of overgrowth before the entry of construction or agricultural equipment,
- in the permanent maintenance of green areas - parks, estate areas, ROD plots.
FAQ - Frequently asked questions about Ø 8"/200 mm 4-tooth disc 4095681R
1. To which scythes the 4-tooth disc Ø 8"/200 mm 4095681R fits?
The blade is designed for Oleo-Mac scythes and trimmers. Fits m.in. for models: BCH 25 S, BCG 250 S, BCH 25 T, BCH 250 T, BCH 25 D, BCH 250 D, BCH 400 S, BCH 40 T, BCH 400 T, BCH 40 BP, BCH 400 BP, BCH 500 S, SPARTA 250 S, SPARTA 25, SPARTA 250 T, BC 241 S and BC 241 T.
2. For what work is it best to use this disc?
The 4-tooth blade works well for mowing dense, tall grass, tough weeds, young regrowth and light overgrowth. It is recommended for neglected plots, wastelands, roadsides, slopes, and for cleaning up areas around farms and orchards.
3. Can the shield be mounted independently?
Yes, installing the disc is easy, as long as you follow the manufacturer's instructions for the Oleo-Mac cutter. Remove the existing head, place the disc on the shaft with the appropriate washers and tighten the retaining nut carefully. Before working, it is a good idea to perform a test at low speed.
4. Whether special protection measures are needed when working with the shield?
Yes. Always wear safety glasses or a visor, gloves, sturdy footwear and long pants when working with a metal cutting blade. It is also advisable to use ear protection and keep a safe distance from other people.
5. How to take care of the shield to make it last as long as possible?
When you're done, it's a good idea to clean the disc of grass and soil debris and inspect the condition of the teeth. Avoid hitting hard obstacles such as stones or metal parts. Storage in a dry place will protect the disc from corrosion and ensure long, trouble-free operation.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.