3-TOOTH DISC Ø 12"/305 MM 4095665BR
- Ø 12"/305 mm 3-tooth disc 4095665BR for Oleo-Mac lawnmowers - strong steel cutting disc for tall grass, weeds and brush. Ideal for BCH, SPARTA, BC, BCF models. High durability, precise cutting.
3-tooth disc Ø 12"/305 mm
Fits Oleo-Mac lawnmower models: BCH 400 S / BCH 500 S / BCH 50 T / BCH 500 T / SPARTA 441 S / BC 400 T / 741 / 746 S / 746 T / 753 T / 755 MASTER / BC 530 S / 530 T / BC 550 MASTER / BCF 430 / BCF530
3-tooth disc Ø 12"/305 mm 4095665BR - what it is and to which Oleo-Mac cutters it fits?
3-TOOTH DISC Ø 12"/305 MM 4095665BR is a high-quality, steel cutting head designed for professional and semi-professional Oleo-Mac brushcutters. A working diameter of 12 inches (305 mm) and three precision-formed tines ensure aggressive and effective cutting even of heavily woody weeds, young shoots, tall grasses and dense thickets. It is the ideal choice for demanding users who want durability, safety and high performance equipment.
The blade has been specially designed to work with selected Oleo-Mac lawnmower models, ensuring correct balance, less vibration and optimal power transfer from the engine to the cutting element. This not only makes the work faster and more accurate, but also less tiring for the operator, which is of great importance for longer mowing sessions on larger areas.
Compatibility with specific scythe models eliminates the risk of selecting the wrong accessory. The 4095665BR blade fits popular Oleo-Mac scythes frequently used in horticulture, agriculture and utility applications, such as but not limited to: BCH 400 S, BCH 500 S, BCH 50 T, BCH 500 T, SPARTA 441 S, BC 400 T, 741, 746 S, 746 T, 753 T, 755 MASTER, BC 530 S, BC 530 T, BC 550 MASTER, BCF 430, BCF 530. This makes it easy to match it to your machine if you are using genuine Oleo-Mac branded equipment.
Where the Ø 12"/305 mm 3-tooth disc 4095665BR is mounted and how it is used in practice?
3-tooth disc Ø 12"/305 mm 4095665BR is mounted on the working head of the Oleo-Mac petrol scythe in place of the classic cutting line. Installation is done on the drive shaft of the unit using the factory mounting hardware - nuts, washers and disc guard. Installation is simple for a user familiar with the operation of petrol cutters, and the exact procedure is described in the manual of the particular cutter.
The three-tooth blade works well wherever a regular line proves too weak. In everyday use, this means you can use it on:
- wastelands and overgrown plots of land - for cutting through tall grass, weeds and young regrowth, which a standard vein head only "jerks" instead of cutting effectively,
- backyard areas - Around properties, fences, outbuildings, where tougher weeds, nettles or volunteer weeds appear,
- orchards and plantations - to maintain order between rows of trees, fruit bushes or vines, especially with heavily sprawling vegetation,
- by roads and drainage ditches - for mowing dense grasses, reeds and plants growing in harder to reach places.
In practice, the disc significantly enhances the capabilities of your petrol scythe - it allows you to perform work similar to light grubbing, which is especially useful for cleaning up neglected areas, recreational plots or areas near fences.
Use of 3-tooth disc Ø 12"/305 mm - when to choose this type of attachment?
Application of 3-tooth disc Ø 12"/305 mm 4095665BR is very wide, making this product great for both the individual user and the professional gardener or service company. Three massive cutting teeth provide high moment of inertia and stable cutting, which translates into efficiency in demanding terrain.
This disc is dedicated to:
- mowing tall, overgrown grass, which is already too stiff for monofilament and requires a more forceful cut,
- removing dense weeds and nettles, as well as thickets composed of plants with thick stems,
- pruning of young woody shoots and volunteer plants with a small diameter, such as birch, willow, blackthorn on the edges of plots and fields,
- maintain order in agricultural and forestry areas, for example, at fire lanes, slopes, field accesses, ditches and roadsides.
Being made of hard tool steel, the disc is resistant to intensive use, while it can be sharpened periodically, further extending its life. It's ideal for those who value economy of use - instead of frequently replacing the line, you benefit from one solid cutting element for a long time.
The most important benefits for the user - quality, durability and reliability of the Oleo-Mac 4095665BR disc
Selecting 3-tooth disc Ø 12"/305 mm 4095665BR, you invest in accessories that stand out for their quality and reliability in everyday applications. From the customer's point of view, the most important are:
- High durability and wear resistance - solid steel, from which the disc is made, guarantees a long life even with intensive use. This is especially important if you regularly work on large areas where the cutting elements are exposed to tougher plants and sometimes stones or twigs.
- Precise and aggressive cutting - three tines with an optimal angle of attack enter the material firmly and evenly, resulting in cleaner mowing and less "tugging" of plants. In practice, this means faster work and a more aesthetically pleasing end result, for example, at the edge of a lawn, at a fence or when rehabilitating an overgrown plot of land.
- Reliable cooperation with Oleo-Mac lawnmowers - The disc is part of the original accessory system, forming a perfect combination with the listed models of scythes. This minimizes the risk of improper installation, reduces vibration and increases safety during operation, which is crucial, especially for users performing long-term gardening jobs.
In everyday use, this translates into better working comfort - less fatigue, less downtime for replacing attachments, and the confidence that the tool can handle even more difficult tasks. For homeowners, farms, service companies or green space managers, this means measurable savings in time and money.
Technical data and compatibility of 3-tooth disc Ø 12"/305 mm 4095665BR
For many users, specific product parameters are key, so the following is a compilation of the most important technical and compatibility information relevant to choosing the right blade for a petrol scythe:
- Product type: cutting disc for petrol scythes
- Design: 3-tooth disc
- Outer diameter: 12" / 305 mm
- Material: high quality tool steel
- Purpose: cutting of tall grass, weeds, thickets, young offshoots of trees and shrubs
- Compatibility - selected models of Oleo-Mac lawnmowers:
- BCH 400 S
- BCH 500 S
- BCH 50 T
- BCH 500 T
- SPARTA 441 S
- BC 400 T
- 741
- 746 S
- 746 T
- 753 T
- 755 MASTER
- BC 530 S
- BC 530 T
- BC 550 MASTER
- BCF 430
- BCF 530
- Manufacturer code/external system code: 4095665BR
- EAN code: 8026619043490
Before you order a shield, it is a good idea to compare the symbol of your device with the above list. If you own one of the listed Oleo-Mac cutters, you can be sure that the disc will fit and ensure proper, safe operation.
FAQ - Frequently asked questions about Ø 12"/305 mm 3-tooth disc 4095665BR
1. To which models of Oleo-Mac lawnmowers the 3-tooth disc 4095665BR fits?
The disc fits the following Oleo-Mac cutter models: BCH 400 S, BCH 500 S, BCH 50 T, BCH 500 T, SPARTA 441 S, BC 400 T, 741, 746 S, 746 T, 753 T, 755 MASTER, BC 530 S, BC 530 T, BC 550 MASTER, BCF 430, BCF 530. If your model is on the list, you can safely use this shield.
2. For what type of work is it best to use a 3-tooth disc Ø 12"/305 mm?
The blade is designed for tasks heavier than ordinary lawn mowing: tall, overgrown grass, dense weeds, nettles, overgrowth and young growth of trees or shrubs. Perfect for cleaning up wastelands, plot edges, areas around farms, orchards and ditches.
3. Can the 4095665BR disc be installed by itself?
Yes, a person with basic knowledge of operating petrol scythes can install the disc by themselves, using the original mounting kit and the scythe manual. However, always follow safety precautions: disconnect the ignition, use protective gloves, and make sure the dial is properly tightened.
4. Can the 3-tooth disc be sharpened?
The disc is made of steel, so it is possible to sharpen it periodically, provided that the correct angle is maintained and the material is removed evenly. It is best to have the sharpening done by someone with experience or a service center, so that the balance of the disc is not disturbed.
5. How to take care of the shield to make it last as long as possible?
After each job, it is a good idea to clean the disc of plant debris, check it for damage, and make sure there are no obvious chips. Store it in a dry place to avoid corrosion, and if necessary, gently protect the surface with a thin layer of technical oil. Regular checks on the condition of the disc and its mounting increase safety and extend the life of the attachment.
6. Is the 3-tooth disc safe to use?
Yes, provided proper installation and use of full protective equipment (goggles or visor, gloves, safety shoes, long pants) and following the procedures described in the scythe manual. Thanks to the fit to specific Oleo-Mac models, the disc works with the device in the manner prescribed by the manufacturer, which increases the safety of work.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.