4-TOOTH DISC Ø 9"/230 MM 4095568BR
- Ø 9"/230 mm 4-tooth disc 4095568BR for Oleo-Mac brushcutters - hardened steel cutting disc for dense grass, weeds and light overgrowth. Ideal for SPARTA, BCH, BC models.
Ø 9"/230 mm 4-tooth disc 4095568BR for Oleo-Mac brushcutters - professional cutting of grass, weeds and dense vegetation
4-tooth disc Ø 9"/230 mm 4095568BR is a high-quality steel cutting wheel for petrol scythes and trimmers, designed for intensive work in the garden, allotment, orchard and municipal grounds maintenance. With four sharp teeth and a diameter of 230 mm, it provides fast, precise and safe cutting of grass, weeds, brush and young shrub growth where the cutting line is insufficient.
What is the Ø 9"/230 MM 4-HANDLE TARGET 4095568BR?
This is a solid metal cutting disc with a diameter of 9" (230 mm), suitable for use with Oleo-Mac petrol cutters. The design of four wide teeth guarantees high cutting performance and long tool life, even with regular use in demanding field conditions.
Where the 4-tooth disc 230 mm 4095568BR is mounted?
The disc is mounted on the cutting head of the petrol scythe, in place of the standard vein head. It is attached to the bevel gear (drive shaft) using the appropriate mounting kit from the scythe manufacturer (thrust plate, nut, spacers, if any). When properly mounted, the shield works with a protective cover designed for metal tools.
Application of 4-tooth disc Ø 9"/230 mm 4095568BR
The shield will be ideal for:
- mowing tall, overgrown grass and tough weeds,
- remove nettles, thistles, bunchgrasses and plants with thick stems,
- pruning light bushes and young shoots of shrubs,
- maintenance of roadsides, ditches, slopes and neglected areas,
- cleaning work on recreational plots, meadows, around farms.
Full product description:
4-tooth disc Ø 9"/230 mm
Fits Oleo-Mac lawnmower models: BCH 25 S / BCH 250 S / BC 25 T / BC 250 T / BCH25 D / BCH 250 D / SPARTA 250 S / SPARTA 25 / SPARTA 250 T / BC 241 S / BC 241 T / BC 270 S / BC 270 T / BC 300 S / BC 300 T / BC 300 D
Oleo-Mac 4-tooth disc 4095568BR 230 mm - maximum mowing performance in difficult conditions
The most important advantage of the disc 4-tooth Ø 9"/230 mm 4095568BR is its ability to effectively mow where a classic monofilament line can no longer cope. Four wide, aggressive teeth bite into dense vegetation, cutting it with a decisive motion, allowing you to quickly clean up even very neglected areas.
Examples of daily applications:
- Large home garden - Instant removal of tall grass near fences, around trees, along the driveway or outbuildings where grass and weeds are extremely dense.
- Recreational plot - cleaning up the land after winter: cutting weeds, thistles and nettles that impede the use of the plot.
- Economic and communal areas - Ongoing maintenance of access roadsides, drainage ditches, slopes or field edges where fast and effective cutting is required.
Compatible with popular Oleo-Mac lawnmower models - secure fit and easy installation
The 230mm 4-tooth blade was designed as an accessory for selected petrol cutters Oleo-Mac, which ensures a perfect fit and trouble-free installation. You don't have to experiment with uncertain replacements - you choose the part designed to work with your machine.
Compatible Oleo-Mac lawnmower models:
- BCH 25 S / BCH 250 S
- BC 25 T / BC 250 T
- BCH25 D / BCH 250 D
- SPARTA 250 S / SPARTA 25 / SPARTA 250 T
- BC 241 S / BC 241 T
- BC 270 S / BC 270 T
- BC 300 S / BC 300 T / BC 300 D
With such wide compatibility, the 4095568BR disc is an ideal choice for both individual users and gardening companies with several different models of the brand's scythes.
Examples of practical use of compatibility:
- Service companies - one blade to fit several models of scythes in the fleet reduces the need to stock many different types of attachments.
- Private users - if you have one of the listed Oleo-Mac cutters, you can be sure that the disc will fit without additional adapters.
- Farmers and fruit growers - the ability to use the same blade on different scythes on the farm reduces downtime and facilitates work organization.
Durable steel and longevity - an investment in reliable cutting attachments
Ø 9"/230 mm 4-tooth disc is made of strong, hardened steel, resistant to deformation and chipping with proper use. The appropriate thickness and weight of the disc guarantee stable rotation, as well as less vibration during operation.
Benefits of choosing a durable steel disc:
- Lower operating costs - with proper care (periodic sharpening of edges), the disc will serve for many seasons, eliminating the need for frequent replacement of accessories.
- Safety of use - Rigid, rugged design reduces the risk of cracking and fragmentation of the disc when working in difficult terrain.
- Consistent cutting quality - Hard steel maintains sharpness better, so mowing remains effective even after many hours of use.
Example usage scenarios:
- Regular mowing around the farm - The shield withstands contact with thicker weeds and regrowth that appear on unused parts of the plot.
- Cleaning up the wasteland - when mowing heavily neglected areas for the first time, the disc copes with stalks that would quickly destroy a regular line head.
- Seasonal work in the orchard - cutting back regrowth, weeds and grasses between tree rows while maintaining a long life of the attachment.
Precision cutting and comfort - how the 4095568BR 4-tooth blade makes everyday mowing easier
With an optimum diameter of 230 mm, the blade provides a very good compromise between cutting performance and tool control. Four tines do not "jerk" vegetation as much as discs with more tines, resulting in smooth, predictable operation, especially in dense grass and weeds.
What you gain in practice?
- Better control over the direction of mowing - can be accurately trimmed along fences, walls and flowerbeds.
- Faster pace of work - Wider cutting range with a single pass than with a monofilament line, especially in tall vegetation.
- Lower operator fatigue - efficient cutting requires fewer repetitions, resulting in shorter working time and less effort.
Examples of use:
- Cutting strips for electric fences - The shield quickly removes vegetation that could cause short circuits.
- Trimming grasses along paths - Even edges and aesthetically pleasing appearance with a minimum number of scythe passes.
- Tidying up slopes and uneven terrain - sure guidance of the disc allows you to maintain a stable work pace even on inclines.
Safety and correct installation of 4-tooth disc Ø 9"/230 mm
Proper installation and use of the 4-tooth disc is a guarantee of safe operation. Disc 4095568BR works with original Oleo-Mac scythe guards and mounting elements, so that all safety standards of the manufacturer are maintained.
Installation and operation recommendations:
- Use only complete, working mounting hardware (thrust plate, nut, washers).
- Before each use, check that the disc is firmly tightened and has no visible damage.
- Always work with a guard in place suitable for metal cutting tools.
- Wear safety goggles, gloves, work boots and pants made of thick material.
- Avoid hitting stones, metal parts of fences, foundations or other hard obstacles with the disc.
Everyday situations where safety is critical:
- Work near buildings - The disc allows effective mowing against walls and walls, but requires care not to hit hard surfaces.
- Maintenance of access road shoulders - The presence of pebbles and gravel requires that the scythe be guided calmly and that a safe distance be kept from bystanders.
- Work on fences and nets - careful handling of the disc minimizes the risk of snagging and damage to the fence.
Technical data of 4-tooth disc Ø 9"/230 mm 4095568BR
- Product type: cutting disc for petrol scythes
- Design: 4 cutting teeth
- Outer diameter: 9" / 230 mm
- Mounting: for the cutting head of Oleo-Mac lawnmowers (using the original mounting kit)
- Material: steel cutting disc (hardened)
- Purpose: grass, weeds, thickets, light shrub regrowth
- Product code/external code: 4095568BR
- EAN code: 5903383006155
- Compatible scythe models: BCH 25 S, BCH 250 S, BC 25 T, BC 250 T, BCH25 D, BCH 250 D, SPARTA 250 S, SPARTA 25, SPARTA 250 T, BC 241 S, BC 241 T, BC 270 S, BC 270 T, BC 300 S, BC 300 T, BC 300 D
FAQ - frequently asked questions about Ø 9"/230 mm 4-tooth disc 4095568BR
Q: For which models of scythes the 4-tooth 230 mm disc 4095568BR fits?
A: Disc fits Oleo-Mac scythes: BCH 25 S, BCH 250 S, BC 25 T, BC 250 T, BCH25 D, BCH 250 D, SPARTA 250 S, SPARTA 25, SPARTA 250 T, BC 241 S, BC 241 T, BC 270 S, BC 270 T, BC 300 S, BC 300 T, BC 300 D. Before installation, it is a good idea to compare the diameter of the mounting hole and the recommendations of the scythe manufacturer.
Q: What work is best to use this disc for?
A: The 4-tooth blade is ideal for mowing tall grass, tough weeds, nettles, thistles, and light overgrowths. It works especially well where the cutting line is too weak, such as in wastelands, near ditches, slopes and around farm buildings.
Q: Can the shield be sharpened?
A: Yes, the edges of the teeth can be sharpened periodically, using a file or a suitable grinder. However, this should be done while maintaining the original tooth geometry and symmetry, so as not to lead to disc unbalance. If in doubt, it is recommended to use the service.
Q: Do I need a special shield to work with this disc?
A: Yes. When working with metal cutting discs, use guards designed for this type of tool. Do not use plastic covers designed exclusively for vein heads.
Q: Is the shield suitable for novice users?
A: The 4-tooth blade can also be used by less experienced users, provided that safety precautions are observed, proper protective measures are used, and the user's manual for the scythe is carefully read. With four teeth, it works relatively smoothly and predictably.
Q: Can the shield handle thick branches?
A: The disc is mainly designed for grass, weeds and light overgrowths. Single, thin outgrowths of shrubs are not a problem, but for cutting thicker branches it is recommended to use special wood blades or circular saws dedicated to petrol scythes.
Q: How to take care of the shield to make it last as long as possible?
A: After finishing work, clean the disc of plant debris and moisture, store it in a dry place, avoid contact with hard obstacles while mowing, and periodically check the condition of the cutting edges. Regular sharpening and inspection of the mounts significantly extend the life of the product.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.