STARTER CORD Ø2.5 MM 100 M 3503121
- Starter cord Ø2.5 mm 100 m 3503121 - professional, heavy-duty starter cord on a spool for lawnmowers, scythes, chainsaws, snowblowers, generators and other combustion equipment, ideal for service and demanding users.
Starter cable Ø2.5 mm 100 m 3503121 is a high-quality, heavy-duty pull cable used in manual starters (starters) of internal combustion engines. It is used to transfer the force from the starter handle to the drum mechanism, allowing the device to start quickly and reliably. Due to its appropriately selected diameter of 2.5 mm and winding length of 100 m, it is ideal for service workshops, garden equipment service companies and demanding individual users.
The product is designed for installation in manual starters of many types of combustion equipment: lawnmowers, mowers, trimmers, chainsaws, soilers, snowblowers, compactors, pumps, generators and other machines equipped with a cable starter. The line is wound on a practical spool, which makes it easy to store, measure and install, and reduces the risk of tangling while working in the workshop.
Durability and reliability of starter cable Ø2.5 mm 100 m 3503121 in daily use
Ø2.5 mm 100 m starter cable 3503121 is designed for intensive use in demanding working conditions. High tensile and abrasion resistance allows for long-lasting use even with frequent engine starts. Adequate elasticity of the cable ensures smooth winding on the starter drum, which minimizes the risk of abrasion and jamming of the mechanism.
With a diameter of 2.5 mm, the cable is an optimal compromise between strength and ease of guidance through the rollers and starter guides. It is strong enough to carry the force needed to start an engine of different capacities, while remaining flexible enough for comfortable use. In practice, this means less risk of breakage during jerking, even when the engine puts up increased resistance after a prolonged stop or operation in difficult conditions.
In everyday use - whether in the amateur garden or in a professional service company - the durable starter cable reduces downtime caused by failures. Instead of frequent replacement of broken cables, the user gains the confidence that the device will start up when it is needed, which is especially important during the season of mowing lawns, forestry work or clearing snow from driveways.
Installation of starter cable Ø2.5 mm 100 m 3503121 - where and how to use it?
Ø2.5 mm starter cable 100 m 3503121 is mounted inside the manual starter housing. One end of it is attached to a spring-loaded drum, the other to a handle that the user pulls when starting the engine. With a standard diameter of 2.5 mm, the cable is compatible with many popular models of starters used in gardening and construction equipment.
The process of replacing the cable involves removing the starter housing, removing the old, worn or broken cable, properly tensioning the drum spring, and guiding the new cable through the guides, holes and handle. We cut the length of the section directly from the spool of 100 m - this allows you to perfectly match it to a specific device, whether it is a small saw, a standard lawnmower, or a larger power generator.
The line finds application m.in. w:
- petrol mowers for home lawns and green spaces,
- lawnmowers and petrol trimmers used to cut weeds near fences and in hard-to-reach areas,
- chainsaws used in orchards, farms and in the forest,
- soilers, scarifiers and other garden machinery,
- diesel snowblowers used in winter to clear driveways and sidewalks,
- generators, internal combustion pumps and other devices with gasoline engines equipped with a cable starter.
Thanks to the use of the line on the spool, it is possible to quickly restore the efficiency of many devices in a short time - just cut the appropriate section, tie the ends and install in the starter. This solution is especially appreciated by services and workshops that service different makes and models of machines.
Ø2.5 mm starter cable 100 m 3503121 - economical solution for service and individual users
The 100m length is a huge advantage of this product. It allows multiple use of the cable when servicing multiple pieces of equipment - in a single workshop, farm or service company. Instead of buying short, individual sections for each repair, the user gets one large reel that will last for numerous replacements. This dramatically reduces the unit cost of each repair and facilitates parts inventory management.
Ø2.5 mm starter cable 100 m 3503121 also helps avoid unplanned downtime. With a full spool at your disposal, you can cut a new section at any time - without having to wait for delivery - and put your equipment back to work. This is especially important for companies that provide gardening, construction or utility services on a schedule, and each hour of machine downtime generates real losses.
Savings can also be seen in the case of individual users who own several combustion devices - such as a lawnmower, chainsaw and snowblower. Instead of buying lines for each separately, you can invest in one professional spool and do the replacement yourself if necessary. It's a simple solution that increases independence and reduces service expenses.
Application and benefits of choosing starter cable Ø2.5 mm 100 m 3503121 in daily operation
Ø2.5 mm starter cable 100 m 3503121 will prove useful wherever reliable engine starting is essential for efficient operation. During the gardening season, it allows lawnmowers and brushcutters to start up quickly even after a long shutdown. On farms and in forestry workshops, it facilitates the daily operation of chainsaws, soilers or branch shredders. In winter, it allows you to easily start the snowblower when the temperature drops below zero, and the device is sometimes started several times during the day.
In professional applications - for example, in municipal service companies that operate a lot of combustion machinery - the 100m starter rope on a spool is becoming an essential piece of equipment for the spare parts store. It allows mechanics to respond quickly to faults and effectively schedule periodic inspections, where cables are replaced as a preventive measure before they break in the field.
In hobby workshops and home garages, the Ø2.5 mm 100 m 3503121 cable gives you the freedom to repair your equipment yourself without having to visit a service center. Replacing the cable is an operation that many do-it-yourselfers can handle - all that is required is a basic set of tools, a moment's patience, and the relevant manual for the device in question. This gives the user more independence and control over the condition of their equipment.
The most important technical advantages and features of the starter cable Ø2.5 mm 100 m 3503121
- Wire diameter: 2.5 mm - universal thickness used in many popular manual starters of combustion equipment.
- Roll length: 100 m - Allows for multiple link replacements on multiple devices, ideal for service and professional applications.
- Form of delivery: line on a spool - easy storage, ability to quickly measure and cut to the required length.
- High mechanical strength - Resistance to stretching and abrasion during intensive use.
- Flexibility and good drum work - Smooth winding, less risk of jams and abrasion in the starter guides.
- Universal application - Lawn mowers, scythes, chainsaws, soilers, snowblowers, generators and many other combustion machines.
- Economical solution - lower unit cost per single wire replacement.
When you choose the starter cable Ø2.5 mm 100 m 3503121 you invest in reliability, comfort and safety at work. Robust workmanship and reusability make it a product that will be perfect for both professional services and the backyard garage of any user of combustion equipment.
FAQ - Frequently Asked Questions about starter cable Ø2.5 mm 100 m 3503121
Question 1: For which devices I can use starter cable Ø2.5 mm 100 m 3503121?
The 2.5 mm diameter cable is used in many standard manual starters of combustion equipment. It can be successfully used in mowers, lawnmowers, saws, soilers, snowblowers, generators and other machines equipped with a cable starter. However, it is always a good idea to compare the diameter of the old cable with the new one to be sure of full compatibility.
Question 2: What length of line should I cut from the spool?
The length of the cable depends on the specific model of the device and the design of the starter. The easiest method is to measure the old cable before replacing it and cut off a new section of the same length. If the old cable is broken, it is a good idea to use the instructions for the device or take a slightly longer section and adjust it during installation.
Question 3: Is it complicated to replace the starter cable?
For most users with basic tools, replacing the cable is a do-it-yourself operation. Requires removing the starter housing, removing the old cable, tightening the drum spring and threading the new cable through the appropriate holes and handle. It is worth following all the steps according to the device manufacturer's instructions to ensure the correct operation of the starter.
Question 4: What is the advantage of buying line in a 100 m spool instead of ready-made short lengths?
The 100 m spool provides a large supply of line, which is enough for many replacements in various devices. It is much more economical per single replacement, plus it ensures that in the event of a sudden breakage of the cable, you always have the repair material on hand. This is ideal for service shops, service companies and users with several combustion machines.
Question 5: How to take care of the starter cable so that it serves as long as possible?
To extend the life of the cable, it is worthwhile to take care of the cleanliness and condition of the entire starter. Avoid jerking violently, banging the handle against the housing, and working in a heavily soiled or dusty environment without periodically cleaning the mechanism. Regular maintenance and care of the guides and starter drum will reduce wear and tear on the cable and allow you to get the most out of its lifespan.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.