STARTER CORD Ø3.0 MM 100 M 3503015
- Professional starter cable Ø3.0 mm (100 m) 3503015 for lawnmowers, chainsaws and brushcutters. Durable, abrasion and weather resistant, ideal for service, gardening companies and demanding users.
Ø3.0 mm starter cable 100 m
SPRING LINK Ø3.0 MM 100 M 3503015 - what it is and why you should choose it?
Starter cord Ø3.0 MM 100 M 3503015 is a high quality, braided starter cord designed for manual starters of combustion equipment. It is an operating component used on lawnmowers, chainsaws, trimmers, soilers, power units and other garden and construction equipment equipped with a "jerk" type manual starter. A diameter of 3.0 mm and a length of 100 m on the spool provide a large supply of line for many replacements, which is especially beneficial for service workshops and users with several machines.
The product is made of durable synthetic fibers with increased resistance to tearing, abrasion and weather conditions. Smooth, even braid ensures smooth operation of the cable in the starter guides, minimizing the risk of jamming and premature wear. Thanks to appropriately selected elasticity, the cable fits well on the starter drum and does not "remember" kinks, which translates into comfort of use and reliable engine starting.
Where the starter cable Ø3.0 MM 100 M 3503015 is mounted? Examples of practical application
The starter cable Ø3.0 MM 100 M 3503015 is installed in the manual starting mechanism of internal combustion engines - in the so-called starter or jerk. One end of the cable is attached to the handle (handle) of the starter, and the other end is attached to the starter drum inside the housing. After the mechanism is assembled and the spring is tightened, the cable winds up on the drum, preparing the device for activation.
Typical places to install the cable are:
- Petrol mowers - Both traditional push mowers and powered models, drum mowers and flail mowers for professional use.
- Chainsaws - petrol saws used in the garden, orchard and forestry work, where a reliable starter is crucial for safety and comfort of work.
- Lawn trimmers and brushcutters - light and heavier backpack scythes, grass and weed trimmers for hard-to-reach areas.
- Rake and scarifiers - machines for loosening soil, growing vegetables, preparing lawns.
- Diesel generators and pumps - devices with manual start, used on construction sites, households and farms.
- Other machines with manual start-up - compactors, power cutters, snowblowers and small construction equipment.
In everyday use, the cable will prove useful wherever frequent engine starting occurs - in service centers, equipment rental, gardening and municipal companies. Thanks to the 100-meter spool, you can conveniently cut sections of the required length for various models of equipment, reducing waste and the cost of buying individual short sections.
Durability, safety and comfort - key features of the 3.0 mm starter cord
Ø3.0 MM 100 M 3503015 starter cable is designed for heavy-duty use. Braided construction of strong fibers provides high resistance to tearing during vigorous jerking, as well as to abrasion from contact with the guides and edges of the case.
Key features that the end user will appreciate:
- High resistance to rupture - Minimizes the risk of failure when least expected, such as when mowing a large area, working on tree felling or powering a house from a generator.
- Weather resistance - The cable is resistant to moisture, temperature changes and UV radiation, so it does not lose its properties during seasonal use of outdoor equipment.
- Flexibility and stable braiding - the cable does not twist and tangle, which translates into smooth operation of the starter and less wear on the guide elements.
In practice, this means greater user safety - the starter operates predictably, without jerks or jams, as well as lower service costs, since the durable cable requires less frequent replacement. This is especially important for professionals who operate multiple machines daily.
Cost-effective solution for services and individual users
Buying a starter cord in a 100m reel is a much more economical solution than buying short, pre-cut lengths. One spool allows you to perform dozens of line changes on different machines, which is ideal for:
- Service and repair shops - the ability to quickly adjust the length of the cable to a specific model of the device, without having to stock multiple variants.
- Garden and construction companies - a constant supply of cables in the workshop or on the service vehicle ensures continuity of work and the possibility of immediate repair of equipment in the field.
- Advanced home users - Owners of several combustion equipment, such as lawnmowers, chainsaws, petrol scythes and snowblowers.
The ability to cut the appropriate section of the cord yourself allows you to accurately match its length to a given starter, which translates into the correct operation of the mechanism: the spring is properly stretched and the cord holder returns to its place without slack or excessive tension.
How to properly select and replace the 3.0mm starter cable on your device?
When replacing the starter cable Ø3.0 MM 100 M 3503015, it is worth following a few simple rules:
- Diameter selection - 3.0 mm diameter wire is one of the more popular solutions, suitable for many small and medium-sized internal combustion engines. However, before replacing it, it is a good idea to verify the device manufacturer's recommendations or compare the new cable with the old one.
- Length selection - The length depends on the design of the starter and the position of the starter handle. The most convenient way is to measure a new cable based on the used one or use the service manual of the machine.
- Assembly - after fixing the cable on the drum and in the holder, the return spring should be properly tightened so that the cable is pulled in smoothly and the holder remains in the resting position against the housing.
In practice, it takes a few minutes or so to replace a worn line with a new one from this spool, and it significantly improves the comfort of the device, making it easier to run even in colder weather.
Application of starter cord Ø3.0 MM 100 M 3503015 in daily work
The starter cable Ø3.0 MM 100 M 3503015 will be used wherever reliability of engine starting is required:
- Garden work - Regular lawn mowing with a petrol mower, edging with a trimmer, cutting branches with a chainsaw.
- Forestry and orchard work - Intensive use of chainsaws in harsh field conditions, where frequent starting and stopping of the engine is the norm.
- Construction and renovation work - Powering power tools and lighting from the generator, starting compactors or power cutters on the construction site.
- Maintenance of the property in winter - Quick start of a diesel snowblower when weather conditions are not conducive to prolonged spinning of the starter.
Thanks to the use of a single, proven 100-meter-long cable, you can organize a "universal stock" in the workshop, from which you will cut sections that fit most of the equipment encountered in service.
The most important benefits for the customer - summary
- Versatility - suitable diameter of 3.0 mm allows to use the cable in many popular combustion equipment of different makes and models.
- High durability - Tear- and abrasion-resistant braid ensures long life even with heavy use.
- Economics - 100 m of line on a spool saves time and money, especially in services and companies with many machines.
- Easy installation - Ability to be cut to any length and easy to attach to most manual starters.
- Reliable engine starting - Comfortable, reliable "jerk" every time, without the risk of sudden line breakage.
FAQ - Frequently asked questions about starter cable Ø3.0 MM 100 M 3503015
Question 1: Will 3.0 mm diameter be suitable for my mower?
Most internal combustion mowers use 3.0 mm diameter cables, but it is worth checking the information in the manual or comparing the new cable with the old one before you buy it. If the existing cable has a similar diameter and moves freely in the starter guides, the Ø3.0 MM 100 M 3503015 model will be the right choice.
Question 2: How many lengths of line can be obtained from one 100 m spool?
Typical cord length on a lawnmower or chainsaw is usually between 1 and 2.5 meters. Thus, from one spool of 100 m, up to dozens of sections can be prepared, depending on the length needed, making this product a very economical solution for service shops and users with multiple machines.
Question 3: Is the starter cable resistant to moisture and UV radiation?
Yes, the rope is made of synthetic fibers with good moisture and UV resistance. As a result, it retains its mechanical properties during outdoor use and is not quickly weakened by exposure to the elements.
Question 4: Can I replace the starter cable myself?
Replacing the starter cable is a service activity that many users perform themselves. This requires basic tools and care when handling the starter spring. If you are inexperienced, it is advisable to have the replacement done by a service technician-especially with more complicated devices.
Question 5: For what equipment, other than lawnmowers and chainsaws, can I use this line?
Ø3.0 MM 100 M 3503015 starter cord will work well on trimmers, tillers, scarifiers, generators, diesel pumps, snowblowers and other small construction equipment with manual starting. The most important thing is that the diameter of the cable should be in accordance with the recommendations of the manufacturer of a particular device.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.