FUEL HOSE Ø3.2 X 6.4 MM - 1M 3502061R
- Fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R is a durable, flexible hose resistant to gasoline and oil, ideal for lawnmowers, chainsaws, lawnmowers, generators and other small engines.
Fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R - precise and safe fuel supply
Fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R is a high quality flexible hose designed for fuel transfer in small internal combustion engines. Thanks to its precise dimensions, durable material and resistance to gasoline and oils, it will be perfect as a fuel system component in garden equipment, construction machinery, agricultural equipment and many other applications where reliability, tightness and safety are important.
The product is offered in a section of 1 meter length, which allows you to conveniently cut the cable to the required length and fit a specific device. Inner diameter of 3.2 mm and outer diameter of 6.4 mm make it ideal for most standard fuel stubs used on small engines.
Fuel hose Ø3.2 x 6.4 mm - 1m
The most important features of the fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R - durability, tightness, chemical resistance
Fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R is designed for long and trouble-free operation in demanding conditions. High quality material provides resistance to gasoline, fuel-oil mixture and typical lubricants used in small two-stroke and four-stroke engines.
The cable is characterized by very good tightness - appropriately selected internal diameter of 3.2 mm allows for a secure fit on the stubs of the carburetor, fuel pump or tank, minimizing the risk of leaks. At the same time, the outer diameter of 6.4 mm ensures proper wall thickness, which translates into mechanical resistance and safety of use.
The hose is flexible, making it easy to guide it into tight spaces and bypass structural obstacles inside the device housing. At the same time, it maintains dimensional stability - it does not collapse, kink or narrow the cross-section under the influence of operating temperature or slight bending, so that the flow of fuel remains undisturbed.
Application examples:
- powering the carburetor in a petrol lawnmower used in a home garden,
- replacing a worn fuel line in a chainsaw used for cutting firewood,
- construction or overhaul of the fuel system in a small generator to power a summer house or workshop.
What is fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R and how it works in the fuel system?
Fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R is a section of flexible fuel tubing designed to safely transport fuel from the tank to the carburetor or fuel pump in small internal combustion engines. It plays a key role in the entire power system - not only the proper operation of the engine, but also the safety of the user and the environment depends on its quality and tightness.
Internal diameter of 3.2 mm ensures proper fuel flow at typical small engine capacities. The cable works with most standard ferrules of similar diameter, used in carburetors, hand pumps (known as pears) and fuel tanks. A section of 1 m gives you the freedom to cut to the required size - depending on the design of the device, the length of the cable can be shorter, which prevents unnecessary sagging and possible abrasion.
In practice, the fuel hose:
- connects the tank spigot to the fuel filter inside the tank and further to the carburetor,
- constitutes a part of the fuel tank venting system,
- can be used to connect the tank to a manual fuel pump or shut-off valve.
Examples of daily use:
- in a petrol lawnmower - a hose leads the fuel from the tank, through the filter, to the carburetor, ensuring stable operation while mowing the lawn,
- in the snowblower - the fuel line is responsible for reliable engine starting even at lower temperatures,
- in small internal combustion sprayers - allows even fuel supply during long-term work in the field or orchard.
Where the fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R is installed? Typical devices and application examples
Fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R is installed wherever a leak-proof, flexible hose is required for the transfer of gasoline or fuel-oil mixture in small and medium-sized internal combustion engines. It is most commonly used in:
- lawn mowers with internal combustion,
- trimmers and lawnmowers,
- chainsaws,
- blowers and leaf vacuum cleaners,
- soilers, scarifiers and other garden machinery,
- small generators and pumps,
- workshop equipment equipped with small internal combustion engines.
Installation of the hose is simple - just cut the hose to the appropriate length and slide it onto the fuel spigots. For devices exposed to vibration and in areas where temperature changes occur, it is recommended to additionally secure with cable ties, which further increases the tightness of connections.
Daily assembly examples:
- replacement of a cracked, hardened hose in a lawn mower that is several years old and begins to "catch left air" and interrupt operation,
- adapting an older chainsaw to work with a new fuel tank with a slightly different spigot arrangement,
- upgrading the fuel system in the mobile generator to improve ergonomics and facilitate access to filters.
Use of fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R in practice - gardening, workshop, agriculture
Fuel hose Ø3,2 x 6,4 mm - 1 m 3502061R is a universal service item, which can be used both in the home garden and in a professional workshop or farm. Its design makes it ideal for:
- repairs and periodic maintenance of gardening equipment - replacing the old fuel line with a new one improves the reliability of starting and stability of engine operation,
- retrofitting and building their own fuel systems - for example, when moving a tank or installing an additional fuel filter,
- create backup service kits in workshops and repair shops - a meter of cable allows you to handle many different models of equipment.
Typical use scenarios:
- in horticulture - quick repair of a petrol scythe before the start of the mowing season,
- in agriculture - replacing fuel supply lines in small engines that drive sprayers or other auxiliary machinery,
- in the workshop - preparation of short lengths of hose as test leads for diagnostics of carburetors and fuel pumps.
Why choose fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R? User benefits
When you choose the fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R, you are investing in the safety and reliability of your equipment. Carefully selected parameters and high quality workmanship translate into real benefits:
- Trouble-free starting and stable engine operation - tight, non-bursting tube guarantees a constant supply of fuel, which eliminates problems with engine stalling or uneven operation.
- Protection against fuel leaks - adequate wall thickness and good adhesion to spigots reduce the risk of leakage and thus fire hazard.
- High resistance to gasoline and oils - the hose does not harden and crack as quickly as hoses made of inferior materials, which prolongs its life.
- Flexibility and easy installation - the cable can be easily routed even in tight enclosures, without the risk of kinking or crushing.
- Versatility of application - the same model of hose can be used in many different devices, which makes shopping and service easier.
Thanks to these features, the fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R is particularly recommended both for individual users who want to service their equipment themselves, and for professional service workshops where repeatable quality and predictable performance of spare parts are important.
Technical data of fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R
- Purpose: fuel hose for gasoline and fuel-oil mixture
- Inside diameter: 3.2 mm
- Outer diameter: 6.4 mm
- Length of the section: 1 m
- Color: black
- Product code/model: 3502061R
- Application: lawnmowers, scythes, chainsaws, generators, pumps, other equipment with a small internal combustion engine
Such selected parameters make the fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R ideally suited to the needs of users looking for a durable and reliable fuel line for many popular garden and workshop machines and equipment.
FAQ - frequently asked questions about fuel hose Ø3.2 x 6.4 mm - 1 m 3502061R
1. What devices can I use this hose for?
Fuel hose Ø3,2 x 6,4 mm - 1 m 3502061R can be used in most small internal combustion engines: lawnmowers, lawnmowers, saws, leaf blowers, soilers, generators and other equipment where the fuel spigots have a diameter close to 3,2 mm.
2. Is the hose suitable for fuel with added oil (two-stroke mixture)?
Yes, the cable is designed to work with both gasoline and the fuel-oil mixture used in two-stroke engines. It is resistant to the typical operating conditions of such mixtures.
3. Can I cut the hose to the correct length myself?
Yes. The hose is supplied in a 1 m section, which can be easily cut with a sharp knife or scissors to the required length. It is recommended to make an even, perpendicular cut to ensure tight seating on the spigot.
4. Are additional clamps needed for installation?
In many cases, simply slipping the hose onto the spigot is sufficient, but for devices subject to strong vibration or high temperatures, it is worth using small hose clamps for added security, which will further protect the connection from unsealing.
5. How to recognize that an old fuel hose needs to be replaced?
If the hose is cracked, hardened, discolored, leaking, or if the engine has trouble running evenly, stalls or is difficult to start, this is a clear indication that the fuel hose should be replaced with a new one - such as model Ø3.2 x 6.4 mm - 1 m 3502061R.
6. Can the hose be used for liquids other than fuel?
The hose is designed primarily for fuel and typical oils used in small engines. Application to other liquids should always be preceded by checking their compatibility with the duct material. If in doubt, it is recommended to use it only as intended - as a fuel line.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.