FUEL HOSE Ø3.5 X 5 MM - 1M 005101079AR
- Fuel hose Ø3.5 x 5 mm - 1 m 005101079AR for small 2T and 4T gasoline engines. Flexible, gasoline resistant, ideal for mowers, lawnmowers, chainsaws, tractors and power units.
Fuel hose Ø3.5 x 5 mm - 1 m 005101079AR - professional fuel hose for gasoline engines
Fuel hose Ø3.5 x 5 mm - 1m is a high-quality flexible hose designed for fuel transfer in light and medium gasoline engine power systems. With a compact 3.5mm inner diameter and 5mm outer diameter, it is ideal for precision installations where tightness, gasoline resistance and convenience of routing wires in tight spaces are important. The 1 m length allows you to easily cut the hose to the required length and match it to your specific device.
Fuel hose Ø3.5 x 5 mm - 1m
The product is designed for users expecting reliability, safety and long life of the fuel system. Carefully selected hose material provides resistance to gasoline and typical operating conditions of garden machinery, workshop equipment and smaller vehicles.
What is fuel hose Ø3.5 x 5 mm - 1 m 005101079AR and how it works?
Fuel hose Ø3.5 x 5 mm - 1 m 005101079AR is a flexible hose made of fuel-resistant plastic, designed to safely and tightly supply gasoline (or fuel-oil mixture) from the tank to the carburetor, fuel pump or injection rail in small internal combustion engines. Its dimensions - an inner diameter of 3.5 mm and an outer diameter of 5 mm - allow it to be installed in standard ferrules used m.in. in lawnmowers, chainsaws, petrol blowers, garden tractors or small generators.
In practice, the hose acts as a channel for transporting fuel under low pressure, ensuring that the medium is kept clean and protected from leaks. The right flexibility makes it easy to guide the cable into tight spaces in the engine compartment, without the risk of kinking or crushing it, which could restrict fuel flow and cause engine problems.
Installation of fuel hose Ø3.5 x 5 mm - 1 m 005101079AR in combustion equipment
Fuel hose Ø3.5 x 5 mm - 1 m 005101079AR installs in fuel systems of small and medium gasoline engines. Typical installation sites include:
- connection fuel tank and carburetor in petrol mowers, lawnmowers and trimmers,
- line from the fuel filter to the carburetor in chainsaws and lopping saws,
- fuel supply in small generators, soilers and snowblowers,
- short lengths of cable on garden tractors, mini vehicles, quads for children,
- smaller workshop applications - such as. test engine supply systems, gravity feed of fuel.
Installation is simple - the hose is slipped onto the stubs of the tank, carburetor or fuel filter, and then secured with the appropriate clamps (depending on the design of the device). With an inner diameter of 3.5 mm, the hose clings to the ferrules firmly and tightly, minimizing the risk of fuel leaks and system air-up.
Unlike haphazardly matched hoses, the dimensionally matched fuel hose 005101079AR maintains proper fuel flow and prevents problems such as engine stalling under load, difficulty starting, or unstable revs. This is especially important during the busy season for gardening machinery, when any downtime means wasted time.
Use of fuel hose Ø3.5 x 5 mm - 1 m in practice
Fuel hose Ø3.5 x 5 mm - 1 m 005101079AR is widely used in many popular home, garden and workshop equipment. Due to its size and resistance to gasoline, it is an ideal solution wherever there is not much fuel flow, but full tightness and reliability of the system is required.
Examples of hose applications:
- Petrol mowers - Feed fuel from the tank to the carburetor, replacing the old, frayed line; improving safety by eliminating micro-leaks.
- Lawnmowers and trimmers - lightweight and flexible hose stands up well to vibrations and frequent changes in the position of the device during field work.
- Chainsaws - a line from the fuel filter to the carburetor, ensuring a stable supply of fuel-oil mixture at high engine speeds.
- Diesel generators and pumps - reliable fuel supply in continuous operation, often for many hours without interruption.
- Small vehicles and garden tractors - Fuel guidance for short distances, in tight spaces of the engine compartment.
With a 1-meter long section, the user can easily cut the hose into several smaller sections - for example, for the carburetor and for the hand pump (primer), depending on the design of the machine. This is a universal solution to have in your home workshop in case of sudden failure of the old fuel line.
Key features and benefits of fuel hose Ø3.5 x 5 mm - 1 m 005101079AR
When selecting a fuel line for your device, it is worth paying attention not only to the dimensions, but also to the performance parameters. Model 005101079AR is distinguished by a set of features that translate into comfortable use and safe operation:
- Precise dimensions - inside diameter approx. 3.5 mm and 5 mm outer for a very good fit with typical fuel spigots on small engines, making installation easier and reducing the risk of leakage.
- Section 1 m - Allows you to cut into several pieces or run a hose in a more complicated route between the tank and carburetor; saves time and money because you don't have to buy several short hoses.
- Fuel resistance - the construction material used is suitable for contact with gasoline and fuel-oil mixtures used in 2T and 4T engines.
- Flexibility and suppleness - makes it easy to route the cable in hard-to-reach places and minimizes the risk of kinking during machine operation.
- Durability - properly installed hose can withstand many seasons of use, as long as it is not exposed to excessive temperatures or mechanical damage.
Thanks to these properties, the product is ideal for both individual users and professional garden equipment service or mechanical workshops. Replacing a worn, cracked hose with a new Ø3.5 x 5 mm fuel hose - 1 m 005101079AR is a simple way to restore the efficiency and safety of your machine.
Why choose fuel hose Ø3.5 x 5 mm - 1 m 005101079AR for your equipment?
Choosing the right fuel line has a direct impact on the trouble-free operation of combustion equipment. Model 005101079AR is the solution for those who want to avoid problems with starting, uneven engine operation or dangerous fuel leaks.
Key user benefits:
- Greater safety at work - tight fuel system minimizes the risk of ignition of leaking gasoline and unpleasant odor in the garage or workshop.
- Fuel savings - No micro leaks means less fuel waste and a cleaner workplace environment.
- Better engine culture - stable fuel feeding promotes steady operation of the drive unit, reduces the risk of stalling and jerking when mowing or cutting wood.
- Easy installation - the hose can be cut with an ordinary cutter, and its flexibility helps in quick connection to existing ferrules and ties.
- Universal application - one product fits many household and gardening machines, so it's worth having in stock.
If you plan to service your equipment before the season or want to restore the efficiency of a long-unused machine, replacing the fuel lines with new ones is one of the basic steps. Fuel hose Ø3.5 x 5 mm - 1 m 005101079AR will allow you to perform this operation quickly and efficiently, without the need for service assistance.
Technical data of fuel hose Ø3.5 x 5 mm - 1 m 005101079AR
- Model/product code: 005101079AR
- Product type: fuel hose / fuel line
- Length: 1 m (can be cut to the required length)
- Inside diameter: about. 3.5 mm
- Outer diameter: about. 5 mm
- Color: black
- Purpose: fuel systems of small gasoline engines (2T and 4T)
- Application: lawnmowers, scythes, trimmers, chainsaws, garden tractors, small power units, workshop equipment
The above parameters make the fuel hose Ø3.5 x 5 mm - 1 m 005101079AR the optimal choice for most popular gardening equipment and small combustion machinery found in households and professional service companies.
FAQ - frequently asked questions about fuel hose Ø3.5 x 5 mm - 1 m 005101079AR
Question 1: Will this fuel hose fit my petrol mower?
Fuel hose Ø3.5 x 5 mm - 1 m 005101079AR fits most lawnmowers where the fuel spigots have a diameter of approx. 3-4 mm. Before buying, it's a good idea to measure the diameter of the old hose or spigots in the tank and carburetor. If they are close to 3.5 mm, the hose will be suitable.
Question 2: Can I use this hose for fuel with oil (2T engines)?
Yes, the fuel hose is designed to work with typical fuel used in small gasoline engines, including the mixture of gasoline and oil used in two-stroke (2T) units, such as in chainsaws or lawnmowers.
Question 3: Can I shorten the hose to the needed length?
Yes, a section of 1 m can be freely cut into shorter pieces with a sharp knife or scissors. It is important that the cut is perpendicular to ensure tight seating on the fuel spigot.
Question 4: How often should the fuel hose in combustion equipment be replaced??
There is no one-size-fits-all value, but with intensive use it is recommended to inspect fuel lines at least once a season. If cracks appear on the hose, it hardens, changes color or smells fuel around the device - it is worth replacing it immediately with a new one, such as model 005101079AR.
Question 5: Is the fuel hose Ø3.5 x 5 mm - 1 m suitable for oil or other technical liquids?
The primary purpose of the hose is to work in gasoline fuel systems. Its use for other liquids (e.g., hydraulic oil, chemical fluids) depends on their chemical composition and requires individual evaluation. For such applications, it is recommended to use cables dedicated by the device manufacturer.
Question 6: Does the hose assembly require additional hose clamps?
For full tightness and safety, it is recommended to use appropriate cable ties or factory clips, especially in areas subject to vibration. In some devices, the flexibility and appropriate diameter of the hose provide a sufficiently secure hold without additional components, but the use of ties further enhances security.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.