PROSINT OLEO-MAC COMPOUND OIL WITH DISPENSER 1 L 001001407A
- Semi-synthetic blend oil PROSINT Oleo-Mac 2T 1 L with dispenser. Ideal for chainsaws, scythes, trimmers and blowers. Proportion of 2% (50:1), low smoke, clean engine and extended equipment life.
PROSINT OLEO-MAC BLEND OIL WITH DISPENSER 1 L 001001407A - PROFESSIONAL 2T OIL FOR DEMANDING USERS
Oleo-Mac PROSINT blend oil with dispenser 1 L 001001407A is a premium semi-synthetic two-stroke engine oil formulated for maximum protection, cleanliness and performance of drive units in horticultural, forestry and construction equipment. Thanks to its precise dispenser and optimized 2% (50:1) formula, the product facilitates the preparation of the fuel-oil mixture, protecting the engine even in difficult operating conditions.
What is PROSINT Oleo-Mac blend oil with 1 L dispenser?
Oleo-Mac PROSINT 2T blend oil is a special semi-synthetic oil developed for the lubrication of high-performance two-stroke engines. The product is designed for the preparation of fuel-oil mixture in the ratio of 2% (50:1). It can be used with both leaded and unleaded gasoline for complete versatility and convenience of use.
The oil formula is designed to not cause the formation of deposits in the combustion chamber and exhaust system, resulting in longer engine life, lower failure rates and less frequent service inspections. Thanks to low emissions and limited consumption, the oil is in line with modern environmental standards, supporting cleaner operation of combustion equipment.
The product exceeds key quality specifications: API TC, JASO FC, ISO-L-EGD, which means it provides a higher standard of engine protection and cleanliness than required by the basic standards. The oil has a characteristic blue-green color, which makes it easier to control the correctness of the prepared mixture. The 1-liter package is equipped with a practical dispenser that makes it easy to measure the right amount of oil.
Where PROSINT Oleo-Mac compound oil 1 L 001001407A is used?
Oleo-Mac PROSINT oil is designed for all high-performance two-stroke engines, used in horticultural and forestry machinery, such as:
- Petrol chainsaws - professional and amateur, used for firewood cutting, carpentry or orchard maintenance work.
- Lawnmowers and trimmers - used for mowing grass, weeds, overgrowth around the house, on plots of land, public areas or service companies.
- Diesel blowers and vacuum cleaners - For removing leaves, small debris and dirt from driveways, sidewalks and green spaces.
- Petrol hedge trimmer - For intensive work in shaping and pruning ornamental shrubs.
- Other 2T equipment - m.in. cutters, pavement cutting, light aggregates, etc., where the manufacturer recommends oil in the API TC / JASO FC / ISO-L-EGD standard.
The oil is not mounted in the device permanently - it is added to the fuel in the correct proportion (2%) to prepare the mixture. The fuel-oil mixture is then poured into the fuel tank of the two-stroke engine. Thanks to the clear graduations on the dispenser bottle, the process of measuring and mixing is quick, easy and safe.
Applications and benefits of Oleo-Mac PROSINT oil
Oleo-Mac PROSINT blend oil with dispenser 1 L is ideal for both individual users and professionals in the gardening, forestry and municipal industries. Its regular use brings a number of tangible benefits:
- Effective engine protection - High-quality oil base and additives create a long-lasting lubricating film that minimizes friction and wear on moving parts such as pistons, rings and cylinders.
- No sludge or carbon deposits - cleaner combustion reduces the formation of carbon deposits on spark plugs, piston and in the exhaust duct, which improves the engine's operating culture and reduces the risk of seizure.
- Low fuel and oil consumption - Optimized 2% blend (50:1) provides proper lubrication with less oil, resulting in savings during heavy use.
- Lower emissions - high quality combustion means less smoke and exhaust odor, which increases operator comfort and reduces environmental impact.
- Easy metering - built-in dispenser allows quick and precise preparation of the mixture for different fuel tank capacities.
In practice, this means that both during seasonal backyard grass cutting and all-day logging work in the forest, equipment lubricated with PROSINT oil maintains full power, operating culture and reliability, and the user minimizes the time spent on the service.
Semi-synthetic blend oil PROSINT Oleo-Mac 2T 1 L - quality that exceeds standards
Oleo-Mac PROSINT 2T blend oil meets and exceeds stringent quality specifications: API TC, JASO FC, ISO-L-EGD. This means that its performance has been confirmed in laboratory and practical tests, and the product provides:
- High thermal stability - the oil retains its lubricating properties over a wide range of temperatures, even during intensive long-term engine loading.
- Shear resistant oil film - the oil film does not tear too quickly, which protects friction parts even at high speeds.
- Minimal smoke - the additives used reduce the formation of smoke, which is especially noticeable when working near buildings, in home gardens or recreational areas.
For the user, this means one 1 L bottle lasts for a long time, and each use of oil translates into a tangible profit: longer machine life, less downtime and lower maintenance costs.
Convenient dispenser in Oleo-Mac PROSINT oil - quick and precise preparation of the mixture
One of the biggest advantages of pROSINT Oleo-Mac compound oil 1 L is built-in dispenser, which significantly facilitates the daily operation of two-stroke equipment. It makes the preparation of the fuel-oil mixture fast, clean and very accurate.
How it works in practice?
- Precise metering - transparent wall and clear graduation on the dispenser chamber allow you to accurately measure the amount of oil needed, for example, for 1, 2, 5 or 10 liters of fuel.
- No mess - no need for additional measuring cups or syringes. Oil is poured from the main chamber into the dispenser by squeezing the bottle lightly, and then poured into the fuel canister.
- Speed of action - the mixture can be prepared directly in the field, such as in the woods, on a plot of land or at a construction site, without the risk of spills or mismeasurement of the amount of oil.
Such a solution makes Oleo-Mac PROSINT oil especially recommended for professionals who prepare the mixture several times a day, and for home users who care about simplicity and safety of use.
Use of Oleo-Mac PROSINT oil in daily operations - examples
Oleo-Mac's PROSINT blend oil is used in many common situations encountered by users of combustion equipment:
- Garden work around the house - Mowing dense, tall grass, trimming hedges, removing brush or small branches. An engine fueled with a PROSINT-based mixture starts more easily, runs evenly and does not smoke excessively, which is important especially near residential buildings.
- Forestry and lumber work - Intensive, all-day cutting of firewood, logs or beams requires oil to be stable and reliable. PROSINT ensures optimal lubrication at high speeds, reducing the risk of seizing the saw.
- Maintenance of communal areas - Companies dealing with urban greenery, parks or cemeteries will appreciate the low emissions and limited smoke, which improves the comfort of working in public spaces.
- Construction and renovation work - for cutters, saws or other 2T equipment used on construction sites, trouble-free and economical operation is key. PROSINT oil helps keep equipment running for a long time.
In each of these scenarios, the use of oleo-Mac PROSINT blend oil translates into real savings - less downtime, fewer repairs, lower fuel and oil consumption, and comfortable, cleaner operation.
The most important technical data of PROSINT Oleo-Mac compound oil 1 L
- Oil type: semi-synthetic, for two-stroke (2T) engines
- Concentration in the mix: 2% - a ratio of 50:1 (50 parts of gasoline to 1 part of oil)
- Purpose of fuel: leaded and unleaded gasoline
- Quality specifications: API TC, JASO FC, ISO-L-EGD
- Properties: no tendency to form deposits, low emissions, reduced wear and tear, high engine cleanliness
- Oil color: blue/green (makes it easier to control the mixture)
- Package Capacity: 1 liter
- Packaging type: bottle with built-in precision dispenser
- Application: chainsaws, scythes, trimmers, blowers, hedge trimmers and other equipment with a 2T engine
- Manufacturer code: 001001407A
- EAN code: 8026619026080
Why choose PROSINT Oleo-Mac blend oil with 1 L dispenser?
Choosing pROSINT Oleo-Mac compounding oil 1 L, you are investing in a product that combines quality, safety and convenience of use. It's an oil designed for professionals, but also perfectly suited for demanding home users.
Key strengths:
- High quality semi-synthetic base - Provides effective lubrication, clean combustion and long-term protection of engine components.
- Exceeds the requirements of standards - meeting API TC / JASO FC / ISO-L-EGD specifications ensures that the product will stand up to intensive professional use.
- Practical dispenser - minimizes the risk of mistake during mixture preparation, saves time and prevents oil spillage.
- Versatility of applications - One oil for a whole range of 2T equipment in the garden, forest and construction sites.
- Economy and ecology - Low emissions, less fuel and oil consumption, less smoke and exhaust smell.
If you care about reliable operation of your equipment, lower service costs and comfort of work, oleo-Mac's PROSINT oil will be an excellent choice for many seasons to come.
FAQ - Frequently asked questions about PROSINT Oleo-Mac compound oil 1 L 001001407A
1. What equipment I can use Oleo-Mac PROSINT oil for?
The oil is designed for all 2T two-stroke engines, m.in. for chainsaws, scythes, trimmers, blowers, hedge trimmers, pruners and other equipment where the manufacturer recommends the use of API TC, JASO FC or ISO-L-EGD specification oil.
2. What is the correct ratio of fuel-oil mixture?
The standard recommended ratio is 2% (50:1), that is, 20 ml of oil per 1 liter of gasoline. However, it is always a good idea to check the instruction manual of a particular device - if the manufacturer provides a different ratio, you should follow it.
3. Is Oleo-Mac's PROSINT oil suitable for unleaded gasoline?
Yes. The oil is suitable for both leaded and unleaded gasoline, so it can be easily used with commonly available fuel from gas stations.
4. Does PROSINT oil reduce smoke and exhaust odor?
Yes. Thanks to its semi-synthetic formula and additives, the oil provides cleaner combustion, which means less smoke, reduced exhaust odor and lower emissions.
5. How to use the built-in dispenser in the bottle?
To use the dispenser, simply squeeze the bottle slightly, pouring oil from the main part into the graduated chamber. When the required amount of oil is in the dispenser, unscrew the cap and pour the oil into the gasoline canister. Then we mix the fuel and we have a ready mixture to pour into the tank of the device.
6. Can the oil be mixed with other 2T oils?
It is not recommended to mix different 2T oils. For full lubricating and protective performance, it is best to use only PROSINT Oleo-Mac oil in a particular device or fuel tank.
7. How to store Oleo-Mac PROSINT oil?
The oil should be stored in in its original, tightly sealed packaging, in a dry, cool and shaded place, away from sources of fire and sunlight. The product should be protected from children.
8. Does oil color matter?
Yes, blue-green color oil makes it easier to visually check the correctness of the mixture preparation - it is easy to see whether the fuel has been thoroughly mixed and whether there is a mixture in the tank and not gasoline alone.
9. Is this oil suitable for four-stroke (4T) engines?
Not. PROSINT Oleo-Mac is an oil exclusively for two-stroke (2T) engines. For four-stroke engines, use the appropriate 4T oils recommended by the equipment manufacturer.
10. Does using Oleo-Mac's PROSINT oil extend engine life?
Yes. Thanks to its effective lubrication, reduction of friction, reduction of carbon build-up and deposits, and clean combustion, pROSINT oil significantly contributes to the extension of engine life, reduce the risk of seizure and reduce service costs in the long run.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.