Cedrus concrete mixer pulley CEDBT160 131905
- Cedrus CEDBT160 131905 concrete mixer pulley - original drive part for Cedrus BT160 concrete mixer. Ensures proper power transfer, stable drum rotation and less belt wear. Ideal for service and reconditioning of concrete mixers.
Cedrus concrete mixer pulley CEDBT160 131905 is an original component of the drive system used in Cedrus BT160 concrete mixers (code CEDBT160). Responsible for the transmission of torque from the engine to the working drum via the V-belt, ensuring smooth and stable operation of the machine at each stage of mortar mixing.
As a Cedrus brand factory replacement part, the 131905 pulley guarantees full compatibility with the concrete mixer's design, proper belt groove geometry, and maintenance of the manufacturer's intended rotation parameters. As a result, the device operates quietly, without jerks, and the risk of failure during intensive construction work is significantly reduced.
Cedrus CEDBT160 131905 concrete mixer pulley - what is this component and why is it so important?
The pulley is a key component of the drive system in a concrete mixer Cedrus BT160. It is mounted on the drive shaft and works with a V-belt that connects the electric motor to the working drum. The proper diameter, shape of the grooves and quality of the pulley's workmanship determine:
- proper power transmission from a 650-watt motor to a 160-liter mixing drum,
- maintaining the correct drum speed (ok. 29.5 rpm./min - depending on the drive configuration),
- vibration and noise reduction during the operation of the concrete mixer,
- reduction of belt and bearing wear thanks to precise guidance of the V-belt in the grooves.
In practice, this means that an efficient pulley keeps the machine running at full capacity, makes it easier to mix heavy cement mortars, plasters or screeds, and makes site work go faster and without unplanned downtime.
Where the Cedrus CEDBT160 131905 pulley is mounted and how it works in the concrete mixer system?
Cedrus 131905 pulley is mounted on the drive axle on the motor or drum side (according to the design of the specific Cedrus BT160 concrete mixer). It forms a pair with a second pulley and a V-belt that connects the two, transferring the drive from the engine to the mixing drum.
In a typical Cedrus CEDBT160 concrete mixer, the layout is as follows:
- 650 W electric motor generates torque.
- The torque goes to pulley 131905, on which a V-belt of appropriate dimensions is seated.
- The belt transmits the drive to the drum pulley or intermediate system, putting the 160-litre drum into rotary motion.
A properly installed pulley ensures stable, repeatable drum operation, which is crucial when preparing homogeneous concrete mixtures. Any wear, breakage or deformation of this component can manifest itself as squealing, belt slippage, a drop in drum speed or even a complete lack of drive.
Examples of situations where proper pulley installation matters:
- at screeding of floors in a single-family house, where long-term, stable mixing of concrete without interruptions is necessary,
- during masonry work in the erection of walls, when a continuous supply of fresh mortar is required,
- during renovations and finishing works, when the concrete mixer is used to prepare lighter adhesive and plaster mortars.
Cedrus CEDBT160 131905 pulley - application, durability and user benefits
Presented cedrus CEDBT160 131905 concrete mixer pulley was designed for intensive use on construction sites, in contractors and semi-professional applications. Its main application areas are:
- genuine spare part for Cedrus BT160 concrete mixer (CEDBT160),
- service and regeneration of the drive in equipment working at construction sites, construction depots, tool rental companies,
- preventive maintenance replacement - For example, when replacing the V-belt, bearings or drive sprocket.
Key user benefits:
- High durability - sturdy material and rigid wheel construction provide resistance to shock loads, vibration and construction dust.
- Hassle-free installation - As a dedicated part for the CEDBT160 model, the pulley fits perfectly with the factory mounts, without the need for modifications or bushings.
- Stable operation of the concrete mixer - The correct profile of the grooves for the belt minimizes the risk of slippage, which is especially important when working with heavy concrete mixtures.
- Saving time and money - replacing only the worn pulley instead of the entire drive train reduces service costs and equipment downtime.
Examples of applications in daily work:
- building a garage or shed, where foundation mortar and masonry are mixed for many hours a day,
- implementation of the shell of a single-family house - continuous mixing of concrete for the footings, columns and rims,
- smaller renovations and adaptations, such as the preparation of subfloors for floors in the basement, workshop or utility rooms.
Cedrus BT160 CEDBT160 131905 concrete mixer pulley - original quality and specifications
By selecting original Cedrus 131905 pulley, you gain confidence that the part has been designed exactly for the BT160 concrete mixer - both in terms of dimensions and strength. This translates into trouble-free operation of the device for a long time.
Key data and product features:
- Purpose: belt pulley for Cedrus BT160 concrete mixer (CEDBT160)
- Type of parts: element of the power transmission system (cooperation with the V-belt)
- Manufacturer Designation: 131905
- REF. NR: 24
- Weight: about. 0.57 kg
- EAN code: 5906434232152
- Color: black
- Construction: multi-ribbed pulley with reinforced (multi-arm) design
The precise fit makes it unnecessary to use compromised replacements that could alter drive ratios, cause excessive belt wear or accelerate bearing wear. For equipment used professionally, the investment in an original part pays for itself quickly - every hour a concrete mixer is out of service on a construction site is a real cost and risk of delays.
How to take care of Cedrus CEDBT160 131905 pulley to extend its life?
To pulley in Cedrus BT160 concrete mixer served for as long as possible, it is worth following a few simple operating rules:
- Regular inspection of the V-belt - A belt that is too loose can slip, causing overheating and rubbing out the wheel grooves, while one that is too tight puts undue stress on the bearings and the disc itself.
- Cleaning the wheel grooves - Cement dust, sand and mortar residue deposited in the grooves reduce adhesion and can act as an abrasive, accelerating belt and wheel wear.
- Avoiding overload - do not exceed the recommended maximum amount of mix in the drum; an overloaded concrete mixer puts a heavy strain on the drive.
- Protection against corrosion and mechanical damage - when you're done, it's a good idea to store the concrete mixer under a canopy and not leave it in a thick layer of mud or concrete.
Thanks to such simple measures, the 131905 pulley will maintain its geometry for a long time and ensure trouble-free operation of the entire drive system.
The most common symptoms of pulley wear in the Cedrus BT160 concrete mixer
Recognizing the right time to replace the pulley helps avoid major failures and downtime. The need for replacement may be indicated by m.in.:
- noisy drive operation, squealing or knocking that occurs when loaded,
- belt slippage despite the correct voltage,
- visible rubbing of the grooves or their inequality,
- disc cracks, deformation or chipping of the material on the edges of the wheel,
- decrease in drum speed - despite a working engine.
In such situations, the installation of a new original cedrus pulley CEDBT160 131905 is the fastest and surest way to restore a concrete mixer to full working order.
Product specification - Cedrus concrete mixer pulley CEDBT160 131905
| Product name | Cedrus concrete mixer pulley CEDBT160 131905 |
| Destination | Cedrus BT160 concrete mixer (CEDBT160) |
| Type of part | Original transmission component |
| REF. NR. | 1ff1de774005f8da13f42943881c655f |
| System code | e4478bfe0ffdb6e6784c6f1868e8d605 |
| EAN code | 8f80eedcb5fd39fdec978a35149a0db0 |
| Weight | 0.570 kg |
| Color | Black |
FAQ - frequently asked questions about Cedrus CEDBT160 131905 pulley
1. Does the 131905 pulley fit all Cedrus concrete mixers?
No, this is a part dedicated primarily to the model Cedrus BT160 (CEDBT160). Before you buy, it's a good idea to compare the markings and REF number. NR. 24 with the technical documentation of its concrete mixer.
2. When it's a good idea to replace the pulley in a concrete mixer?
Replace the pulley when you notice notice noticeable groove wear, disc cracks, uneven drum operation, belt slippage despite proper tension, or suspiciously loud drive operation. Replacement with a new wheel restores stable rotation and reduces further wear and tear on other components.
3. Can I do the pulley replacement myself?
Yes, in many cases, replacing the pulley is possible to do it yourself by an experienced user. However, it is imperative to unplug the unit, remove the drive covers, loosen the belt and follow the manufacturer's service instructions. When in doubt, it is recommended to use an authorized service center.
4. When replacing the pulley, is it worth replacing the V-belt at the same time?
Yes, this is a frequently practiced solution. Since the drive train is already stripped, replacing the belt as well allows you to be sure that the entire drive train is fully operational and ready for intensive work, minimizing the risk of further downtime.
5. How to store a concrete mixer to make the pulley last as long as possible?
It is best to keep the concrete mixer under a roof or in a utility room, avoid prolonged contact with moisture and leaving concrete residue around the drive. Regular cleaning of the guards and checking the condition of the belt positively affect the life of the pulley.
6. Is the Cedrus 131905 pulley an original manufacturer's part?
Yes, designations 131905 and REF. NR. 24 indicate the original component provided by the manufacturer for the Cedrus BT160 concrete mixer. Use of original spare parts guarantees fit and safe operation.
WARRANTY AND SERVICE CONDITIONS
Goods purchased from our store are new and original and come with a full manufacturer's or importer's warranty.
When you buy Cedrus brand products from an official distributor, you get Cedrus manufacturer's full warranty on tools and gardening equipment
Cedrus Warranty
Offered by the Ewimax store - an official distributor of Cedrus tools - are subject to a full manufacturer's warranty, which provides comfort and a sense of security. Whether you choose to purchase online or in a Ewimax stationary store - you are assured of a full manufacturer's warranty.
Cedrus warranty - duration
The standard warranty period for newly purchased Cedrus brand products is 12 or 24 months from the date of purchase. Cedrus warranty period is calculated from the date of sale of the product.
Cedrus warranty 1 year
The standard one-year warranty applies to all Cedrus-branded tools, equipment and machines, available in the stationary store and online store. When you buy Cedrus brand gardening and forestry tools, you are guaranteed a one-year warranty.
Cedrus warranty 2 years
Select Cedrus brand products have an extended warranty period, up to 2 years Cedrus warranty. Detailed information on the length of the warranty period and whether the product has an extended warranty of up to 24 months can be found on the manufacturer's website.
Cedrus warranty terms and conditions
The seller's guarantee covers goods purchased using the Online Ordering System, for which a guarantee document is issued.
Detailed conditions for the implementation of the guarantee are specified in the guarantee form issued by the guarantor and given to the Purchaser at the latest together with the goods.
Complaints are processed and fulfilled only by authorized service points of CEDRUS Dealers
- In the event of a complaint, report the defect to the Seller or Authorized Service Point of the manufacturer of the device in question.
- Detailed Warranty Terms and Conditions can be found in the user manual
Warranty terms and conditions
1. The warranty is provided by Cedrus Joint Stock Company for a period of 24 months from the date of sale for consumer purchases or for 12 months from the date of sale in other cases.
The warranty covers goods/devices purchased on the territory of the Republic of Poland. Entitlements under this warranty do not extend to other claims relating to
damage to the goods/device and claims for loss of profits or incurred costs resulting from damage to the goods/device.
2. For extended warranties of some manufacturers beyond 24 months, annual service inspections are required (annotations in the warranty card):
- weibang mowers 60 months,
- cedrus tractors, Simplicity 36 months,
- ariens zero-turn tractors Edge series 24 months or 150 hours, Ikon Xd 36 months or 300 hours, Apex 48 months or 500 hours (whichever comes first),Zenith 48 months or 750 hours (whichever comes first)
- ferris tractors 24 months unlimited hours, 48 months or 500 hours (whichever comes first). Drive belts, tires, brake pads, batteries, knives
are guaranteed for 90 days. the 2-belt drivetrain used on IS 6200, ISX 3300, IS 3200Z, ISX 2200, IS 2100Z and ISX 800 models is warranted for 36 months or 300 hours (the warranty covers parts and labor in the first year, only parts in the second and third years). Coilover shock absorbers and all suspension related components are warranted for 60 months with no limit on hours.
Knife drive belts on FW35, FM35, SRSZ1 models are warranted for 12 months or 100 hours.
- pubert soilers with Honda engine 60 months,
- cedrus mowers with Kawasaki engine 36 months,
- wiper robotic mowers: Trekker series 72 months (annotated in the warranty card and Wiper service application).
3. For equipment with extended warranties from some manufacturers, the warranty for motors (manufacturer) and gearboxes is 24 months consumer purchase or 12 months in the
other cases.
4. Warranty repair is understood to be activities of a specialized nature appropriate for the removal of a physical defect covered by the warranty.
5. Warranty is not covered:
(a) parts subject to normal wear and tear:
- components of the cutting system (guides, chains, adapters, knives, wheels, discs, drills, grinding wheels, holders of components),
- cables: starter, drive, brake, adjustment cables,
- drive components (clutch drums, clutches drive wheels, drive shafts, pulleys, V-belts and toothed belts, equipment running wheels),
- filters for air, oil, fuel, water, hydraulic fluids,
- spark plugs, ignition wires, springs, rubber dampers, diaphragms, nozzles and carburetor valves,
- electrical wires, brushes, brush-holders, fuses, light bulbs, manual and electric starters.
b) damage resulting from the use of oils other than those recommended by Cedrus Joint Stock Company and the manufacturer (applies to 2-stroke as well as 4-stroke engines).
(c) damage caused by the use of fuel, low-quality mixture.
d) damage that occurred as a result of repairs outside the service network of Cedrus Joint Stock Company.
(e) mechanical, thermal, chemical and all other damages caused by an act or omission by the User.
f) damage caused by natural partial or complete wear and tear in accordance with the characteristics or intended use of the equipment.
(g) damage caused by failure to follow the manufacturer's recommendations from the operating instructions and service messages.
(h) damage resulting from:
- alterations, repairs and structural changes made by the User,
- improper or inconsistent with the instructions for installation, use, lack of care for the equipment (use of non-original materials),
- transportation.
(i) intentional damage to equipment.
(j) maintenance activities - cleaning, replacement of consumables, service inspections.
6. Batteries are guaranteed for a period of 6 months.
7. Repairs and inspections of the equipment should be carried out in the service network of Cedrus Joint Stock Company.
8. The warranty for the parts used in the repair of the so-called "inserted parts" is given for a period of 6 months.
9. The complainant has the right to exchange the goods/device for a new one in the event that the Authorized Service Center determines in writing that removal of the defect is impossible or economically unreasonable.
10. The complainant should deliver the goods/device to the Authorized Service Center. The goods/device under complaint should be complete and in the condition they were in at the time of damage. It should also come in a suitably protective package.
11. The Authorized Service Provider is obliged to consider the legitimacy of the complaint within 14 days from the date of delivery by the Complainant of the goods/device. In the case of recognition of the warranty, the Authorized Service Provider is obliged to perform its obligations within 30 days.
12. The warranty card must be properly filled out. Warranty rights can be exercised only upon presentation by the user of a valid warranty card and proof of purchase. Any arbitrary changes to the entries on the warranty card or making repairs on your own will void the warranty.
13. In the case of a warranty for rechargeable devices, the serial numbers of all components of the set must be entered in the warranty card.
I consent to the processing of my personal data in accordance with the Act of May 10, 2018 on the Protection of Personal Data (Journal of Laws of 2018. Laws of 2018, pos. 1000) and in accordance with Regulation (EU) 2016/679 of the European Parliament and of the Council of April 27, 2016. on the protection of individuals with regard to the processing of personal data and on the free movement of such data and the repeal of Directive 95/46/EC (RODO).