LANCE 130 CM OTH-GSP1874
- Sprayer lance LANCA 130 CM OTH-GSP1874 - lightweight fiberglass tube, Viton seals, adjustable acetal resin nozzle. High chemical and mechanical resistance, universal connector 10 mm, ideal for spraying and disinfection.
LANCE 130 CM OTH-GSP1874 is a high quality spray lance designed for professional and amateur crop protection, disinfection and other precision application work. Thanks to its durable fiberglass tube, high-grade Viton seals and adjustable acetal resin nozzle, the lance provides comfortable, safe and efficient operation in all conditions.
What is the LANCA 130 CM OTH-GSP1874?
This is a professional lance with a length of 130 cm, which works with pressure and cordless sprayers (m.in. pulmic and Keeper brands). The structure was designed for users looking for a compromise between low weight, high mechanical and chemical resistance, and the ability to precisely adjust the spray pattern.
Where the LANCA 130 CM OTH-GSP1874 is mounted?
The lance is mounted directly to the handle/sprayer using a standard 10 mm diameter plastic connector and 18 mm pitch threads. As a result, it can be connected to most sprayers on the market, both horticultural and professional equipment used in agriculture, horticulture, forestry or municipal industry.
Application of Lance 130 CM OTH-GSP1874
The lance is perfect for:
- protective spraying of plants in the garden, orchard and plantations,
- maintenance treatments in green spaces, parks and plant nurseries,
- disinfection of utility rooms, warehouses, greenhouses, film tunnels,
- weed control treatments on sidewalks, driveways and yards,
- spraying of biocides and cleaning agents on outdoor surfaces.
Full product description:
Lance made of high-quality materials that guarantee professional work. Fiberglass pipe is much lighter than brass and more durable than aluminum.
Handle seals are made of Viton. Thread pitch 18 mm. Plastic connector with a diameter of 10 mm, allowing you to connect the lance to any sprayer available on the market.
Adjustable nozzle made of acetal resin (high wear resistance). High mechanical and chemical resistance. The measure of the lance is taken from the handle to the nozzle.
Recommended for Pulmic and Keeper brand sprayers.
LANCE 130 CM OTH-GSP1874 - lightweight and durable fiberglass lance for Pulmic and Keeper sprayers
The most important advantage of the lance LANCE 130 CM OTH-GSP1874 is its construction based on a tube of fiberglass. Compared to traditional brass or aluminum lances, this solution provides a significantly lower weight and greater resistance to mechanical damage. A lighter lance means less arm and hand fatigue, especially when working for hours with a backpack or cart sprayer.
Fiberglass is also a material resistant to corrosion and the effects of many aggressive chemicals, which translates into a longer life of the lance and user safety. This makes the product suitable for both home gardens and professional farms, where spraying is done regularly and on a large scale.
Recommendation for use with sprayers Pulmic and Keeper confirms the professional nature of the lance. This accessory is a popular choice for gardeners, fruit growers, service companies and individual users who care about the quality and reliability of the accessory.
Adjustable acetal resin nozzle - precise and durable spraying in all conditions
The key element of the lance is adjustable nozzle made of high quality acetal resin. This material is characterized by very high abrasion resistance, so that the nozzle retains its geometry for a long time and does not wear out quickly, even with frequent use and work with different working fluids.
The nozzle adjustment allows for a smooth transition from concentrated jet spot to wide mist cone. The user can thus adjust the nature of the spray to suit current needs:
- for spot control of individual weeds or local application of agents - narrow, powerful stream,
- for evenly covering crops or hedges - a wide range of fine droplets,
- for disinfection and fogging of surfaces - fine mist with long reach.
The chemical resistance of the acetal resin means that the nozzle stands up well to contact with many common crop protection products, biocides or cleaning agents. This is an important feature when the lance is used in a variety of applications - from herbicide spraying to disinfectants in farm buildings.
In practice, this means that the user can perform:
- daily garden spraying (vegetable garden, flower beds, lawns),
- professional protective treatments in orchards, tree nurseries and plantations,
- disinfection and decontamination surfaces in warehouses, stables, piggeries, poultry houses or greenhouses.
Universal 10 mm connector and 18 mm thread - easy installation to most sprayers on the market
The 130 CM lance OTH-GSP1874 is equipped with plastic connector with a diameter of 10 mm and 18 mm pitch thread. This is a standard and very popular type of connection, making the lance compatible with many sprayers available on the market, whether handheld, pressure or battery operated.
This solution provides:
- quick and intuitive installation - without the need for special adapters in most cases,
- easy replacement of accessories - If necessary, you can quickly change to another lance or detach it for cleaning,
- flexibility of applications - one lance can be used with several different sprayers on a farm or business.
The universal connector makes the lance a great choice for:
- farmers and fruit growers who use different sprayers depending on the treatment,
- municipal and horticultural companies performing services at a number of clients,
- private users who own one sprayer but are looking for a higher quality lance than the one included from the factory.
Viton seals - high chemical resistance and trouble-free operation
The lance holder is equipped with seals made of Viton - A specialized fluorine elastomer known for its excellent chemical and temperature resistance. The use of such seals significantly extends the life of the lance, especially when working with more aggressive chemicals.
The benefits of using Viton seals are m.in.:
- less susceptible to swelling and cracking under the influence of chemicals,
- stability of parameters over a wide temperature range,
- reduced risk of leaks and the pressure drop in the system,
- safer working for the operator - limited risk of skin contact with preparations.
Thanks to the use of Viton, the lance is ideal for:
- regular application plant protection products in orchards and gardens,
- use of disinfectants and biocides in barns, piggeries, poultry houses,
- work with cleaning preparations in car washes, workshops or industrial plants (to the extent permitted by the manufacturer of the means).
Ergonomics, 130 cm length and comfort - precise spraying without bending over
Lance length 130 cm is calculated from the handle to the nozzle. This dimension has been chosen to provide comfortable working distance, necessary for precise, even spraying while reducing the need to bend over or raise your arms too high.
Practical advantages of this length:
- convenient spraying of low and medium plants without excessive bending - ideal for vegetable beds, flowerbeds and lawns,
- easier access to dense crowns of shrubs and small trees - The lance allows you to reach deep into the plants with a jet of liquid,
- safe distance from the sprayed surface - the user does not have to get close to the plants or the disinfected surface, which reduces the risk of accidental contact with the working liquid.
Combined with the low weight of the fiberglass and the well-shaped handle, the lance provides a ergonomic work even during long treatments - such as spraying an entire orchard, a plastic tunnel or a large lawn.
Technical parameters of the lance 130 CM OTH-GSP1874
- Total length of the lance: 130 cm (from handle to nozzle),
- Pipe material: fiberglass (lighter than brass, more durable than aluminum),
- Seals: Viton - high chemical resistance,
- Type of nozzle: adjustable, made of acetal resin (high wear resistance),
- Resilience: high mechanical and chemical resistance,
- Thread: 18 mm thread pitch,
- Connector: plastic connector with a diameter of 10 mm,
- Compatibility: can be connected to most sprayers on the market, especially recommended for Pulmic and Keeper sprayers,
- Purpose: horticultural, agricultural, orchard, municipal spraying, disinfection and biocidal treatments (as recommended by the manufacturers of the products).
FAQ - Frequently asked questions about LANCA 130 CM OTH-GSP1874
1. Does the 130 CM lance OTH-GSP1874 fit my sprayer?
The lance has a a plastic connector with a diameter of 10 mm and thread with a pitch of 18 mm. This is standard on many horticultural and professional sprayers. In practice, the lance fits most models available on the market, in particular, the sprayer brands Pulmic i Keeper. If in doubt, compare the diameter and type of connection on your sprayer with the parameters of the lance.
2. For what kind of work this lance will work best?
The lance is versatile - it is ideal for protective spraying of plants (fungicides, insecticides, herbicides), as well as for disinfection of rooms,decontamination of surfaces and treatments with selected cleaners and biocides. Thanks to the adjustable nozzle, you can match the nature of the jet to a specific task.
3. Is the lance resistant to aggressive chemicals?
Yes, the lance is designed to work with a variety of chemicals. Fiberglass pipe is resistant to corrosion, acetal resin nozzle demonstrates high resistance to abrasion and many chemicals, while the viton seals are valued for their very good chemical resistance. However, always check the recommendations of the manufacturer of the preparations used and adjust the way you work according to the instructions.
4. Isn't the 130 cm length too long for working in a small garden?
The length of 130 cm is a universal compromise - it allows you to maintain a comfortable distance from the sprayed plants and surfaces, while not hindering maneuvering in narrower passages. In a small garden, the lance allows you to conveniently spray flower beds, beds, shrubs and small trees without having to bend down and get in between plants.
5. How to take care of a lance to make it last as long as possible?
After finishing work, it is a good idea to rinse the lance with clean water, to remove residual chemicals from inside the pipe and nozzle. It is also recommended to periodically check the condition of the seals and keep the joint and threads clean. Store the lance in a dry place, away from direct sunlight and high temperatures - this will keep its properties for a long time.
6. Can this lance be used with a battery sprayer?
Yes, as long as the battery sprayer has a a suitable 10 mm connector and 18 mm thread, lance will work with it. The low weight of the fiberglass lance is an added advantage when working with cordless sprayers, which are often used for long periods of time without interruption.
7. Is the nozzle interchangeable?
The nozzle is adjustable and seated so that it can be removed for service or replacement (depending on the specific configuration and system of the sprayer manufacturer). In most cases, the user can unscrew it for cleaning or replace it with another type of nozzle compatible with the particular system.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.