POND BRUSH TO REMOVE WATER LASH OO-HOZ1755
- Professional telescopic brush OO-HOZ1755 for pond. Effectively removes water lash, algae and debris from garden ponds. Length up to 180 cm, lightweight, durable, chemical-free. Ideal for pond and pond care.
Pond brush for removing water lash OO-HOZ1755 - professional, fast and safe cleaning of garden pond
What is the pond brush for removing water lash OO-HOZ1755?
Pond brush for water lash removal OO-HOZ1755 is a specialized telescopic tool designed for owners of ponds, garden ponds and small water bodies. Enables fast, mechanical removal of water lash, filamentous algae and other contaminants from the water surface and from hard-to-reach corners of the tank - without the need for aggressive chemicals.
Sturdy, durable brush head is paired with a lightweight, adjustable telescopic handle. As a result, the brush provides comfortable and safe cleaning even in deeper or larger ponds, without entering the water. It is the ideal solution for those who want to maintain a crystal-clear water surface, a neat appearance of banks and aquatic plants, and proper living conditions for fish and aquatic organisms.
Telescopic brush for removing water lash from pond.
Key advantages include:
- Extendable up to 180 cm to reach the farthest points of the pond
- Durable brush head for long-lasting use
Where to install and how to use the OO-HOZ1755 brush in a pond?
The OO-HOZ1755 brush is ready to use right out of the box - no complicated assembly or additional components required. The brush head is factory-set on a lightweight, telescoping handle that can be smoothly extended to approx approx. 180 cm long. This will allow you to reach central parts of the pond and hard-to-reach places near stones, plants or cascades.
To start cleaning, simply:
- Set a comfortable length of the handle, adapted to the size of the tank.
- Gently dip the head of the brush into the water, directing it toward clusters of water lash or algae.
- With slow movements, scrape the water lash and debris, pulling them to the shore or into the net.
Examples of use in daily eye care:
- Regularly clean the water table of lash and small leaves to improve the aesthetics of the garden.
- Removal of algae from around ornamental stones, waterfalls or fountain nozzles, which prevents clogging of the system.
- Safe cleaning near aquatic plants without damaging them - the brush allows you to precisely scrape away unwanted deposits.
The brush is not mounted "permanently" in the pond - it is a mobile tool that you store in a utility room, garage or tool house, and pull out whenever you see the first signs of water lash or algae growth.
Use of telescopic brush OO-HOZ1755 in the garden and around the house
Pond brush OO-HOZ1755 has a wide range of applications in the care of water bodies and garden surroundings. Its main task is to mechanical removal of the water lash, that is, small floating plants that can cover the entire surface of the water in a short time, cutting off light and oxygen to the organisms living in the pond.
Typical applications:
- Water ponds and ornamental ponds - Regular cleaning of the water surface, banks and the area near plants.
- Small swimming ponds - Removal of algae and eyewash from water entry points to improve user comfort and safety.
- Backyard tanks and decorative water containers - cleaning of barrels, stone troughs or mini ponds by the terrace.
In practice, the brush is also great for cleaning work around the pond - you can use it to gently slide leaves off stone edges that are firmly attached to the water surface, or remove the remains of plants that are beginning to rot in the coastal zone. This reduces the risk of excessive algae growth and improves water clarity.
Telescopic brush OO-HOZ1755 - quality, durability and convenience of use
The OO-HOZ1755 pond brush for water lash removal is designed for multi-season use. Durable head made of water-resistant synthetic fibers retains its properties even with frequent contact with water, UV radiation and organic deposits.
Three key features for durability and comfort:
- Solid brush head - resistant to deformation, does not soften in water and effectively collects water lash and algae. For example, even after intensive cleaning of a tank of several square meters, the fibers remain rigid and effective.
- Lightweight, telescoping handle - allows comfortable handling of the brush without putting too much strain on the wrists and back. Ideal for regular cleanup work, such as weekly lash collection during the summer season.
- Adjustable length to approx. 180 cm - allows the tool to fit both small ponds at the terrace and larger garden ponds. This allows you to clean different tanks with one universal tool.
As a result, the OO-HOZ1755 brush is a purchase for years - it will work well in the hands of private users, but also in the hands of gardening companies that professionally take care of gardens with ponds.
Comfortable cleaning without chemicals - benefits for fish and aquatic plants
One of the most important advantages of using the OO-HOZ1755 pond brush is the ability to reduce or completely abandon the use of chemical preparations to combat water lash and algae. Mechanical cleaning of the water surface is safe for fish, plants, amphibians and beneficial microorganisms responsible for the natural biological balance in the tank.
Benefits from the user's point of view:
- No risk of chemical overdose and associated consequences for wildlife.
- Ability to remove the eyelash immediately - just reach for the brush as soon as the first clusters appear on the water.
- Better well-being of fish - more oxygen and light due to exposed water surface.
For example, on sunny summer days, water lash can grow very quickly, forming a thick sheepskin on the surface of the pond. A few minutes of work with the OO-HOZ1755 brush can restore a clear view of the water and protect the tank from further invasion by floating plants.
Technical data of pond brush OO-HOZ1755
- Model: OO-HOZ1755
- Purpose: removal of water lash, algae and pollutants from ponds and ponds
- Type of tool: telescopic brush for water tank maintenance
- Working length: till about. 180 cm (telescopic handle)
- Shank material: lightweight, corrosion-resistant material (such as aluminum / plastic)
- Brush head: durable water-resistant synthetic fibers
- Color: silver-black
- Product code: OO-HOZ1755
- EAN: 5010646055253
Technical data may vary minimally depending on the production batch, but the main performance parameters - telescopic handle to approx. 180 cm and durable cleaning head - remain unchanged, guaranteeing comfort and efficiency of work.
Why choose the OO-HOZ1755 brush for your pond?
Choosing the right pond care tool translates directly into the appearance of the garden and the health of the entire aquatic ecosystem. The OO-HOZ1755 brush stands out from simple, amateur solutions thanks to its combination of professional efficiency, convenience of use and high durability.
Key customer benefits:
- Saving time - quick removal of water lash and algae without draining water or installing additional equipment.
- Convenience of work - The telescopic handle allows you to clean the mesh in a standing position, without stepping into the water, which is important especially in colder weather.
- Long-term use - solid construction and resistant materials make the brush will serve for many seasons, even with intensive use.
This makes the OO-HOZ1755 pond brush for water lash removal an ideal choice for both novice pond enthusiasts and experienced gardeners who want reliable, proven solutions.
FAQ - Frequently asked questions about the OO-HOZ1755 pond brush
Question 1: Is the OO-HOZ1755 brush suitable for any type of pond??
Yes, the brush is versatile and will work well in most backyard ponds, ornamental ponds and smaller swimming ponds. Thanks to the adjustable length of the handle, you can fit it to both small and larger tanks.
Question 2: How often should I use a brush to remove a water lash?
During the spring and summer season, it is a good idea to inspect the water surface every few days and remove the eyelash or algae as soon as you notice the first clusters. Regular, short treatments are more effective and less labor-intensive than a one-time, lengthy cleaning of a neglected tank.
Question 3: Can using a brush harm fish or aquatic plants??
With proper, gentle use - not. Brush mainly removes floating plants and algae from water surface. However, it is worth avoiding too sudden movements near delicate ornamental plants and places where fish often stay near the shore.
Question 4: Does the brush require any maintenance?
After finishing work, it is recommended to rinse the brush head with clean water and leave it to dry. The handle is best stored in a dry place, folded to the minimum length. Such simple care significantly extends the life of the tool.
Question 5: Will the OO-HOZ1755 brush replace filters and other equipment for the pond?
No, the brush is an addition to, not a replacement for, the filtration system. Used for fast, mechanical removal of water lash, algae and debris from the water surface and banks. However, in combination with a proper filter and aeration, it provides much better clarity and condition of the whole tank.
WARRANTY TERMS AND CONDITIONS
For warranty terms and conditions, please refer to the instruction manual included in the device packaging. Devices covered by the extended warranty (3 and 5 years) require the execution of the mandatory warranty inspections (payable) at the times specified in the warranty terms and conditions.
The obligations of the guarantor under the guarantee are to repair the defective goods, the advertised device is not subject to replacement or cash back.
1. The manufacturer guarantees its products for a period of time:
- Oleo-Mac internal combustion mowers 60 months for consumer use and 12 months otherwise
- Oleo-Mac chainsaws, Oleo-Mac scythes, Oleo-Mac electric mowers, Oleo-Mac trimmers
TR 61 E and TR 91 E, garden tractors. EMAK K-series internal combustion engines powering mowers and
tractors 36 months for consumer use and in other cases 12 months
- Other devices for consumer use 24 months and in other cases 12 months
Additional consumer warranty on Briggs&Stratton engines after the expiration of the manufacturer's warranty period of 12 months -
The condition for maintaining the 36-month warranty period is to perform two paid inspections of the device at an authorized service center - in 12 and 24 month from the date of purchase no later than 7 days after the specified date.
As a condition for maintaining the 60-month warranty period, four paid inspections of the device must be performed at an authorized service center - at 12, 24,36 and 48 months from the date of purchase no later than 7 days after the appointed date. All inspections performed by the dealer must be recorded in the electronic
b2B guarantee settlement system. Internal combustion engines of other brands (Briggs & Stratton, HONDA, KAWASAKI, SUBARU, etc.).) and hydrostatic transmissions are covered by a separate warranty manufacturer. Details of the warranty terms and conditions are contained in separate manuals for the listed components.
2. The warranty covers all damages occurring during the warranty period resulting from the discovery of latent material defects during this period, assembly or technological.
3. The technical staff will proceed with the repair in the time allowed by organizational requirements, always as soon as possible.
4. The choice of how to remove the damage is up to the guarantor, who can remove the defect by repairing the device or replacing the damaged part. Regardless
way of removing the damage, the warranty continues, extended by the time of removal of the damage by the guarantor.
5. Warranty repair can only be carried out on the basis of the device registration in the B2B system or a valid warranty card with proof of purchase.
Failure to register the device, the warranty card or its cancellation will exclude the guarantor's liability under the warranty provided.
6. The user has the right to appeal against the decision of the service point regarding the qualification of the reported failure. The appeal must be submitted only in the form of in writing with a set of documents stating the course of repairs made and a description of the technical condition of the equipment at the time of the original inspection made by the service point.
7. The warranty period is extended by the time necessary for warranty repair. The dates posted on the claim in the b2B electronic guarantee settlement system.
8. The repair shop is required to make entries regarding the scope of warranty repairs in the B2B electronic warranty billing system.
9. For paid repairs performed, the guarantor provides a 3-month warranty on the condition that the repair is carried out in the guarantor's workshop and that the repair is used for the repair original spare parts. The basis for the claim is the proof of purchase of parts and the service performed.
10. Warranty repair is not subject to: damage caused by improper operation, damage caused by using the device for purposes for which it is not intended, damage caused by the use of improper consumables, mechanical damage, and
caused by improper transportation or storage, damage caused by lack of maintenance, components that have suffered wear and tear in service during proper operation.
11. The warranty is voided as a result of structural changes or modifications made by the user, as a result of interference found by the service point
inside the device by unauthorized persons, as a result of breaking or dismantling the carburetor adjustment locks, in the event that entries are found to have been made in the warranty card by unauthorized persons.
12. The warranty does not cover consumable items and items that wear out during the warranty period, such as:
- Consumable components, e.g.: cutting blades, discs, cutting bars, vee heads, filters, starter cables, spark plugs, bulbs, wheels, drums and clutch jaws,
clutches and friction discs, drive belts, safety bolts, cutting chains and guides, high-pressure washer lances.
- Engine components: cylinders, pistons, rings, crankshaft, bearings, pan, carburetor diaphragms.
- Other consumable parts: knife hubs, safety keyways, shock absorbers, bearings, pan, gears, overload fuses, carbon brushes, control ties and cables
- Starting batteries used in machines with an electric starter
- Components not mentioned in these warranty conditions , which obviously wear out during operation, transportation and storage (such as coating painting).
13. Warranty repair does not include installation, adjustment and maintenance activities.
14. Damage such as engine seizure, bent or cracked crankshaft, broken magnet wheel keyway or knife hub are not repairable warranty.
15. If the service center does not fulfill its obligations, the user is obliged to inform the guarantor of this fact. Refusal to comply repair by the service center must be entered in the warranty card. If the guarantor does not recognize the repair as a warranty repair, the cost of repair and transport is covered by the claimant.
16. Defective spare parts replaced under warranty repair are the property of the guarantor.
17. Complaint should be reported to the nearest authorized service center or directly to the guarantor. Reporting a complaint at the point of sale may cause an increase in repair time.
18. During the reception of the device after warranty repair, it is his duty to make sure that the received device is complete and undamaged. The repair point has the obligation to start the device before handing it over to the user after repair.
19. The service point has the right to charge a fee for performing maintenance activities that are the responsibility of the user and require them to be performed before the proceeding with the repair. The repair shop is obliged to replace, at the user's expense, all components that ensure the safety of the work, which have been damaged damage during operation regardless of the consent of the user.
20. A continuously updated list of service points can be found at www.victus.en
21. The warranty for the goods sold does not exclude, limit or suspend the buyer's rights under the warranty provisions for defects in the goods sold.
22. The cost of an unjustified complaint is paid by the complainant.
23. This warranty is valid in the territory of the Republic of Poland.
24. Any damage caused during transport should be immediately reported to the carrier under penalty of voiding the warranty.
25. The warranty does not cover possible damages caused directly or indirectly to persons or things due to defects in the device or resulting from prolonged downtime in the operation of the device.